Maintenance & Repairs - September 2006

Are they made for different engines?

2006-09-20 12:15:21 · 12 answers · asked by Anonymous

MY CAR DRIVES FIND BUT EVERY FEW DAYS IT STALLS AND I HAVE TO LET IT SIT FOR A DAY OR SO THEN IT STARTS AND NO PROBLEMS

2006-09-20 11:38:15 · 2 answers · asked by ssanborn27 1

95 camry 2.2 V4

2006-09-20 11:34:38 · 2 answers · asked by desizfalife 1

I can see a nut on the front of the bracket holding the safety switch but it looks like it is spot welded.

2006-09-20 11:23:47 · 4 answers · asked by Homer 1

2006-09-20 11:14:11 · 13 answers · asked by lds 1

I noticed last nite my radio and clock and in light above me in my 1999 corolla was not working, went to a local auto parts store he put a new fuse in and smoke started to come out from the top of by interior by my light ,it was working but we took out the fuse car runs perfect no other electrical trouble any ideas besides going to a rip off electrical mehanic or can i rought it with out a radio?

2006-09-20 10:58:01 · 4 answers · asked by mrga1024 1

2006-09-20 10:53:54 · 4 answers · asked by Anonymous

I live in Maryland and would like chrome wheels on my Q455, but I like the OEM wheels. Where can I get them dipped?

2006-09-20 10:51:22 · 1 answers · asked by othellonuevo 2

I just recently had an accident with my baby (Cadillac EXT) and there is some side damage and possible duspenion damage.I Icalled in my claim and suggested Solano Collision? Just wanting to know if anyone has information or suggestions?

2006-09-20 10:31:51 · 1 answers · asked by caddygirl143 2

2006-09-20 09:55:09 · 9 answers · asked by █████████████ 2

2006-09-20 09:53:55 · 7 answers · asked by Anonymous

I need to put power steering fluid in the car that I am driving. I should stress that this is not my car, so I can't mess it up! Just driving it while my boyfriend is out of town. I tried calling local auto supply stores, but I called two of them and they both gave me different answers! I don't know who to trust!

2006-09-20 09:49:38 · 8 answers · asked by rlandryg 1

one can just "blow the lines" out with compressed air, ie.... no water no freeze and bust. Any body have experience with this?

2006-09-20 09:49:30 · 5 answers · asked by scarfile 2

My friend has a fixed up turbodiesel with 650 Hp and about 1200 Lb torque. A Corvette has 400 Hp and torque.

The torque-to-weight ratio of the diesel is 5.7
The torque-to-weight ratio on Corvette is 8.3 (worse)

So if he reved up the Diesel to max torque before launch and the Corvette too, who would go off the line faster?

2006-09-20 09:49:27 · 6 answers · asked by Scatman 5

the recharge kit came with instructions but as far as hooking it up to low end of system and making sure the freon is getting into the system, i'm lost. there is a gauge on top of the can and and the hose you hook up to the low end

2006-09-20 09:28:27 · 4 answers · asked by Sexy Ray 3

I want to fix up my 95 two door escort. I know its not the greatest car made, however it runs good. It could use a paint job, a few shocks and springs, but other than that its a pretty decent car that has been very dependable since I have purchased it. I also want to paint it and get some body work done to it. A stereo system and the works. So where do you think i should begin and what should i start fixing first?

2006-09-20 09:26:04 · 7 answers · asked by dat_gurl_dot03 2

and the dail starts to go back down when I drive... Please help!!

2006-09-20 09:19:02 · 14 answers · asked by Anonymous

Replacing the driver side half shaft, any "tricks" to facilitate this(particularly at the transmission side). How hard of a job is it for a back yard mechanic. Any special tools needed to remove the inner cv portion from the tranny.

2006-09-20 09:11:30 · 9 answers · asked by ricky2855 1

I've seen these electrolysis devices for sale and I really don't think they would work. Is anyone using one of these devices and how is it working?? I've got a friend who purchased one and is putting it on his truck...
FYI: I'm not thinking about running off 100% hydrogen, but the Brown's Gas that is produced when water is electrolyzed
such as the system here at www.savefuel.ca

We'll see what happens...My bet is that it isn't gonna work though...

2006-09-20 09:03:45 · 2 answers · asked by tallfarmboy 2

2006-09-20 09:02:28 · 3 answers · asked by Anonymous

I have a 94 Nissan Sentra that runs fine but when i go to move the shifter out of park into another gear it just wont go. I used to be able to pump the brakes and listen for a click until the shifter unlocked but now it wont even do that. Please help if you can

2006-09-20 09:02:11 · 7 answers · asked by imsummie 1

Specifically, Turtle Wax paste. Just add water and let sit for awhile?

2006-09-20 08:58:11 · 4 answers · asked by bikerchickjill 5

how do you make the gap smaller. i know how to make it biger but i need to find out how to make it smaller, from a .060 to a .040 help?

2006-09-20 08:58:06 · 7 answers · asked by Anonymous

One that will make it shine like new, and one that is safe for simonize. A good trusted brand. One that will make it look just like the professional's job.

2006-09-20 08:57:37 · 8 answers · asked by Anonymous

Suddenly while moving in reverse the rpm went up to 2000 rpm instead of 700-800 as usual. I got good answers, most of them relating the problem with vacum cause, or IAC dirty. I checked possible vacum leaks and cleaned the IAC. When I started the engine noticed the maniflow (headers) turned RED. I asked a good mechanic in Mexico (as my car is mexican made) and told me to check the cathalitic convertors. (I live in the Houston area) WHat´s wrong with my car?

2006-09-20 08:40:02 · 5 answers · asked by Rene 4

the recharge kit came with instructions but as far as hooking it up to high end of system and making sure the freon is getting into the system, i'm lost. there is a gauge on top of the can and and the hose you hook up to the high end

2006-09-20 08:22:47 · 3 answers · asked by Sexy Ray 3

Will a Ford Taurus transmission fit into a Ford Windstar? Is the transmission the same if the part is the same year?

2006-09-20 08:17:47 · 4 answers · asked by Rayann C 1

display saids security system disable start remove key

2006-09-20 08:14:19 · 4 answers · asked by dre_theman2 1

I have all the equipment and tools to do the job, and am a very good welder and fabricator, just whant your opinion on which way I should go, you thoughts are welcome.

2006-09-20 08:12:39 · 7 answers · asked by Ynot??? 2

Change from gen-2 to gen-6 454 block, Put high rise on with750 cfm carb, Engine was computer controlled, Now conventional distribator, what is the timing degree for gen-6 long block?

2006-09-20 08:02:37 · 2 answers · asked by Richard L 1