Car Makes - September 2007

I've heard between 9 and 11 psi. is this right?

2007-09-05 18:41:36 · 4 answers · asked by Anonymous in Chevrolet

2007-09-05 18:18:35 · 9 answers · asked by BJ H 1 in Honda

Everything in it to my knowledge is stock. I have been looking into it, it is a V6, and I am looking to get better performance at it, but don't know where to start.

2007-09-05 17:57:32 · 6 answers · asked by Paul L. 2 in Chevrolet

i have an 89 305 tbi camaro .well it ran good until i was told the dissy was bad ,wasn't (fuel pump) well after i ve replaced it this car runs like crap.doesn't want to time right doesnt want to stay running and when it is it has a little backfire out exhaust.

2007-09-05 15:40:02 · 9 answers · asked by Anonymous in Chevrolet

I have a 1984 C-10 Chevy truck 2wd. When I press on the break pedal, it almost goes to the floor before the truck feels like its gonna stop. A couple weeks before the brakes squealed a little bit when Id stop but not now. What is the problem? Does my truck have drum brakes on front and back or disc and drum? Somebody please help me, I need to get it fixed in hurry!

2007-09-05 15:39:23 · 10 answers · asked by joshthebowhunter 1 in Chevrolet

I have a 1986 C/K chevy with a 350 small block. The proble is in the fuel getting to the motor. We changed fuel pumps on both sides in the tanks and the fuel filter any ideas what else it could be?

2007-09-05 15:23:05 · 5 answers · asked by Anonymous in Chevrolet

My divorced w/ children girlfriend has some issues with her newer model Land Rover mostly with squeaky brakes with a bit of shimmy when stopping.. When she called the mechanic, he diagnosed it as an issue with brake replacement an/or/both the rotors as well.
He quoted her a cost of 1,000 to 1,200 to fix it. This seems like more than highway robbery, since new brakes and turning rotors together would cost around $200.00 for a standard car.
His claim is the Land Rovers is a very discriminative SUV. It requires factory parts or it will cause all types of other issues such as warning check engine lights going off and also providing poor road performance. Even if this is true, the price still seems really high. I strongly think that he is taking advantage of her because of her single status.
I would be very APPRECIATIVE to hear from anyone who has knowledge on Rover Repair costs. I will forward your advice on to her.
Thank you for your help!
kygirl3

2007-09-05 14:52:03 · 2 answers · asked by kygirlflgirl 1 in Other - Car Makes

Do they have daytime running lamps?


How do you turn on the fog lamps? Is it a little button opposite the "power source" (AKA cigarette lighter), below the temperature controls?

THANKS SO MUCH!

2007-09-05 14:46:32 · 2 answers · asked by Sage B 4 in Dodge

2007-09-05 14:37:06 · 40 answers · asked by Anonymous in Ford

I have had my Pacifica for a little over a year now, it was bought "pre-owned". The gas mileage was about 22 mpg at the time of purchase, now I am only getting about 20 mpg. Everything has been done as far a regular maintence. I don't know why I seem to be decreasing in gas mileage and I drive a lot so a little decrease makes a difference. I drive the same roads all the time so highway/city shouldn't be making any difference for me. Is there any thing I can do myself without going to the mechanic? Is there anything I need to have my mechanic look for? Thanks for your help!

2007-09-05 13:49:14 · 2 answers · asked by coltqueen 5 in Chrysler

I wanted to get some cool looking rims. First off, what is the difference between rims and wheels. Then, what size are the wheels.

2007-09-05 12:47:32 · 5 answers · asked by Tony C 2 in Dodge

I need a step by step as to what to do once I take the hub nut of please. It is probobly something simple now. I hope!

2007-09-05 12:46:39 · 3 answers · asked by rads92 1 in GMC

I'm thinking brake booster, any other suggestions?

2007-09-05 12:42:30 · 3 answers · asked by Dave L 2 in Mercury

I figure Ive stripped the bolt somehow (after doing numerous oil changes), how do I get the bolt out now. The hex head is still connected, but as stated when I put a wrench or drill on to get it off it rotates but does not tighten or loosen.

2007-09-05 12:31:56 · 6 answers · asked by jtbigz_ga 2 in Dodge

2007-09-05 12:23:41 · 4 answers · asked by A-Will 1 in Mazda

2007-09-05 11:59:58 · 4 answers · asked by eddierock22 1 in GMC

man, Subaru did a great job on designing the 5 door impreza! Looks just like Mazda 3 hatch. what do u think about it?

2007-09-05 11:37:38 · 7 answers · asked by Anonymous in Subaru

where is the fuel filter on 1994 honda accord located

thank you

2007-09-05 10:33:52 · 7 answers · asked by Anonymous in Honda

are they made by the same company

2007-09-05 10:33:24 · 9 answers · asked by trickyricky58 1 in Mercedes-Benz

I just got brand new rims and wheels ( the rims are VOXX and the tires are good years) on my 2007 ford fusion but now it is making noises like a whislte and a clicking does anyone know what i can do to fix this.

i cant think of anything being wrong since i just bought the car brand new 3 months ago

2007-09-05 10:24:44 · 7 answers · asked by Roger 1 in Ford

i bought a new 2006 jeep wrangler and now the tires shakes everytime i go over 40-45 mph. i mean that it shakes so hard and the steering too. its so scary and i don't know what to do since it is my first jeep. i forgot to mention the tires are pretty big if thats the problem? ( i have a 1 year warranty on it too)

2007-09-05 10:21:14 · 12 answers · asked by silltnwild 2 in Jeep

Mechanically, not stylistically. They're both 5 lug patterns.

2007-09-05 10:18:33 · 5 answers · asked by Anonymous in Audi

I have a coolant leak and I can't see a visible leak although I have only looked under the car and hood without moving anything. The car hasn't overheated either.

2007-09-05 09:33:02 · 1 answers · asked by beak41 1 in Mercury

2007-09-05 09:26:18 · 2 answers · asked by Anonymous in Toyota

I am changing the oil in my truck. It had a 5.9 360 v8 Magnum. How many guarts of oil do I put in? Thanks for you help.

2007-09-05 09:24:50 · 11 answers · asked by blakefabian2003 4 in Dodge

Car has been in the shop since last week. They've ordered the bearing according to catalog, and its wrong - so they say the spindle has been changed apparently..however my brother in law says the bearings come with numbers imprinted on them which should make it easy to replace. The garage lady says Hyundai bearings don't come with numbers...anyway, they are down to the last bearing Hyundai makes and we are waiting for that part to come and hoping it is correct....I am wondering if this is just totally nuts or does this sound correct? Shouldn't they have just taken the bearing itself to an auto parts place and matched it up? Why is this so hard? Car was originally put in the shop for a new alternator, by the way.

2007-09-05 09:14:32 · 4 answers · asked by joni38 3 in Hyundai

2007-09-05 09:13:29 · 2 answers · asked by Anonymous in Mitsubishi

for this brand?

2007-09-05 09:11:30 · 3 answers · asked by Anonymous in Fiat

and how well is it doing?!

2007-09-05 08:27:47 · 11 answers · asked by Melissa C 1 in Ford

2007-09-05 08:11:37 · 4 answers · asked by Anonymous in Dodge