Maintenance & Repairs - November 2006

2006-11-07 20:20:46 · 11 answers · asked by Anonymous

2006-11-07 20:18:22 · 8 answers · asked by smurftb72 1

If was fixing the nose piece on a pair of glasses and the glue got on the lense...now I can't take it off!!! I have tried soaking in warm water and soap, I have also used nail polish remover.

2006-11-07 19:36:48 · 8 answers · asked by Anonymous

How can i fix it, and how much does it cost?

2006-11-07 18:20:20 · 7 answers · asked by mochalttachill 1

with a minium diameter of?

2006-11-07 17:29:09 · 3 answers · asked by Anonymous

2006-11-07 17:26:52 · 2 answers · asked by Anonymous

2006-11-07 17:25:12 · 4 answers · asked by Anonymous

2006-11-07 15:16:13 · 7 answers · asked by brokenbeauty 1

2006-11-07 14:39:25 · 6 answers · asked by hill2331 1

home air conditioner making

2006-11-07 14:28:29 · 2 answers · asked by vladD 1

2006-11-07 14:25:33 · 4 answers · asked by dave f 1

Pouring 20+yds. friday and need some tips so I know if the guy I hired is going to get the finish I want. Any would be helpfull.
Thanks

2006-11-07 14:24:11 · 2 answers · asked by Old man wrench 4

My friend has just contacted me her loo is blocked from where one of her kids used a lill too much loo paper lol I told her to plunge and she was like cant cos the number 2's is still sitting there ...any ideas?

2006-11-07 13:40:23 · 11 answers · asked by blue_eyed_woman_of_3 3

I am trying to replace a leaky valve stem in my shower fixtures. It is a two handle shower. I am trying to loosen the stem by turning it in the ON position but I can't get it to move past a certain point. Does that mean I am weak or that I not supposed to pull it past that point. Thanks,

2006-11-07 12:50:56 · 4 answers · asked by artlover_65 1

My first attempt at using a 66 block was a complete failure. I used an impact punchdown tool with a cutting tip. The clips do not seem to hold the punchdown wires very well. Did I just get a cheap block? The gap that is intended to hold the wire seems to have spread after punching it down. Are you supposed to be able to reuse these connections? Are they only good for one punch?

2006-11-07 11:59:04 · 3 answers · asked by Tim K 1

I've had an electrcian to rewire my house. All the switches keep blowing. What can i do?

2006-11-07 11:06:51 · 13 answers · asked by Anonymous

i have a repair shop and was just wondering if i burn firewood in the shop, will it cause me any harm such as some sort of cancer and the like.

2006-11-07 11:06:19 · 5 answers · asked by maxpowerrys 1

2006-11-07 11:04:48 · 19 answers · asked by rick_mason47807 1

the highway done some dynamiteing and now the block in the basement leaks when it rains alot

2006-11-07 10:25:55 · 4 answers · asked by ??????? 1

I've heard with a good finish you can prevent dents. Is there a particular finish that can help more than others?

I don't know what kind of softwood, just that it is softwood.

2006-11-07 10:24:36 · 2 answers · asked by WJ 7

2006-11-07 10:06:00 · 2 answers · asked by Anonymous

2006-11-07 09:38:55 · 4 answers · asked by phil_mac36 2

i have an MTD 32cc handheld leafblower. i have used it for about one season, and bought it brand new. however that cylinder head continuously comes loose. i have to completely take apart the outer shell just to tighten up two bolts. i am also using heavy-duty locktite on these bolts but they manage to come loose after about 1 hour of use. how can i fix this?

2006-11-07 09:37:56 · 5 answers · asked by Anonymous

I'm trying to change the colors of pure play sand with-out having to spend alot of money for christmas I have planned. I can't afford all the different colors out in the stores,when i have the ingredients here.I just need to know if it work before I picked up the heavy bag of sand. Thank you!!

2006-11-07 09:22:15 · 2 answers · asked by Anonymous

I am trying to take apart a plastic pump housing on an electric motor. I was able to remove all but one phillips head screw. the screw was rusted and stripped when I tried to remove it. I have tried to tap it with no luck and remove it with an easy-out drill bit which just stripped it further. I need to salvage the plastic housing so I can not damage it removing the last screw. Note: the srew it going onto a metal female recepter thats glued into the platic housing. Any Thoughts would be appreciated THANK YOU

2006-11-07 08:14:08 · 11 answers · asked by Dennis M 1

2006-11-07 08:01:08 · 9 answers · asked by Anonymous

I have 1/2 HP screw drive garage door opener. I like this model because it has a SAFE-T beam feature that stops the door if a child is under the door while the opener is closing down.

Now, the problem is that when I use the control by the wall, I can close it but when I use the remote control, I had to press it so many times before the door closes, if at all. 95% of the time, the door just starts to close and then springs back up, even if there is no object obstructing the laser beam at the bottom. I have cleaned the glass of the "eye", replaced the battery for the control with a new, fresh one, replaced the coil springs and still no luck. I am resigned to getting out of my truck each time and use the wall control and lower the door to a point where I can I can slip right thru and use the remote to close the door completely. In short, I have to use both the wall control and remote control to open and close my garage door.

Any suggestions? Help!

2006-11-07 07:30:21 · 4 answers · asked by Aldo 5

I opened my oven door before it locked therefore, the lock is engaged and my door will not close. I cannot put it through the cleaning cycle to disengage the lock or heat it for cooking because the door is ajar and it will not heat with the door open. Please help.

2006-11-07 07:23:49 · 4 answers · asked by tnyaya3 1

Why? there are 3 buttons inside the door but I can't find the instructions. Does anyone know what the buttons are for? (Its a Bosch economic_)

2006-11-07 07:15:23 · 10 answers · asked by andipandi 3

Not at the water main, ideas where it might be. no cornball answers please.

2006-11-07 07:11:31 · 5 answers · asked by wdr31 3