Maintenance & Repairs - October 2006

2006-10-21 07:56:31 · 6 answers · asked by Anonymous

2006-10-21 07:53:30 · 21 answers · asked by Rob W 1

I was woundering if a warped rotor would cause a vehicle to shake when driving over 65 MPH. If so would I be able to turn these rotors and make them not do this. Vehicle does have pedal pulsation but not real bad.

2006-10-21 07:52:47 · 12 answers · asked by stealth5033 3

car has 70000 miles on it. started running "rough" an check engine lite came on. i extracted the codes by grounding the computer w/paperclip = misfire in cylinder #3 and #4. any ideas of where to find source of problem? i was raised on muscle cars so hondas are (literally) japanese to me.
thanx in advance.
i can help with 60s'-70s' muscle car questions.

2006-10-21 07:52:23 · 3 answers · asked by evlme2 1

2006-10-21 07:50:33 · 13 answers · asked by Rob W 1

I believe the liquid to be antifreeze. It doesn't drip just fogs out of the openings. every 5 days I have to add water to the external antifreeze tank. approx 1/2 gallon. Thank you

2006-10-21 07:50:09 · 8 answers · asked by naz 1

2006-10-21 07:47:45 · 4 answers · asked by Cheryl S 1

The blinker works 95% of the time but it will just sporatically stop working and start back again. We can't locate the relay to replace it. Any suggestions?

2006-10-21 07:46:03 · 5 answers · asked by Georgia Girl 3

2006-10-21 07:42:36 · 9 answers · asked by Dean 2

pix would be good too...thanks

2006-10-21 07:42:10 · 2 answers · asked by queball33 1

ive been told that it is posible to do it just wonderd if anyone knew this was true and if anyone has done it

2006-10-21 07:40:12 · 25 answers · asked by Dean 2

I don't have the manual that came with it since i bought it second hand but i need to know where exactly the fuel pump relay is because they aren't numbered.

2006-10-21 07:36:48 · 8 answers · asked by Anonymous

i have wired the lights up already apart from the side light which would make them work i would be gratefull if any one out there could help please
cheers

2006-10-21 07:27:19 · 4 answers · asked by goldie03uk 1

My car overheated when the heater core went out. I replaced the cored and cover is on secure and all put back together. System has been burped of air bubbles, but it seems to take a bit longer to warm up than it used to. What could fix this, replacing the 192 degree with a 195 degree thermostat? Do they often get messed up after an engine overheats and not always work properly afterwards? Im thinking it could be stuck open just a bit, which would cause it to take a bit longer to warm up? Recommendations ? thanks

2006-10-21 07:20:56 · 9 answers · asked by mombo323 2

2006-10-21 07:16:27 · 2 answers · asked by juniorbeata 1

It was not attached to the window. It was connected to the ceiling of the car by a screw?? I think.

2006-10-21 06:56:15 · 7 answers · asked by vallygirl24 1

is a special puller required for the slots in the balancer ?

2006-10-21 06:42:42 · 5 answers · asked by suprahattie 1

What brand of oil should I get for my UK registered 2004 Peugeot 206 Diesel? Do the expensive brands make a difference to cheaper ones?

2006-10-21 06:39:55 · 7 answers · asked by cathedralkat 2

2006-10-21 06:32:44 · 3 answers · asked by Anonymous

2006-10-21 06:32:38 · 14 answers · asked by Kimridesaharley 2

I need to check them because my car will not start and I've already changed the battery and starter. I also need to know where to find the solenoid in my car. Thanks for any help possible.

2006-10-21 06:30:05 · 4 answers · asked by Christopher R 1

2006-10-21 06:24:51 · 6 answers · asked by jimauk 2

2006-10-21 06:24:39 · 8 answers · asked by brian m 2

2006-10-21 06:17:35 · 4 answers · asked by Anonymous

2006-10-21 06:07:20 · 6 answers · asked by star t 1

I have a 2000 Sonata, and the Crank Posistioning Sensor went bad. The local shop wants to charge me 416.61 to fix it. I know the engine popped a code so all they had to do was hook up a scanner to it to get the problem. I found the part for 80 bucks, and I just can't imagine it would take long enough to justify that large of a bill. Also the mechanic said he had to tear the whole front of the engine apart. Please Help, because this seems like a rip off!!

2006-10-21 05:46:55 · 6 answers · asked by corey0863 1

Just replaced the fuel pump,fuel filter and fuel relay with all new parts Friday October 20,2006

2006-10-21 05:18:04 · 6 answers · asked by Xavier H 1

I replaced the flex plate on my 1996 ford aerostar awd and six mouths later the flax plate cracked again. any help...

2006-10-21 05:06:58 · 4 answers · asked by Ronda 7

I havea 1987 Buick Lesabre Custom replace the fuel pump,fuel filter,fuel relay when I put the #20 amp fuse fuel pump,injectors in the fuse box and turn the ignition switch the fuse is blown,what can be the problem?

2006-10-21 04:48:18 · 7 answers · asked by Xavier H 1

2006-10-21 04:47:07 · 6 answers · asked by Anonymous