English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Last time I unplugged my Power Supply from my PC for repaor, now I have no idea on where each plug goes, somebody pls help

2007-11-10 21:09:44 · 6 answers · asked by Anonymous in Computers & Internet Hardware Other - Hardware

6 answers

go to

http://www.fonerbooks.com/r_power.htm


havok

2007-11-10 21:33:03 · answer #1 · answered by Anonymous · 1 0

Get the motherboard manual it will tell you where they go. The largest one with 20 (or more) connectors goes onto the motherboard (matching socket). You may also have a square 4 pin plug which goes near the CPU (on Pentium 4's). Each hard drive or CD/dvd will also have a molex plug (white plug with four connectors in a row with red/yellow/black wires). Don't forget the floppy drive also has a smaller connector. Be careful with this one - unlike the hard disk cables, the floppy can be connected upside down and fry the drive.

2007-11-11 05:29:05 · answer #2 · answered by Anonymous · 0 0

These guys are wrong. If it's an ATX motherboard you can plug the two connectors in wrong. You need to plug them in so the black wires on the end of each connector are in the middle.

2007-11-11 08:45:51 · answer #3 · answered by Nomadd 7 · 0 0

The biggest connector goes on the mother board.

4 pin connetors flat are for CD-ROMS & Hard Drivers

very tiny 3 pen goes for the floppy disk.


OMG YOUR DONE!

2007-11-14 23:43:32 · answer #4 · answered by o0_binary_0o 1 · 0 0

the connections will only fit one space keep looking until you get there

2007-11-11 05:13:49 · answer #5 · answered by whatanidname 5 · 0 0

seriously.. wherver it fits.. it works... thats how PCs are designed

2007-11-11 05:17:13 · answer #6 · answered by Anonymous · 0 0

fedest.com, questions and answers