Cars & Transportation - 23 June 2007

I dont know what to call it so I am going to try an describe it.I have a 2007 Kawasaki ZZR600 and the thing that holds the coolant fluid, I guess, (its on the left side by the gear shifter) is cracked because I dropped it a few days ago. I need to buy a new one of those things so does anyone know of any online parts store or any store near the DFW area that would have one. preferably an online store.

Any suggestions would be greatly appreciated.
Thank you soooooo much.

2007-06-23 12:28:16 · 3 answers · asked by Me 1 in Motorcycles

I'm wondering if this is available anywhere? I'm hoping that it's availible on an Internet based movie server or on DVD or VHS. It appears to be a low budget 50's movie. Here's a description:
(Actually if anyone can recommend any other good rail movies it would be much appreciated-Thanks)
"Night Freight"
1955-USA-Crime Drama-

PLOT DESCRIPTION-
Forrest Tucker stars in this yeoman Republic actioner. A short-term railroad freight line is threatened with extinction by a swifter trucking service. Keith Larsen is Tucker's business opponent, as well his rival over the affections of the beauteous Barbara Britton. When the train service evinces signs of survival, the truckers start playing dirty. Night Freight was directed by western veteran Jean Yarborough, who proved that his many years in the TV-sitcom world had not diminished his ability to stage action sequences. ~ Hal Erickson, All Movie Guide

2007-06-23 12:22:01 · 2 answers · asked by LanceMiller77 2 in Rail

I took it there and I got it diagnosed by 2 different places and both of them said they don't know what it could be and I'll need a tune up to find the problem ($500), the cars a MITSUBISHI ECLIPSE 1996 Manuel Base Model (NA and Not Turbo Charged). I'm getting like less than 5 miles per gallon now, and the fuel drops rapidly on full throttle and for some odd reason, the fuel seems to rise a little when I stay on low RPMs. Could it possible be the gauge itself is messed up or which part of the fuel system could this be, I wouldn't be surprised from a leak because I get smells of gas here and there, but My guess is that the fuel injectors have a problem.Adding it runs kind of hard in idle and it accelerates a bit slower than it used to on high RPMs. Where could a hard to find leak be? Any suggestions Please!!!

2007-06-23 12:14:05 · 6 answers · asked by Richie 1 in Maintenance & Repairs

2007-06-23 12:09:33 · 3 answers · asked by kkkggggg 1 in Ford

and she didn't know i had it

2007-06-23 11:34:08 · 41 answers · asked by enigmathewisp 1 in Insurance & Registration

2007-06-23 11:30:22 · 14 answers · asked by deray 1 in Motorcycles

I drive a 2000 Chevy S-10, & I personally think this is another "my girlfriend keeps telling me" piece of mis-thunk wisdom...(but I dare not reveal my thinking to her...)

2007-06-23 11:23:43 · 13 answers · asked by Kentucky Dave 6 in Maintenance & Repairs

2007-06-23 11:21:38 · 1 answers · asked by paul c 1 in Other - Cars & Transportation

my ecu light is on ,i have reset it but the errors codes are 1,cam senser now changed 2 pre cat senser ? 3 no 1 plug lead ? i dont think its the pre cat senser just passed a mot,and plug lead no misfire ,it runs a bit lumppy on tick-over when warm any ideas anyone-failure no answers i will have to take it to a bmw dealer

2007-06-23 11:11:57 · 4 answers · asked by BOB D 1 in BMW

I know this information is in the POH and trust me I would consult it before ever doing it. But I'm at home and the POH is in the airplane, and I'm curious and I guess impatienant.

2007-06-23 11:03:25 · 14 answers · asked by Sprangenson 1 in Aircraft

alrighty, my mom has a 07 impala,with the door lock on her key ring. It will not work over half of the time??? she has taken it to the dealership twice.when she did the da** thing worked?????she is afraid they think she is crazy!!lol is any one eles having these problems???
thanks

2007-06-23 10:56:33 · 5 answers · asked by Anonymous in Maintenance & Repairs

my g/f has a 2001 p 206 and recently the h.brake light has started flickering on/off. i've heard tell that this may be a signal that the brakes are going. is this tru??? and if not then what could be the possible cause????

2007-06-23 10:54:40 · 8 answers · asked by jmcgrath4370 2 in Maintenance & Repairs

The compressor doesnt seem to be kicking in at all Could it be just the breaker perhaps? Any help is appreciated. Thanks , Chef

2007-06-23 10:52:54 · 5 answers · asked by chefmeister01 2 in Maintenance & Repairs

How do I rebuild myy 350 LT1 to a 383 LT1? Are there special kits to this project? It's a 1996 350 LT1 with about 95,000 miles on it. I want to put the 383 LT1 in my stock 1996 Z28 Camaro. I will be useing this car in the hot temps. of Tucson,AZ. Do I have to wory about it over heating? I want the car to be street-strip. I will be driveing the car back and forth to work and I would like to take the car to the srtips about once a mouth. What is the est. gas mi. and HP of a 383 LT1? Do you think an 1996 Z28 Camaro with a 383 LT1 would beat the new ford, cobras?

2007-06-23 10:39:16 · 7 answers · asked by Scott G 1 in Chevrolet

I checked the sensors, all fine, but, car when in park is still idling 3000rpm. Then,when I took it for a spin, going about 45mph, with barely touching the gas, it still was idling high....any help would be great...thanks

2007-06-23 10:18:41 · 2 answers · asked by ccj 1 in Maintenance & Repairs

The only numbers that I can find on this bike are L5-U10862. If anybody can help me I would appreciate it. Thanks

2007-06-23 10:09:47 · 4 answers · asked by Robert H 1 in Motorcycles

i live in u.k so what age do u have to be. to drive a car or start driving and wat age for a on road quard

2007-06-23 10:01:26 · 4 answers · asked by Anonymous in Motorcycles

I had the entire exhaust system replaced by a mechanic in CO which I have gone to multiple times and always been extremely satisfied with their work. Because of this, I trusted them. They knew that I was leaving on a 4,000 mile road trip the next morning so everything had to be perfect. Before I even left my house the next day I noticed that the exhaust was hanging unusually low, but I did not have time to call in to the mechanic to ask about it, and since I trusted their work I assumed it would be ok. Not long after driving it began scraping the ground every time i drove over even the slightest bump or uphill. It was about 2 inches off the ground but I did not have the money nor time to stop to have it looked at before I reached CA. I went to a shop in CA and they noted numerous problems with the way the exhaust was installed - it was just plain wrong, missing screws, bent backwards, etc. The way it was installed destroyed my coverter. had to spend another $2000 to get it fixed

2007-06-23 10:00:53 · 7 answers · asked by eternicide 2 in Maintenance & Repairs

I am looking for great performance upgrades for a 2001 Nissan Sentra GXE. This is my first car and I dont want to spend too much, but I am willing to spend some. Hopefully there are some cool parts, thanks

2007-06-23 09:47:52 · 9 answers · asked by Vinnie Z 2 in Nissan

which one will protect my skin better? Which one looks better on a white car?

2007-06-23 09:46:15 · 2 answers · asked by rick d 4 in Maintenance & Repairs

Got a dodge 1996 Cargo Van - fix the overheat once before, new pump, new hoses...etc. Still the mechanic does not know why the car runs hotter in frwy than the streets, esp going uphill with or without cargo. So confusing!!!

2007-06-23 09:45:19 · 6 answers · asked by chap 1 in Maintenance & Repairs

my brakes have been squealing but I can see the pad and looks like there is plenty of pad there. But I may be mistaken. I cant afford to go to the mechanic till a few days. I drive an explorer if that helps any.

can you tell if the roders are messed up without having to go to a mechanic?

2007-06-23 09:31:03 · 9 answers · asked by steph 2 in Maintenance & Repairs

2007-06-23 09:26:48 · 3 answers · asked by Tyler Z 2 in Boats & Boating

2007-06-23 09:21:59 · 14 answers · asked by adianez v 1 in Nissan

the area is about 4 inches, and I would like to go to Walmart or an auto parts store to buy the items, please give me the name and a good description of what I will need, plus, I need step by step instructions how to remove the rust, something simple please...Thanks !

2007-06-23 09:16:16 · 5 answers · asked by 2teens2todds 1 in Maintenance & Repairs

I'd like to know why there is rear wheel drive in more powerful cras. I know it's because they have the power to do it. But why even have such a things when front wheel drive works fine?

2007-06-23 09:12:53 · 6 answers · asked by NikeGolfSponsor 1 in Other - Cars & Transportation

The key switch at the tailgate has not worked since I have owned the Blazer. The interior switch has finally stopped working. The motor for the window bumps but the glass does not move. I have tried to remove the top around the glass, but there seems to be something besides the removable screws that hold the top to the tailgate.

2007-06-23 09:12:04 · 1 answers · asked by jag2791 1 in Chevrolet

In my ignorance I thought I could just top off the a/c with R134, not realizing it was and R-12 system (yes I know, stupid). So in the process it seems as though I drained all the R-12 out but of course none of the R134 went in. Needless to say it no longer worked after that. I then did some research on converting the system myself, and bought a kit at Wal-Mart. I didn't think I'd need to take it to a shop to have any R-12 drained, so I just tried it. Another mistake I made is that I didn't take out the valve stem on the low end when I was trying to pump the R134 in. So I took it out and screwed on the 134 adaptor again, tried pumpin some more 134, to no avail.

I'm hoping this makes sense. Any ideas?

2007-06-23 08:53:46 · 3 answers · asked by Jaynick 1 in Maintenance & Repairs

2007-06-23 08:52:18 · 4 answers · asked by Janso100 1 in Maintenance & Repairs

lost my repair manual...so, any detail pics would be helpful also. Thanks in advance....

2007-06-23 08:50:06 · 1 answers · asked by ccj 1 in Mitsubishi