English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Maintenance & Repairs - April 2007

[Selected]: All categories Cars & Transportation Maintenance & Repairs

we have replaced the battery, alternator, spark plugs, and the wiring harness but the car will stall if we take it out of the drive way. it will idle at a stand still fine and continue to run but once it is taken out on the road it dies. i am eight months pregnant and could go any time and need our car, its our only one and we dont have any friends that are mechanically inclined!

2007-04-14 04:18:00 · 7 answers · asked by best step mommy in the world 1

No sound from speakers. I checked all fuses. Radio has power and everything works on radio, but no sound. Also no warning sound in 15 sec. relay when door is locked.

2007-04-14 04:08:50 · 3 answers · asked by statisticwiz 1

i have no tail lights or dash lights and my lights wont go up or down

2007-04-14 03:59:18 · 7 answers · asked by edward b 1

It shifts from park into each gear, but I can barely feel it at all when I shift. The only way that I know which gear I'm in is through experience in driving automatic transmission cars. My gear display panel shows the car as being in reverse when I have it in park. If I press the accelerator hard enough, I see a little bit of smoke/smell hot transmission fluid whenever I stop at a light. Are these common symptoms for a older car, and what can I do to fix the problems? I am mechanically enclined so any tips will help. Thanks in advance.

2007-04-14 03:48:26 · 10 answers · asked by dr phil 2

when i open the ecu computer it is allways the injector circuit that is burnt. could some one tell me what is causing this to happen

2007-04-14 03:46:17 · 2 answers · asked by cassa 1

When a cars battery runs out of energy and you use another car to give it energy with jumper cables. Does the good car feed the bad car with energy from its battery? The longer I leave it plugged and running does it charge more or is it a waste of time?

2007-04-14 03:43:07 · 9 answers · asked by talent4god 2

i have checked the fuses and put gas in it even put elct. fuel pump staight 2 the carb.i have also put a knew battery on my car

2007-04-14 01:45:00 · 4 answers · asked by sexy4ubaby2001 1

I took the 2001 Dodge Grand Caravan in for an oil change. Dealer informed me that the transmission solenoid is leaking and needs to be replaced. Where is this part located? Is it inside the transmission or outside? How difficult would it be to replace?

2007-04-14 01:42:48 · 2 answers · asked by David M 2

what is the difference between gelcoat Cutting compound and clear coat cutting compound in terms of abrasivness.

is it safe to use T-Cut that is designed for gelcoat on a clear coat finish ?

2007-04-14 00:39:16 · 2 answers · asked by al.bdour 2

the bulb itself is ok

2007-04-13 23:12:44 · 9 answers · asked by joyenergizeruk 2

If so what is the best way to do it & what product should i use to flush the engine & its old oil ?

2007-04-13 22:45:08 · 7 answers · asked by Anonymous

i tried the whole locking and unlocking the drivers side with the key but it doesnt work!.. unless im doing it wrong.. do i have to have the battery connected or disconnected?.. if someone can give me step-by-step instructions that'll be pritty good.. i've been trying to fix it for the past few days but all i get is the extremely loud alarm.. its a bit annoying..

2007-04-13 21:36:56 · 3 answers · asked by benjeh... 2

i have a 97 pontiac sunfire and it came with a remote to lock and unlock the car. the lock button works ok, but the unlock button doesnt work so well. i tried to get new batteries and that didnt work. what should i do?

2007-04-13 18:50:56 · 4 answers · asked by its not gay if... 2

There are 2 sets of Blue H13 headlight bulbs i am looking at to purchase. I just need to know which set is the better of the two. The first set are 80W/100W with 6100k color temp. The second set are 90w/100w with a 5000k color temp. Which set would be better based on the wattage and Color temp. If you need any info let me know.

2007-04-13 18:41:48 · 4 answers · asked by SPEEDY 4

Hi when i push on my brakes it makes a hissing sound but no braking and then goes firm and brakes if you push hard. Whats wrong ? could there be air in the system cos its been garaged for the last year? fluid level ok in master cylinder. THanks

2007-04-13 18:29:16 · 17 answers · asked by hemal 1

My Camry will not start, and it is not a power problem - the radios/cd player/aircon works fine. When I try to start it, I get a strange high pitched click-click-click sound, not the usual low brrrbrrrbrr sound. Anyone know what is wrong?

2007-04-13 18:27:24 · 8 answers · asked by Anonymous

I asked before are batteries easy to install and it was quite simple..I have replaced flat tires before so i just wanted to know is it difficult to remove and replace brake pads and rotors?

2007-04-13 17:35:48 · 7 answers · asked by Jack O' Lantern 3

I guess it happens every day but can a mechanic charge you a fee even he didn't fixed your beaten up car ? What is the bottom line ? Why they do that ?

2007-04-13 17:20:48 · 6 answers · asked by pedrofariaslozano 2

Do i seriously need a Hi flow cat converter?? Every where i look i see Hi Flow cat converter, But what about the regular ones? Whats that called and is it less better than a hi Flow??And whats the difference??

2007-04-13 16:38:48 · 6 answers · asked by franckoboy 3

do i have to buy a new one if so from where.

2007-04-13 16:22:37 · 7 answers · asked by reddragon21321 2

ok i just purchased a 94 honda accord coupe lx 11april 07 when i first got into the car and put the key in the ignition for the test drive it put up a bit of a struggle the sales rep informed me that there was a trick to it that i had to push it in to crank it, it still put up a bit of a struggle but once it turned it prrrr'd like a kitten and ran like a dream i drove it to the car wash mcdonalds ect ect the point being i took the key out several times in 3 days and it crunk up no problem now all of the sudden out of the blue my steering wheel locked up and wont unlock and the key wont turn past the first dot no matter how i try, the autozone guy tipped me of that it could be the ignition cylinder but i just want to make sure before i give them $160 and $95 to a local mechanic or give o'reilly's $120 for the same part , i also noticed push buttons starters maybe after i put the new ign. to prevent this problem in the future from ruff or flimsy ignition cylinders

2007-04-13 16:20:21 · 4 answers · asked by PT 2

2007-04-13 16:10:47 · 15 answers · asked by Guy 1

what engine should i buy briggs&stratton or techumseh or robin or honda any tips im going to put a torque converter

2007-04-13 15:54:56 · 7 answers · asked by Anonymous

2007-04-13 14:05:43 · 6 answers · asked by soulofdherb 1

Looking into tires for our Dodge Ram 1500 truck. Are 245/75 R16 tires the same as 265/75 R16 tires? One is a Goodyear (245) and one is a Mastercraft (265).

2007-04-13 13:28:28 · 5 answers · asked by Anonymous

I'm going on a roadtrip and I need something to protect my car's body paint from scratches due to the sandy wind and high speed. I was told to use "white lithium grease". will it hurnt my paint? Is there something better I should use?? please give as much info as u can, thanks!

2007-04-13 13:28:22 · 3 answers · asked by Daydreamer 1

I'm looking for a good wiring diagram for a 1968 Mustang. I need both the engine side and the instrument side if possible. Also any advice on where to install the engine ground strap would be greatly appreciated. Thanks in advance for any help.

2007-04-13 13:19:18 · 4 answers · asked by Smitty 1

I was planing on puting one right after the catalic converter. I have a 1998 Chevy 1500 V6 4.3 liter pickup. I have heard that a V6 just sounds like crap and I was wondering if that is only if it goes through the muffler and the rest of the exhaust piping.

2007-04-13 13:14:04 · 9 answers · asked by Cole C 1

fedest.com, questions and answers