English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have a CX500E, the other day I came from work and stopped at the shop, turned the bike off. I came back, turned the ignition on...nothing, there was no oil light, no neutral, no indicators, and the electronic ignition didn't start either, had to push it home, I have checked the fuses, the ignition switch and they are working and the battery is good...it has me stumped so I'm looking for any suggestions....thank you

2007-10-26 10:33:48 · 2 answers · asked by cxorphan 1 in Cars & Transportation Motorcycles

2 answers

Did you check the main fuse at the starter solenoid?
Red at ignition switch should always have power.
If not, dead battery, bad battery ground or loose terminals, bad main fuse.
If still no power to switch, run a jumper wire from the battery to red at switch.
Black at ignition switch should have power when the key is turned on.

2007-10-26 12:44:46 · answer #1 · answered by guardrailjim 7 · 0 0

you must have a bad ground somewhere

2007-10-26 20:12:08 · answer #2 · answered by Anonymous · 0 1

fedest.com, questions and answers