Other - Hardware - November 2007

Last time I unplugged my Power Supply from my PC for repaor, now I have no idea on where each plug goes, somebody pls help

2007-11-10 21:09:44 · 6 answers · asked by Anonymous

i saw in the online shop that 1Gb 400 MHz DDR is better than 1 Gb 800 MHz DDR2.

2007-11-10 19:12:55 · 9 answers · asked by Zex 2

i had just put my 224 mb ram, and after doing so, my computer run slow and the computer says that my ram is only 96 mb.. how this thing happened?.. some friends told me to reboot it but i dont know to reboot.. could you guy help me with this?

2007-11-10 18:04:26 · 8 answers · asked by Kris Rose 1

i have a computer with a accelerated graphics port agp 4x slot and i found a video card with agp 8x slot will that work or is there a difference

2007-11-10 12:26:53 · 4 answers · asked by Anonymous

2007-11-10 09:41:07 · 4 answers · asked by aGiLe17 1

ok heres what is happening. i need a god to help with this. im trying to install tiger on my 10.3.9 mac. i have the offical install disc. my mac tech spec is

Dual 1.42 GHz, PowerPc G4 , 120GB HD (23GB LEFT) 1GB DDR SDRAM.

i have used loads of programs to try and repair the hd so tiger can install

this is the error log when i try and install.


Nov 9 14:20:47 localhost : Volume check failed.

Nov 9 14:20:47 localhost : Verify/Repair failed with error -9972 (The underlying task reported failure on exit)
Nov 9 14:20:47 localhost : Mounting Disk

does anyone know any more tools i can use? any ideas. plz help

2007-11-10 08:23:38 · 4 answers · asked by Emma 3

are computer cpu made of gold can any 1 tell me
claire

2007-11-10 05:43:29 · 9 answers · asked by CLAIRE W 1

2007-11-10 05:35:51 · 3 answers · asked by cge1222 1

I want to buy pen or flash drives and I need to find out if drive has been modifed?
If the drive has been modfied what are the consequences?

2007-11-10 04:35:09 · 1 answers · asked by nokunna 2

2007-11-10 03:34:06 · 2 answers · asked by Ilovemy3kids 2

2007-11-10 03:21:06 · 2 answers · asked by Anonymous

in computers we defined a special voltage as "1", and a special voltage as "0" ... why we use 0 and 1 in computers ?! why we don`t define some other voltages as other numbers and use them in computers?!--- excuse me if my question had grammatical problems!---

2007-11-10 03:02:49 · 22 answers · asked by Kamikazi 1

Ok, im trying to put my computer together but for some reason my computer wont turn on. Now i think it may be the harddrive. There are 3 things that can be pluged into it, one for the motherboard which i have put in, two for what seems to be the power supply, and three some other slot of a cable. It looks like 2 rows with 4 little pins sticking out( like this :::: ). Not sure if i need to use it or not and when i ordered my computer, no book came with the harddrive.......... well if anyone can help me out to what it is and whats it for.

2007-11-10 01:29:43 · 5 answers · asked by Slapjack 3

I have had months of trouble trying to get my Striped RAID motherboard working again after the capacitors blew. I finally got the problem figured out (I thought) and just got the motherboard back from a guy who replaced all large caps.

After reinstalling my motherboard it wouldn't even flicker on. While reviewing pics I was going to post to see if anything was my fault, I found my RAM to be seemingly missing a piece. http://img31353.pictiger.com/images/13030823/ Is this the cause of my computer not showing any signs of power-on or is there more to blame. (I'm tired of spending money on this in order to recover my hard drives' contents.) I can provide more pics if needed.

Thanks for any help!

-Matt

2007-11-09 17:41:19 · 4 answers · asked by mattE 2

My computer doesn't let me get past the blue screen. What do i do now?

2007-11-09 15:56:41 · 7 answers · asked by Anonymous

I have a 600watt power supply , say if i leave my computer on the whole night will it be using the whole 600watts?

2007-11-09 14:51:29 · 5 answers · asked by air_mj11 1

i bought a new keyboard and the cord has a rectangular usb port. the hole in my cpu that is for the keyboard is a round circle. and i dont think my cpu or monitor has any openings for a usb port. what can i do? is there something i can buy?

2007-11-09 14:30:07 · 5 answers · asked by :) 2

will a crossfire work on sli motherboard

2007-11-09 14:04:12 · 4 answers · asked by Anonymous

mines does

2007-11-09 13:32:37 · 8 answers · asked by Anonymous

I want to build a computer for family use

Can anyone recommend the best value parts to use? & what I should install - for starters I was thinking of the items listed below but would welcome suggestions. The computer will need to last 3-4 years.

Intel Core 2 Duo E6600 CPU
Motherboard with Intel G965 Chipset
2GB RAM
Graphics card so that the kids can play games
250GB hard drive
DVD burner
20 inch screen
flywire
keyboard & mouse
5 USB points
Modem

2007-11-09 13:02:12 · 3 answers · asked by 1mango 3

hi i am looking for card that sutes with hardcore gaming .....here is my system Asus p5w dh mother broad crossfire ready ...2Gb ram crucial ....intel e6420 core 2 due ...and 750Watts power supply .....i have good cooling system .......i am ready to spedn about £200 ......i saw Asus 2900XT card is it any good ? as long as my motherboard supports cross fire does it work better with ATi rather tha Nvidia ...? Please tell me good card ? for this price i know nvidia 8800GTX ultra thing are the fats and best cost way too much for me so ...what are the other options i have rather than choosing those expensive Ultra cards ?

2007-11-09 09:47:16 · 5 answers · asked by randike2007 1

2007-11-09 09:04:18 · 6 answers · asked by Richard R 1

reinstall windows all over again but, by accident I installed windows on the wrong drive by accident. Drive H has too little space, so now windows can't update properly cause of that, Is there a way I can put windows on drive C without going through the whole process of reformatting again?

Thanks

2007-11-09 05:48:24 · 7 answers · asked by Lilly B 2

Bought an mp3 philips player today, conected to do sync, it looked fine, then i ''upgraded firmware'' as in was directed in the setup leaflet, the mp3 wrote ''upgrading firmware'' then my setup said i unplug it from the pc to complete, i did that, and then nothing, just blank and dead, the device is no longer recognised by windows

i tried to delete/reinstall usb drivers, reboot, nothing..

i connected the cable to another usb device, a card reader, and that works fine!

where is the problem? is it in windows or in the device, it doesnt appear to be in the cable:/

2007-11-09 05:29:32 · 2 answers · asked by Anonymous

2007-11-09 04:14:35 · 5 answers · asked by Burak 2

hi there
i just upgraded my pc with ram form 1gb to 2 gb
i had 2rams for 512MB(ddr)
when i aded this new 1GB ram my windows not starting up..
i see bios screen it shows me that i have 2048 RAM=OK
then i see windows logo and loading bar it loads windows. but after that i dont see n e thing instead of welcome screen i see black sreen and its not starting up and doing nothing at all.
now ram they are the same only diference is the one i had was 512 and the new one is 1gig..
i have cheked all the websites andive done lots of tests if my machine can support more then 1 gig of rams test showed me that my machine can support up to 4 gig..
n e ideas?
mey be i have to reinstall windows to make it work???
why or wot is wrong with it?
thx

2007-11-09 02:07:03 · 8 answers · asked by No_Ki 2

It's a Asus p5vd2-mx. I was thinking about installing two sticks with 1G each. Thanks for the help.

2007-11-08 23:25:44 · 7 answers · asked by sergio o 1

hey i recently got a router of my m8 it is a Hewlett Pakcard j3128a and i cant find a driver for it to downlaod because it didnt have a cd ...can someone plz send me a link..for it..
ill make 2 more questions and give u 10 points please

2007-11-08 21:11:30 · 3 answers · asked by Anonymous

Is it worth paying around $25 USD for this card , just to upgrade from my crappy geforce mx 440 . Will this card let me play today's games at low settings ? I can't afford anything much more ezpensive as id have to buy a new motherboard . Cheers

2007-11-08 20:55:13 · 7 answers · asked by Anonymous

How strong has the magnet got to be? How is the strength measured?

2007-11-08 20:52:45 · 6 answers · asked by Anonymous