Other - Hardware - March 2007

If I plug up my drive and look at some images then unplug my drive is there any way for someone to come behind me and see the same images I saw without copying them to the computer. I don't want them to be able to.

2007-03-17 04:52:31 · 4 answers · asked by quickgun 3

I already did alt+prt scrn. It doesn't work

2007-03-17 04:13:18 · 1 answers · asked by golferatgreenpond 2

i wanted to get a higher quality graphics card for my PC but i only have PCI slots on my motherboard. Is it possible to change the PCI slots into PCI express slots so i can link up a better graphics card?????

Help would be very appreciated

2007-03-17 04:00:51 · 4 answers · asked by Da JuJu MoNsTa! 2

I have just replaced the mother board and all in ternal components, like the hard disk After turning on the tower it will now turn itself back off. What is the problem?

Amd duron-1.5 Ghz
Maxtor Diamond Max-30.5 GB
Aopen AK73 Pro (A)
Nvidia Geforce 4 450
Soundblaster 24bit LIVE!.

2007-03-17 03:16:54 · 8 answers · asked by ? 1

Put basically, I'm clumsy. I accidentally spilled some milk on my Verbatim Jump Drive the other day and I'm wondering if I'm facing any risk because of it.

2007-03-17 02:27:32 · 3 answers · asked by Benjamin O 2

Hi to all,

I have a Foxconn mobo (661FX4MR-ES) info available at:

http://www.foxconnchannel.com/product/motherboard_detail.aspx?ID=en-us0000111

running Windows XP SP2. It refuses to detect my Sparkle GeForce 7600 GS AGP Card. Info:

http://www.sparkle.com.tw/News/news_7600GS_AGP/news_7600GS_pa_AGP_E.html

I have the latest mobo drivers and nVidia drivers.

I've Googled for two days now and I'm at wits end as what to do.

2007-03-17 02:22:13 · 4 answers · asked by Mac P 2

2007-03-17 02:09:26 · 4 answers · asked by Clinton A 1

Hi,
I want buy a notebook Hp pavillion, on the advertising it's writte about the graphic cards up to 287 MB, it's mean i can upgrade it to 287 MB, how to do? Or graphic card s have already 287 MB?
Is it better than a graphic cards with 256 MB? Thx 4 your advice !

2007-03-17 02:07:14 · 2 answers · asked by fredo f 1

I accidently stepped on my bf's headset and I want to replace it with one for under $20. Any suggestions?

2007-03-17 01:27:41 · 4 answers · asked by Noneyabusiness 4

my customer having following config where he find problem after we add sata hard disk in that

101 ggc intel mb
pentium d 4 processor
GeForce 6500 PCI-E, 256MB
Prime source tecnologies en400ab server smps (i upgrade from zebronics to prime source)
80gb seagate barcuda hdd
160 sata hdd segate where the problem starts after install dis
usb mouse
usb beetel dsl modem
creative 3d card
2 cabinet fan
1 usb web cam
MM Key board
1 asus cd writter
1 sony dvd writter

after i upgraded sata hdd my pc faces always power problem means when i add the sata hdd i get burn then i replaced twice
so i upgrade my power from zebronics to prime source en400ab server smps which costed 1800/- rs even prime source power supply itself got problem
what i want to do ???????????? pls help

ever i upgrade powerful server smps still problem is there


sdavidpaul@yahoo.com

2007-03-17 01:25:00 · 2 answers · asked by David P 3

Every time i try to plug a modem into the usb port i get "new hardware" bleep then the one you get when you take a usb cable out.

Please help its doing my head in now i paid like £800 for this computer and i cant get on the bloody internet.

TIA

Jig

2007-03-17 01:00:41 · 9 answers · asked by Jiggy_O 2

2007-03-17 00:16:37 · 2 answers · asked by ARASH 1

I have done all the defrag,,, disk clean, virus check, pretty much all the simple, and novice level checks, But my system still is running slower than usuall. any tips or freeware to help this?

2007-03-17 00:02:21 · 8 answers · asked by SillyBilly 1

is it possible to use some of your hard drive as extra ram because i want to play need for speed carbon on my pc i meet all the requrements exept for the ram is there a way to use my hard drive?

2007-03-17 00:00:07 · 5 answers · asked by Anonymous

My intentions were good, however, I'm unsure on the outcome. While doing a few upgrades, including Pentium III (Via motherboard) to a Sony VIO motherboard with the mini-chip processor, I noticed a few 'ugly' area's and tried to correct, even though the system was running well with the new additions. I methodically removed everything from the tower, leaving only a shell, sides, front(without electrical wiring) and the little brass feet...screw things that the motherboard is secured with in the cabinet. Everything was scrubbed to remove dirt and oil or grease and I sanded any rust areas. then allow to dry. Afterwards, and using an expensive spray paint, I covered all surfaces as directed by the manufacturer. The rest should have been a breeze, and it was, except turning the computer "ON." The CPU fan simply sputtered briefly and stopped and the system hasn't booted in the 12 hours since.Has the paint interrupted the grounding process or does it simply hate the new color? be nice...

2007-03-16 23:53:59 · 2 answers · asked by Attaboyslim 4

Are GeForce 7 series compatible with DirectX 10(ESP.7600GT)?

2007-03-16 23:23:03 · 1 answers · asked by pedram 1

I tried everything from virus scanning, to cleaning out the registry, and defragging. I even scanned all the drives for errors, and there is absolutely no difference whatsoever. I can't do a reformat unless I buy a disk because my computer didn't come with a Windows XP disc, and it's very expensive, so I don't want to go that route unless I have to, but I'd much rather not. I hope someone out there can help me. I was hit with a virus of some kind, but now my computer is completely clean. I just don't know why it's running so slow, and it starts up so slowly. It effects everything from the internet speed to the overall speed of the computer, and it's very annoying. I even installed more RAM a few months ago, and the computer has over 600 MB of RAM. I even added an additional drive for storage. It was fast at first, but lately it's been going very slow. Any help would be very much appreciated thank you!

2007-03-16 23:18:54 · 4 answers · asked by jurassicboy16 1

I got this when i tried to defrag: Disk defragmenter has detected that chkdsk is scheduled to run on the vol. (C) Please run chkdsk/f.
What will i do now?

2007-03-16 22:40:02 · 4 answers · asked by BABES P 1

2007-03-16 22:25:02 · 8 answers · asked by kimo 1

2007-03-16 21:16:06 · 5 answers · asked by smoke~ 1

only a very small amount ram is required and the computer tasks are all using physical memory by hardisk. Nowaday, the hardisk is running at high speed SATA3.

2007-03-16 21:12:32 · 12 answers · asked by Just Nice 2

2007-03-16 20:58:50 · 1 answers · asked by MATH!!!! 2

It's happening for 3 weeks. DVD-ROM is working well and CPU is fine. please help me....

2007-03-16 19:50:23 · 4 answers · asked by MaDMan. HaCKeR 2

pc hardware, sofeware, faqs etc.

2007-03-16 19:18:17 · 6 answers · asked by totie boy 1

The ATI Radeon Xpress 200M or NVIDIA GeForce Go 6150?
I am not sure which has the best features, could someone break it down for me? Would love to know! Thanks!

2007-03-16 19:01:46 · 4 answers · asked by Anonymous

2007-03-16 18:51:46 · 4 answers · asked by Ganesan's son 1

2007-03-16 18:37:04 · 6 answers · asked by LAROCA 1

1.AMD Athlon 64 3500+ Orleans 2.2GHz socket AM2
or
2.Intel Pentium 4 650 Prescott 3.4GHz LGA 775

2007-03-16 18:24:43 · 3 answers · asked by U can't B like me 5

I was wondering, cause it's on slow motion, and it sounds terrible.

2007-03-16 18:23:24 · 4 answers · asked by soulmaste777 2

i have good video card ATI x650..some thing like that a very good 3D it can run hardcore 3D games ..so can i run windos vista Vista Ultimate ?

2007-03-16 18:05:09 · 2 answers · asked by randike2007 1