Maintenance & Repairs - March 2007

i have a 93 blazer i thought the fuel pump was bad but i can here it kick in but my truck wont start. it started yesterday but wont sart today any clues what could be wrong

2007-03-02 12:33:10 · 8 answers · asked by JENNIFER R 1

I have a 2002 Acura RSX with 58k miles on it
The Serpentine Belt seems to be very worn and i don't notice any rips but it is very rusty looking and it seems that when spinning if it gets wet its throw a rust color substance on the top of my hood while spinning.
It also seems to be making a lot of noise. a very high pitched squeak only when the car is in park or very slow but once speeds up the noise is not noticeable. Any way i could get rid of that noise too? thanks

2007-03-02 12:28:35 · 10 answers · asked by john m 1

2007-03-02 12:12:14 · 4 answers · asked by rainesgg 1

i want to convert my lancer to rear wheel drive how much would it be

2007-03-02 12:06:06 · 14 answers · asked by jonnyfabes99 1

I have a 2004 Toyota Highlander Front-wheel drive. I feel a slight thump in the steering wheel when I turn it almost all the way right or left. Any ideas?

2007-03-02 12:01:53 · 5 answers · asked by Anonymous

I want to find out that first , and then I want to see if maybe it is a fuel issue, but I heard something of holding a spark wire about an inch from the spark,then have someone turn the key and if it sparks then that eliminates the ignition concern.

2007-03-02 12:00:36 · 4 answers · asked by Anonymous

am building a 505 ci tall deck chevy w/ 365 cc intake runners Brodix heads-as much compression as I can get easily [13.5 /1] and good rods and crank. I need some hints on specs for a solid roller that will be used for a pulling truck.I need 8000 rpms for wheel speed and a good torque output.

2007-03-02 11:59:06 · 3 answers · asked by Ricky G 1

2007-03-02 11:48:11 · 6 answers · asked by mahesh m 1

i bought my jeep almost a year ago and i've been doing ALL of my oil changes at the dealer. the dealer is like a 30-minute drive from my house (really out of my way). the manual says go to the dealer, but do i necessarily HAVE to? or could i just go to MIDAS or something?

2007-03-02 11:19:15 · 23 answers · asked by brian f 1

I had an accident and passenger's airbag did not deploy. The seat was empty. Do cars have sensors in the seat in order to control the airbag? It was a 2006 Mustang.

.

2007-03-02 11:05:27 · 13 answers · asked by rob1963man 5

I have a stock 1998 F-150 4X4 with 17in rims, will they fit also without a lift kit.

2007-03-02 11:04:58 · 7 answers · asked by Anonymous

2001 Sebring, the rear canvas portion is coming undone from the glass and I need to fix before I ship it overseas.

2007-03-02 10:51:23 · 1 answers · asked by Brandon 4

A chipmunk keeps getting into my car (under the hood). It is causing serious damage to the car. The Auto Shop guy has no idea how to keep the animal OUT of the car. Any ideas? I do not have electricity where I park the car so I cannot put a rodent deterent alarm. HELP this is costing me hundreds of dollars every few months...

2007-03-02 10:48:11 · 8 answers · asked by Anonymous

i have a 95 chev sub 5.7 l. new alternator, new battery. i am having problems keeping my battery charged. it will be at 12.8 v when i leave to go to work but when i get to work about 40 miles it will be a t 11.9 v. one thing i noticed is when i press down on the brakes the engine makes a different noise like it loses power. i am also having problems with my rear lighting. is there a corelation between braking and my battery not keeping its charge? i do have a small draw coming from somewhere but overnight it doesnt really do alot to the voltage, maybe .3-.5 loss. please list every suggestion you can think of, i mean anything.

thank you

2007-03-02 10:47:22 · 6 answers · asked by concessions06 1

I've been using Armor All but I've recently been told by auto specialists that the sun heats the oil in the compound and basically, slowly fries the plastic and shortens the life of the exposed surfaces. So what does the job without the damage?

2007-03-02 10:39:54 · 6 answers · asked by Brandon 4

what mig welder is better lincon or miller my lincon keeps on getting stuck

2007-03-02 10:26:37 · 4 answers · asked by gustvh2001 3

having trouble removing two crews that are on the disk brake

2007-03-02 10:16:40 · 1 answers · asked by Mr.E 2

The doors are closed tightly and the Door adjar light comes on. The locks lock and unlock automatically and the windows go up and down by themselves constantly. I checked fuses, but I read they have breakers too that I can not locate.

2007-03-02 10:12:42 · 3 answers · asked by Knats1 2

While driving without warning and no gas light on the engine shuts off when the gas reaches quarter tank. Fill up and I'm good to go again.. Replaced the fuel pump but it didn't help, problem still reocurring... I guess I'll just have to always have a full tank..Not with these gas prices

2007-03-02 10:11:45 · 6 answers · asked by Carol P 1

I have an overloaded truck pulling a trailer. I am worried about burning out the clutch as I smell something burning when pushing it hard.

2007-03-02 10:08:57 · 6 answers · asked by Dave W 1

I just purchased a 2003 saturn L200. I had read that it had multiple parts recalled. How do I find out if the parts were replaced on my vehicle? If they haven't been can I still get them replaced?

2007-03-02 10:06:39 · 7 answers · asked by belle 2

I replaced front rotors, pads, rear shoes and rear cylinders. Brakes catch when I first apply but if I ease off a little and tap on them again they go to the floor and I have nothing. I have had the brakes bled twice and one guys says it's the abs sensors and the other guy says its the master cylinder. Anyone got any answers for me??

2007-03-02 10:04:17 · 4 answers · asked by Kevin B 1

Car dosen't shift from park to reverse or drive

2007-03-02 10:00:24 · 5 answers · asked by Crawfish Lover 1

My 2004 Toyota Highlander makes a thump I feel slightly in the steering wheel when it is turned almost all the way in either direction.

2007-03-02 09:52:42 · 1 answers · asked by Anonymous

I recently took on the job of rebuilding an auto trans. All works well I have gotten rid of all of the codes. (governor pressure solonoid and sensor) It shifts fine 1st thru 3rd. I can't get it to shift into overdrive. It is giving no codes. it's a 2001 dodge ram 5.2L by the way

2007-03-02 09:49:19 · 1 answers · asked by bel81gre 1

2007-03-02 09:46:19 · 4 answers · asked by super b 4

goodyear eagle ultra grip gw2

2007-03-02 09:39:35 · 3 answers · asked by jimmyhong7 2

My car starts to pull to the left when I'm driving, could this be a sign that my wheel barrens need to be replaced? Or what could be other reasons for this.

2007-03-02 09:37:30 · 6 answers · asked by lilmissheiress 2

But, when I put it in reverse or even neutral the nose goes away. It's not that sqeaky sound that usually is associated with breaks. I read online it could be that the breaks are damp, which could be b/c it rained for 12 hours straight last night into this morning. Any other ideas?

2007-03-02 09:34:40 · 3 answers · asked by Roseann 2

the rev counter jumpes from 4-6000 and is like it allday the next day it could be fine or it will keep stalling on me. when the car is moving it is ok it's just when the car is sitting there i have the problem. HELP ME PLEASE!!!

2007-03-02 09:33:34 · 4 answers · asked by Anonymous