Other - Hardware - May 2007

also what outlet do i plug my computer and monitor into the standard surge protected outlets or the transformer surge protected outlets? Thanks

2007-05-09 12:59:08 · 2 answers · asked by lrgross_99 1

does it help the site load faster if you hold the spacebar down?

2007-05-09 12:55:26 · 7 answers · asked by Manny 1

Just wondering, what is the difference between
2.0GB DDR2 Non-ECC SDRAM, 667MHz, (2DIMM)
and
2GB DDR2 Non-ECC SDRAM,800MHz, (2 DIMM) ?
Also, is it a HUGE difference or if I were to go with the lower one [which is also the least expensive] it wouldn't make all that much of a difference?

2007-05-09 12:43:11 · 4 answers · asked by Anonymousssss 1

2007-05-09 11:42:35 · 9 answers · asked by girljak 3

I am trying to replace my GeForce Ti200 with the 6200. The only problem is that the card wont fit into the slot. What do i have to buy to make it fit? If you need pics, you can email me at offroadn_redneck@yahoo.com and ill send you some explaining what i mean.

2007-05-09 11:14:58 · 3 answers · asked by offroadn_redneck 2

I'm trying to down load a file I created with some info to a memory stick from my computer called it "New Folder" & I get an error message I'm not understanding what to do about it please help The msg says
"Can't create or replace New Folder: The directory or file can't be created

2007-05-09 11:05:23 · 3 answers · asked by Sam 3

Yes I have a Dell Dimension 5100 and I am having a few problems with my hardware on it. When I go to System, and then to Hardware Manager, i get these on the screen (under Other Devices): (Question Mark with ! on it):

SM Bus Controller
Video Controller
Video Controller (VGA Compatible)


if there is any drivers need could you please tell me where to exactly find them.

Thanks

2007-05-09 09:06:42 · 5 answers · asked by cabman1990 2

ok my computer screen is like a greenish color. i tried to change the color back (RESARTING IT, FIXING THE BRIGHTNESS, fixed the wire ) can u tell me how to change it back. also if this helps i moved it from one place 2 another

2007-05-09 08:46:20 · 6 answers · asked by Anonymous

I have a Pentium 4 3.2GHz processor on my computer but it takes FOREVER to start up. How do I find out the Bus size and increase it? Thanks in advance.

2007-05-09 08:06:30 · 10 answers · asked by coolrichard2 3

use PC (Lenovo, 5 months old) 2 days ago and all was fine, never install/remove software/hardware, tried holding "INS" key when turning on but no use - keybaord is not power-up

2007-05-09 03:35:11 · 4 answers · asked by foongyk 1

I play World of Warcraft and use ventrilo at the same time. My computer is connected to a router.

I just bought a new eMachines T5212 (Processor: Intel Pentium D 805 2.66 GHz, RAM: 1 GB 533 MHz DIMM 240-pin DDR II SDRAM, Video: Nvidia 7600 GS, Hard drive: 200 GB 7200 rpm, Network Adapter: Integrated ) last year and around the same time, I needed to reset my router (bought in 98).

Since then, my computer has been making WoW lag up and ventrilo will disconnect every now and then. I don't hear anyone talking for a little while and then I will hit my "push to talk" key and it will disconnect me.

I have tried switching out my network card in my PC thinking it may have been faulty, but it still does the same thing.

I never had this problem with my old computer so I'm confused as to what the problem is. I'm considering buying a new router, but I want opinions first.

2007-05-09 01:37:13 · 3 answers · asked by Cemetery Gurl 1

2007-05-09 00:35:11 · 8 answers · asked by Eman A 1

i just bought a Western Digital 160GB SATA hard drive here in the United States.. i am aware that the voltage here in the US is 110.. will it work when i get back to the philippines where the voltage is 220? ...i mean, does it even make a difference? they dont make "special-only-for" 110v / 220v HD's do they?

2007-05-08 22:59:37 · 3 answers · asked by mic 2

how can i know my pc support AGP graphic card or pci express,here is my pc specification
pentium4, 2.4Ghz
504mb RAM
display adapter is :intel 82845G graphic controler
i bought my pc 4years ago
any more info do u need to tell me which one
and tell me the best graphic card that can i buy it.

MY SYSTEM MODEL IS: D845GBVZ
SYSTEM TYPE :X86-BASED PC
MANUFACTURE : INTEL
PROCESSOR :X86FAMILY 15MODEL 2STEPPING 5GENUINEINTEL2.4GHZ

2007-05-08 22:33:52 · 2 answers · asked by vipboy_19 1

I got IBM 8189-7CG
and it said it support DDR1 333Hz

it easly to find DDR1 400Hz,

so my question can it be upgraded using DDR1 400Hz (even though it will run in 333Hz)

thanks
Natanel

2007-05-08 21:34:29 · 1 answers · asked by Anonymous

it have 256 MB of Ram

2007-05-08 19:54:13 · 3 answers · asked by Anonymous

2007-05-08 19:22:47 · 4 answers · asked by Anonymous

Well, I am gonna buy a new PC this week.
The config is : p4 3.0 ghz with HT, Intel 945 mboard, 1 gb DDR 2 ram, sony DVD writer, samsung 260 gb SATA.

Can u ppl suggest me in getting a better config by changing it to diff brand and model being almost similar in budget.
Thanks

2007-05-08 18:44:24 · 3 answers · asked by sammy 1

2007-05-08 18:38:08 · 4 answers · asked by doli j 1

ok...new motherboard (2nd one, thought 1st one was bad), new processor, ram, the whole shabang. built. went together fine no problems. whenever i turn it on, the power comes on for a plit second, and then dies. like i said, this is the second moatherboard. so, i take everything out of the case and re assembly on the table. i put the processor and ram in turned on...ran fine. then the video card...turn on, ran fine. then, the moniter......stoped working and started doing the same thing over again.... what is it...????? my brain hurts.

2007-05-08 17:03:48 · 10 answers · asked by darksideofyourmindseye 1

in bios i enable L2 cache but after booting it restarts and goes black. If i disable L2 cache my pc works but it's so slow I can't do much with it. So , can somebody help me please?

2007-05-08 15:34:00 · 3 answers · asked by Davetheman 3

When you are going to overclock both your CPU and memory, do you want to do these separately? Like, you want to first work on the CPU by upping it little by little and then work on the RAM or can you do both of them at once? Also, how long should you leave a setup or test a setup, before going back in and overclocking some more? A few days? A few weeks?

2007-05-08 15:08:46 · 6 answers · asked by magicka 1

Well I'm thinking about getting Elder Scrolls 3: Morrowind (which is beside the point) but it says the supported video cards are: ATI Radeon 8500, ATI Radeon 7500, and ATI Radeon 7200. But also says anything faster than 7500 will work... Now im wondering if an ATI Radeon 9250 is faster than that..? can someone help?

2007-05-08 14:10:52 · 4 answers · asked by general_matt_610 2

If I get the ASUS Striker Extreme nForce 680i, will it make a difference in my games rather than me getting the EVGA nForce 680i. EVGA is $190 cheaper.

2007-05-08 13:48:10 · 3 answers · asked by Anonymous

I want to get a graphics card, but PCI is very outdated, and all the new graphics cards only use AGP or PCIe, so I was wondering if I could get a PCIe graphics card and put it in my PCI interfaced computer.

2007-05-08 13:11:04 · 11 answers · asked by CrazyZ 1

2007-05-08 12:37:21 · 2 answers · asked by Boo 1

2007-05-08 12:24:22 · 12 answers · asked by Anonymous

2007-05-08 12:12:43 · 5 answers · asked by Michelle 1

I recently bought a new computer and it has.....Vista..... I try to play my games but they are kind of choppy and the same games on my 3-4 year old computer play just fine. I just wanted to know if it was vista or is it that my old graphics card is better than my new one. The old card is the AMD Radeon 9500PRO and the card on my new computer is a Nvidia GEforce 6150SE. If my old card is better than I will hope it works and vista and just swap the cards.

2007-05-08 12:11:14 · 2 answers · asked by Anonymous

i have tried data discs as well as audio discs but it will not load up because it cannot read them. it works fine on playback with any type of recorded discs

2007-05-08 09:51:54 · 7 answers · asked by cherry-drop 1