Motorcycles - October 2007

In my state we can have seven letters (or numbers). I have a cute little 50cc scooter which I just love and I'm looking for ideas for a custom licence plate. I love pink, cats and other girly stuff. Does anyone have any ideas? Thanks heaps!! :o)

2007-10-27 22:32:03 · 7 answers · asked by Honey Bee 3

What will motorcycles look like and run like 10 years from now?
I think most bikes will be automatic clutches simular to ATV's and bikes will have 3 or 4 wheels simular to UTV's and they will have movable frame joints that link the suspension at all points of the bike.

2007-10-27 22:07:58 · 12 answers · asked by Anonymous

I ask because I'm 45 been riding 40 years and hope to be able to ride into my 70's or even 80's.
I figure when I finally do bite the dust it will be with a bike under me.
So tell me some ripe old ages that still ride?

2007-10-27 14:32:12 · 17 answers · asked by Anonymous

what needs to be done to have jet skies stored safly in the winter without having to spend 100 a ski. i kno wyou have to run the water out of them and maby put a littl eoil into the cylanders but how do you have water run thru them so you can put in the winterization gell. i have a kawi super sprort xi 750 and yamaha wav radior 700 bolth 94 s

2007-10-27 13:57:22 · 1 answers · asked by Anonymous

2007-10-27 13:55:43 · 10 answers · asked by Simon M 2

i am getting a 125cc motorbike for my 17th and want to know generally how fast a 125cc bike can go or what speed a honda cbr125 can go.

2007-10-27 13:10:58 · 14 answers · asked by J L 1

does anyon know what the parts books or maual holders are called thet the shopes have. there like in a v and can hold multiple books so they ar eeasy to just flip the to page you need. i used to have one but cant fined one and dont know what there called.

2007-10-27 13:09:41 · 1 answers · asked by Anonymous

2007-10-27 12:56:32 · 15 answers · asked by Lleh 6

The motor displacement is listed as 96 (cubic inch) However, no one I have asked seems to know the horsepower it has.

2007-10-27 11:14:43 · 11 answers · asked by Miss J 2

Just curious.

2007-10-27 09:23:05 · 18 answers · asked by Mike T 1

Im16 am i allowed to get a motorcycle permit

2007-10-27 08:54:53 · 3 answers · asked by ar3rocker 2

2007-10-27 07:33:32 · 7 answers · asked by M.L. M 2

2007-10-27 07:31:32 · 3 answers · asked by Jason A 1

i need to know the factory setting for a 2001 Polaris Scrambler 90cc on the jetting ( specs ) size and everything

2007-10-27 07:29:41 · 2 answers · asked by john m 1

You know when you get a new bike it starts in like 2 kicks.
Why does my bike start in like 15.
is there anyway i can get it starting in one or two kicks again?

2007-10-27 07:10:52 · 4 answers · asked by Nissan Enthusiast 2

i have a 2007 yamaha raptor 350 and i want to know which are the best brands and other info about buying a loud and more powerful pipe of my atv.

2007-10-27 05:27:14 · 5 answers · asked by quadsrlife719 1

Why do my neighbours that have motorcylces feel the need on a Saturday afternoon to stand and watch their bikes with the engines running. Often they seem to be "tinkering" with the engine or just enjoying the sound. Car owners do not as a rule do this. Surely if I went out and sat in my car and revved it and played with its engine something would be said.

2007-10-27 05:10:38 · 18 answers · asked by Anonymous

2007-10-27 04:52:53 · 5 answers · asked by Anonymous

2007-10-27 04:32:45 · 12 answers · asked by ancbball 1

I have an imported old suzuki DR600. I need some engine parts and have sourced a supplier but they can only supply the official uk parts. It is a lot of money so I need to know that these parts are interchangable. My serial number starts with SN41R where as the official uk parts are SN41A. I have read in the past that all the engines are identical but now I need some good sound advice from somebody who knows about these things or pointing in the right direction... anyone?? thanks in advance!

2007-10-27 01:25:41 · 4 answers · asked by kevsticle 1

is there any way to get the catologs the dealers get with every part imaginable from the first bikes to the present or do you have to be a dealer.

2007-10-26 15:14:40 · 3 answers · asked by Anonymous

82 Yamaha Virago 750. Two nights ago, after making some repairs, it fired up beautifully (though it was idling at 3000 RPM for some reason). I shut it off and left it for the night. Next night, I fired it up, it idled at 1000 (normal) then when I hit the throttle it climbed to 4000 then sputtered and died. Now wont start.

Battery fully charged. Recently dismantled and cleaned the carbs. Spark plugs arc when tested. Clean fuel flows from tank to petcocks, and from petcocks to float bowls. When I try to turn it over the starter motor revs and revs, I can hear the engine cranking, but the bike will not fire up. Occasionally it catches once and fires one piston.

I am fairly certain that the fuel is getting into the combustion chamber, as there is an occasional small backfire out the tailpipes, but I could be wrong.

Other things I have checked - the throttle cable and choke cables are limited correctly. The choke is open, kill switch to ON position, petcocks set to PR (prime). Advice?

2007-10-26 13:27:42 · 7 answers · asked by sculptorjmbudka 2

2007-10-26 12:53:48 · 8 answers · asked by Scarface 2

ok so i have this 1983 enduro and it runs great after it gets warmed up and keep it at the high rpm's but as soon as you let go of the throttle for 5 seconds it will stall right away and it is hard as hell to get started. I allready cleaned the carbs twice and i was wondering if anyone has any simple suggestions for me to get this thing running like new. All and all this is a great bike.

2007-10-26 12:47:34 · 5 answers · asked by bulletproofcracka 1

My "friends" are being jerks about teaching me about how to ride a dirtbike with a clutch. So they are going around on my friends dirtbike, while I sit inside and do nothing. They said that I can't ride it because i don't know how, and when I ask them to teach me how to ride it, they say "what would your mom say?" But she wouldn't care, and I am actually a very good driver and I am talented at things like that. Will someone please tell me how to ride a clutch?

2007-10-26 10:44:39 · 4 answers · asked by Anonymous

I have a CX500E, the other day I came from work and stopped at the shop, turned the bike off. I came back, turned the ignition on...nothing, there was no oil light, no neutral, no indicators, and the electronic ignition didn't start either, had to push it home, I have checked the fuses, the ignition switch and they are working and the battery is good...it has me stumped so I'm looking for any suggestions....thank you

2007-10-26 10:33:48 · 2 answers · asked by cxorphan 1

How does a Chinese one compare to say a Vespa?

2007-10-26 07:44:57 · 14 answers · asked by Simon M 2

2007-10-26 07:30:20 · 12 answers · asked by zipwinger 1

or tell me how...

2007-10-26 06:57:21 · 4 answers · asked by egy 2

My neighbor has just bought a Harley Davidson but it is second hand and he cannot get the manual until about a week, he now cannot start it as the ignition requires some knowledge on how to get it going.

Can you please help me or refer me to a site that has a manual for it?

Model: Ultra Classic Electra Guide - FLHTCU

THANX

2007-10-26 05:51:51 · 12 answers · asked by Anonymous