I can really use some help on this.
I have put to use an older computer, P3 450mhz, as a music server. It has the original 40 GB HD with window XP and 160 mhz of RAM.
I had a 250GB HD pre-loaded up with music for use in this older computer. I plugged it in to the secondary IDE channel, using the correct jumper on the drive and position on the ribbon cable, for use as the 2nd channel primary drive.
The computer saw the drive, and was able to access all the files on the drive. Problem was that a few files were corrupt or unreadable. So, I pulled the drive, installed it in my good P4 3.6GHZ machine and reloaded all the music.
Now I'm at the point where the P3 only sees some of the drive, wants to run scan disk, says folders are unaccesable, etc.
Properties says that there is 240GB of data on the drive but the P3 can only access a small portion of it. When I let the P3 run scandisk I can access most/all the music, but the file names are mixed up. I've reformatted too.
Help pleas
2007-02-03
09:10:22
·
2 answers
·
asked by
Brian M
1
in
Other - Hardware