2007-11-09 09:04:18 · 6 answers · asked by Richard R 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
Use a crossover cable to connect between the NICs (Network Interface Controller or Network Card) in each computer.
2007-11-09 09:13:31 · answer #1 · answered by Mars Hill 5 · 0⤊ 0⤋
its very simple
there are 2 ways
1) connect them by an ethernet (lan) wire by putting one end in 1 pc's lan card and the other end in the other pc, altho the connectors should be arranged in cross sequence
2) same method but u use a lan switch and no need for the cross thing.
2007-11-09 09:13:47 · answer #2 · answered by Anonymous · 0⤊ 0⤋
you will get a instant DSL device or you will desire to purchase a 2d DSL modem. in case you have 2 DSL modems, merely one can be related to the telephone line and grew to become on at a time. i offered a 2d modem, precisely a similar variety and variety, on eBay. in case you in many circumstances change between desktops, it is slightly greater costly yet a lot greater handy to bypass instant. The modem has a 6" stubby antenna and each and each laptop has a receiver antenna.
2016-12-16 03:45:06 · answer #3 · answered by ? 4 · 0⤊ 0⤋
ethernet cable through a router if ur computers are hooked up that way should already be connected but im guessing not so you need a standard router
2007-11-09 09:12:39 · answer #4 · answered by halo2master24 2 · 0⤊ 0⤋
the easiest way is with a router or hub. If you want them to share an internet connection then you'll need a router.
http://en.wikipedia.org/wiki/Ethernet_hub
2007-11-09 09:12:40 · answer #5 · answered by CoachT 7 · 0⤊ 0⤋
just buy a network card for both
if you just want to transfer data you can get a usb cable with two male conectors
2007-11-09 09:11:37 · answer #6 · answered by pj 3 · 0⤊ 0⤋