Hardware - May 2007

2007-05-19 00:57:22 · 2 answers · asked by Kathy H 1 in Printers

2007-05-19 00:55:06 · 1 answers · asked by blatchi 1 in Laptops & Notebooks

please advise me ...teach me

2007-05-19 00:42:09 · 9 answers · asked by naing m 1 in Other - Hardware

When I try to boot my laptop tru. XP cd I am getting the following messages.

setup did not find any hard dik drives installed in your computer.


Please somebody help me.

Thanks

2007-05-19 00:35:08 · 6 answers · asked by Anonymous in Laptops & Notebooks

on which site i can get the details about it

2007-05-19 00:15:29 · 3 answers · asked by shashank k 1 in Add-ons

I use a Seagate external hard drive with my iBook G4. There are several folders on it, but there is one that I refer to often and have therefore placed in the "sidebar" of Finder.

Recently I turned off the Seagate for a long time (maybe 2 to 3 weeks) and I've just plugged it in again. Everything works normally...all the folders can be accessed, except for the folder in my Finder bar. When I try to access it, it tells me that the volume can't be found, although all the other folders work fine. The folder icon of that particular folder has also turned to the Network icon (that blue sphere within a square) and it's labelled as an Alias (0 KB).

What has happened? Have I lost all my data? How do I recover the folder?

2007-05-19 00:13:09 · 2 answers · asked by ninjaaa! 5 in Laptops & Notebooks

I OPTING FOR A NEW HDD
I NEED YOU RECOMMENDATIONS

2007-05-19 00:12:02 · 10 answers · asked by Anonymous in Other - Hardware

Hi guys,
i wanted to know how can i change the first screen i see when i switch on my HP laptop.It is displayed only for a few seconds and has the manufacturers logo but m having a difficult time changing it.I searched all over the net and all i got is how to change the boot screen or welcome screen. i m using windows XP and this screen is not the bootscreen as it comes before the bootscreen and displays the HP logo for a few seconds.You will understand if you use a branded pc and not an assembled pc as all branded ones have this screen on the start.Plz help!!!

2007-05-19 00:02:20 · 2 answers · asked by SidRock 1 in Other - Hardware

I only have USB 1.1 on my laptop (so I cannot connect any more internal hardwawre). Is there anyway that I can get some sort of external hardware that allows me to use USB 2.0? Im guessing not, but I do not know everything! Hence the question.

Any advice will be much appreciated.

2007-05-18 23:47:15 · 3 answers · asked by apadar 2 in Other - Hardware

everytime i restart vista, it takes the low display resolution
so i have to readjust it everytime i reboot... any suggestions

2007-05-18 23:47:03 · 5 answers · asked by slimmy 2 in Desktops

I have an AMD 64 x2 processor and a K9N NEO-f motherboard. Is my computer 32 bit or 64 bit?

2007-05-18 23:46:30 · 5 answers · asked by peter 2 in Desktops

2007-05-18 23:39:05 · 8 answers · asked by Anonymous in Laptops & Notebooks

built in ethernet adapter not being detected by windows xp

2007-05-18 23:02:24 · 4 answers · asked by texchic1978 1 in Desktops

I have a HP laptop with an OEM seupof XP home.
prob is it only has ONE single 103 GB partition.is there Anyway to partition the disk into smaller partitions without reinstalling XP/formatting disk ?

2007-05-18 22:53:56 · 7 answers · asked by Viki 1 in Laptops & Notebooks

I have a laptop which i plug into my pc modem to connect to the internet. I still connect but now it says it cannot display the web page I am looking for. When I put the lead back into the PC it works fine. Anybody help??

2007-05-18 22:45:24 · 7 answers · asked by Anonymous in Laptops & Notebooks

does it have dvd or cd burning capability......thank you in advance for your answers..........

2007-05-18 22:41:34 · 3 answers · asked by Anonymous in Add-ons

I just wanted to know that how can i change the screen i see when i first switch on my laptop.I have Windows XP installed.Usually its the manufacturers logo but i want to change it.I searched for it on the net but all i got was changing boot screens and welcome screens.So if anybody can tell me i would greatly appreciate your help.

2007-05-18 22:41:11 · 3 answers · asked by SidRock 1 in Monitors

2007-05-18 22:35:13 · 7 answers · asked by the_quiet_storm2 3 in Laptops & Notebooks

2007-05-18 22:34:31 · 4 answers · asked by reggie a 1 in Laptops & Notebooks

2007-05-18 22:21:14 · 4 answers · asked by mangesh p 1 in Other - Hardware

want a smps used one from any one who has any old smps for pentium 3 computer can anyone help me

2007-05-18 22:15:32 · 1 answers · asked by sashinfi 2 in Desktops

My note PC's Enter Key,delete key, back space key etc don't works

2007-05-18 22:13:17 · 6 answers · asked by Anonymous in Other - Hardware

2007-05-18 21:48:59 · 16 answers · asked by Anonymous in Laptops & Notebooks

i am on a budget of 1100$ and i have found these aprts but befor i buy them i want an opinion. any obvious changes or incompatibility.
-intel core 2 duo e6300 processor running at 1.86ghz(i will overclock)
- EVGA 122-CK-NF67-T1 LGA 775 NVIDIA nForce 680i LT SLI ATX motherboard
- G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) ram
-BFG tech geforce 8800gts 640mb gddr3 video card
-Seagate barracuda 320gb 7200rpm hard drive
- COOLER MASTER Centurion 5 CAC-T05-UW Black Aluminum Bezel computer case that comes with 2 fans.
- Rosewill RP550 ATX V1.3/ EPS12V 550W Power Supply(is 550w enough or should i get 600)
- SONY 16X DVD±R DVD Burner With 5X DVD-RAM(is this ok i dont know much about dvd and cd roms/burners.)
- Hauppauge WinTV-PVR 500 MCE White box PCI Interface Personal Video Recorder(to make my computer a dvr)
this totals up to about 1200$, but i think its worth it to spend the extra 100$
any big mistakes i made...something is not compatible
better parts availible

2007-05-18 21:35:27 · 6 answers · asked by Anonymous in Desktops

This is my system configuration

P4 2.66 Ghz HT,1536 MB DDR1 400 MHz Ram and 240 GB harddrive...128 MB Nvidia AGP....


i tweaked some registry values still i'm not getting aero...can someone help me

2007-05-18 21:00:13 · 3 answers · asked by Anonymous in Desktops

I have a NVIDIA nForce chipset ASUS motherboard with onboard GeForce 6150. I'm looking to upgrade graphics performance ... affordably. I'm assuming that I should be looking at PCI-Express cards, since my motherboard supports this.

The only must is DVI output.

2007-05-18 20:57:56 · 3 answers · asked by Misunderst00d 2 in Add-ons

also after it turns back on the command prompt pops up and disappears again

2007-05-18 20:11:53 · 5 answers · asked by imabigkidnow 1 in Desktops

I HAVE A C-STORE ABOUT 100 YARDS IN FRONT OF MY HOUSE THAT HAS CABLE INTERNET ACCESS AND I USE IT AT THE HOUSE WIRELESSLY. THE PROBLEM IS IT DOES NOT WORK WELL UNLESS YOUR BY THE WINDOW. I CAN'T GET CABLE AT THE HOUSE ONLY SATELITE??? DON'T KNOW WHY...SO I NEED TO KNOW WHAT KIND OF EQUIPMENT I CAN ADD TO THE PRE-EXSISTING MOTOROLA SURFBOARD MODEM I USE TO MAKE THE SIGNAL REACH THE HOUSE----FULL FORCE...
I NEED TO PLAY XBOX LIVE IN THE LIVING ROOM THATS NOT BY THE FRONT WINDOW.

2007-05-18 20:09:37 · 7 answers · asked by browho4d 1 in Add-ons

DDR 128x4 PC400 1G AUM1807 is the sticker on the RAM. My computer is a Dell Optipex GX270. Got any ideas? Thanks!

2007-05-18 20:00:16 · 1 answers · asked by KaiserSoze 2 in Add-ons

It is Hynix 1GB 1RX4 PC2-3200R-333-12. I have a Dell Optiplex GX270. The RAM will fit in the slot but the notch in the bottom is in a different place than my slots! My computer takes PC3200 RAM. Any help please???

2007-05-18 19:47:51 · 4 answers · asked by KaiserSoze 2 in Add-ons