I replaced front rotors, pads, rear shoes and rear cylinders. Brakes catch when I first apply but if I ease off a little and tap on them again they go to the floor and I have nothing. I have had the brakes bled twice and one guys says it's the abs sensors and the other guy says its the master cylinder. Anyone got any answers for me??
2007-03-02 10:04:17 · 4 answers · asked by Kevin B 1 in Cars & Transportation ➔ Maintenance & Repairs
sounds like master cylinder. seals worn out.
2007-03-02 10:09:56 · answer #1 · answered by robert s 5 · 0⤊ 0⤋
I think we need more information to answer this intelligibly. What's the year, make and model? It might be something like an ABS pump, but not the sensors, causing this problem. I'd bet on the master cylinder if the brakes were bled properly.
2007-03-02 10:09:25 · answer #2 · answered by Jay S 3 · 1⤊ 0⤋
Sounds like a sticky valve in the master cylinder to me.
2007-03-02 10:13:36 · answer #3 · answered by Niklaus Pfirsig 6 · 0⤊ 0⤋
you could still have a air pocket in the lines,or it very well could be the master cylinder.it could be by-passing.
2007-03-02 13:34:17 · answer #4 · answered by Anonymous · 0⤊ 0⤋