Maintenance & Repairs - July 2007

shop put larado parts on a limited and messed up my wash sprayer and then put a brand new bent grill guard on the jeep. imnot happy at all. my head lights dont match now.

2007-07-12 16:55:28 · 9 answers · asked by Angela 1

i want a muffler to be a littler louder and little more flow than stock. can i get this at a local muffler shop. the flow is the most important as i have a big foot.

2007-07-12 16:51:36 · 7 answers · asked by Angela 1

When I accelerate the sound gets higher in pitch, if that helps.

2007-07-12 16:51:01 · 4 answers · asked by Mike 1

I have changed oil and filters used heavier weight oil changed oil pump had bearing checked and was told they were worn engine sounds great when cold but knocks when warm and oil pressure drops. I get oil pressure when driving if I leave the truck in gear being it's a manual and let off the gas but when gas pedal is pressed oil pressure drops again, also when shifting I have oil pressure untell i press in the clutch and nothing and then it builds again untell I have to shift again, all this when engine is warm. When cold sounds and runs beautifully, reads normal oil pressure can I fix it with a rebuilt and any idea what that might cost? Buying a rebuilt engine or getting the engine i have now rebuilt?

2007-07-12 16:33:26 · 4 answers · asked by Anonymous

i need to know weather to buy a 2cycle of 4cycle quad help me!!!! thanks brandon

2007-07-12 16:31:41 · 5 answers · asked by Anonymous

why is one so much cheaper than the other? is there really a differance in the quality of steel? first shop is just one shop and was at first charging 200.00 then dropped it to 160. second shop is a chain. anyone who worked in muffler shops and know why? is it the quality of the steel. im not talking stainless. only steel.

2007-07-12 16:26:30 · 5 answers · asked by babyherc1r 1

i bought a hypertech power programmer plus for gm vehicles from this guy a while back and it was never reset to stock and i have not seen this guy since... i know you can get hypertech to reset them for like 200 dollars but i would rather not have to pay for it again... ?? if there is any way to do this please let me know

2007-07-12 16:18:12 · 1 answers · asked by Anonymous

how do junk yards price there items
i need a cv joint- how much would that cost?
im talking about junk yards where you have to pull the parts yourself

2007-07-12 16:14:53 · 2 answers · asked by Anonymous

2007-07-12 16:13:03 · 9 answers · asked by sunfunwaterman 1

Is there a reliable way to remove both old and new oil spills from my driveway ? My son seems to have a permanent leak and I would appreciate any suggestions to avoid future stains. Please do not suggest that my son park somewhere else or to get his car fixed. I just need to remove the stains and prevent further stains. Would a large piece of Cardboard under his car help ?? Thanks for your answers....

2007-07-12 15:50:59 · 13 answers · asked by Terry R 4

I have already changed the oil pump and that wasn't it I was also told to check the bushings and bearings, the shop that changed my oil pump said that the bearings looked worn but didn't change them as per my request and they are charging me 600 bucks just to change the damn oil pump do you have any ideas as to what i could check into without costing me a small fortune? Any suggestions would be greatly appreciated!!

2007-07-12 15:49:06 · 9 answers · asked by Anonymous

2007-07-12 15:46:35 · 8 answers · asked by mommyinneedofhelp 1

i think i put the fuses in the wrong order. I need to know the correct fuse to put in each spot. including correct amps. If I could get the hood and rear trunk diagrams that would be great. thank you so much......

2007-07-12 15:46:02 · 1 answers · asked by markpete1 1

Am trying to use it to start my 2006 Honda CRV and it just keeps beeping, even after I put in the key and turn it to position I. I already exchanged the product once.... am I going to have to resort to jumper cables?

2007-07-12 15:44:55 · 1 answers · asked by mp_76 1

I drove my car 2 miles at a speed between 20-30mph!! what would happen to my car?

2007-07-12 15:40:49 · 9 answers · asked by Anonymous

1996 chevrolet impala ss

i already had the distributer cap replaced
was told by a mechanic that the knock sensor and knock sensor module needs to be replaced as well as have an additional 02 senser added.

The radio stays on when it cuts off so I know its not the battery

2007-07-12 15:40:02 · 4 answers · asked by romantic_pleasure 2

2007-07-12 15:03:10 · 11 answers · asked by Nsyane W 1

2007-07-12 14:50:48 · 9 answers · asked by gmbrakr 1

My 95 Ford F-150 truck won't back up when it's in reverse. What causes this?

2007-07-12 14:50:35 · 4 answers · asked by Anonymous

Or is this something that me or someone else can do ourselves?

2007-07-12 14:34:48 · 2 answers · asked by Video_Production 6

2007-07-12 14:21:52 · 4 answers · asked by ajyely 2

i need new tires on my car and i am trying to find the best price. does anyone know what is the best place to go for cheap tires?

2007-07-12 14:12:14 · 7 answers · asked by vino75 2

or do you have to buy completely new ones.

2007-07-12 14:03:16 · 11 answers · asked by Anonymous

The ABS light on the dash of my Honda Passport has been on for awhile. I tried disconnecting the battery but it still won't go out. The brakes work fine, just want the light to go out.

Any suggestions? The dealer wants $500 just to diagnose it.

2007-07-12 13:56:10 · 6 answers · asked by Go Baby Baby 1

I think I'm probably going to buy the stripes on ebay and than have a professional put them on. Just in case.

2007-07-12 13:41:23 · 6 answers · asked by Æ 3

I have a set of 18 inch silver wheels on my car, and it seems that they get dirty pretty easily, especially the front wheels. In fact, the front wheels are get dirty quickly and seem to be in worse condition. Any suggestions on how to keep my wheels clean so they can shine?

2007-07-12 13:35:53 · 5 answers · asked by stpaulsabres 2

and please tell me the difference of the oil one so I dont drain that one

I cant find it so I need to know on my car is is one bolt or more than one

91escort lx 1.9L auto

2007-07-12 13:24:23 · 4 answers · asked by Anonymous

2007-07-12 13:17:40 · 32 answers · asked by Anonymous

Every time I go fill up at the local Arco, the gas always overflows out of the tank when I try to use the pump at full power. It doesn't appear to be blocked when I look inside. Why is this happening and what can I do(besides wait forever)? Its a 1970 Mustang

2007-07-12 13:00:59 · 5 answers · asked by Tim 2

2007-07-12 12:55:27 · 4 answers · asked by maria angelica B 1