Maintenance & Repairs - November 2006

fullsize 1974 blazer. It has ac, but uses another belt

2006-11-13 10:19:11 · 4 answers · asked by bobby b 2

2006-11-13 10:17:12 · 1 answers · asked by jack s 1

I was rear ended today. All that my car sufered, from what I could tell, was a small scratch on the back bumper.

My question is, what if anything, might I want to look for/at in the way of "hidden" damage, that could occur from such and accident.

Im not asking because I feel like there is additional damage, I would actually be suprised if there was. Im asking really because the scratch is so minor, I figured if thats all the damage, I wasn't even gonna worry about reporting to thier insurance.

So I just want to find out if there is anywhere in particular I should look at/check for hidden damage.

2006-11-13 10:10:14 · 6 answers · asked by bdb4269 2

How do I change a front wheel bearing, removing a front 4x4 clutch system in the hub???? I need help.

2006-11-13 10:07:55 · 3 answers · asked by chemical_intent 1

2006-11-13 09:53:30 · 9 answers · asked by shannator315 1

Sometimes when I floor it, the transmission makes a loud noise when going from 2nd to 3rd. It is like a "wha wha wha" type of sound and then it goes into gear. Basically, it is the engine reving more than it has to. It happened when I had a tranny leak and it usually happened when the tranny fluid was really low. Do you think it is just because the fluid was low or is it something more than that. I had the transmission rebuilt less than two years ago and when I got my leaks fixed, the mechanic thought it was rebuilt 2 months ago. It only happened when I floored the gas pedal and there are no other problems when there is normal driving.

2006-11-13 09:47:48 · 5 answers · asked by heavychevylt1 1

I backed into my husband' car with mine and dented in the area just in front of his driver's door. The door now barely opens. Is there some way to pull out the dented in metal without much additional damage? I called an auto body place, and they guessed that such a repair would cost between $800-$1500. I can't afford that right now. Any suggestions?

2006-11-13 09:44:51 · 2 answers · asked by tennesseelady 1

1998 GMC Yukon 4wd automatic; vehicle vibrates at high speeds, usually on highway above 65 mph; slight shaking feeling.

2006-11-13 09:39:57 · 10 answers · asked by ThreeKings 1

I have heard of a professional spray on window tint for cars. This is done at a dealship not an over the counter product making it look like the built in tint on car windows. No shop in my area has heard of it and I really don't like to look of the film tints. Can anyone help me with this because I'm tired of all the glares from the sun.

2006-11-13 09:26:50 · 0 answers · asked by meliarrow 3

When i try to start my car it seems to have trouble turning the motor over.
I know there is nothing wrong with the cars motor because it Runs well.

2006-11-13 09:26:25 · 4 answers · asked by matthew w 2

in az. heres the #'s hc: 1.05 needs to be 1
co 17.82 needs to be 12
and nox 2.19 needs to b 2.5 that part passed
thats with a new o2 sensor
its the 1.6l stick si

thx all

2006-11-13 09:09:36 · 3 answers · asked by flydudea 1

I have a 2001 GMC Sierra and the passender window all of a sudden stopped going up or down. When I press the button, it still makes the noise like it is trying, but the window doesnt move. It broke one day when I just rolled the windows down and heard like crunching noises and the window just got stuck. Now I have to push it up and it stays for a while but comes down with bumps. Im just afraid it is going to cost a fortune!

2006-11-13 09:04:36 · 3 answers · asked by MG85 3

i just want to know if its their fault coz now they say its coz it 's rubbing to the rotor,coz they have to cut it to put the new brake pads,but when i asked why i doesn't do that before even when the brake pads were thin, he couldn't answer me.Do u think they want more money for a bad work?What can i say to make them take the car back to get it fixed w/o paying for the parts they want me to pay for ?

2006-11-13 09:03:16 · 3 answers · asked by kayla 1

When i try to start my car the solenoid and power cable on the starter motor get very hot and start to smoke.

2006-11-13 09:01:34 · 4 answers · asked by matthew w 2

the car is renault scenic 1.6 petrol, the problem only happens when i give it liitle gas in 2nd/3rd gear, if i put my foot down it disappears????

2006-11-13 08:42:36 · 10 answers · asked by key_matic 1

it s a mazda 626 1994

2006-11-13 08:26:11 · 4 answers · asked by JACOB K 1

At first it just moved around, never going above the speed I was actually going. This morning it was working fine. Now it won't work at all.

2006-11-13 08:24:34 · 9 answers · asked by JT 1

Is it really that hard to change one injector? The part is only $70.00 at Autozone. Anyone know what's involved?

2006-11-13 08:13:03 · 7 answers · asked by shadetree11_22 1

2006-11-13 07:55:37 · 9 answers · asked by Dave..... 3

I have a 1988 S-10 Blazer 4.3 TBI 4WD. The oil filter is on the driver's side fender with 2 lines running to the lower engine. I can see oil leaking, but not sure how to fix it. It is in a pretty tight spot. I guess the oil lines go to a sending unit that sends oil to the filter. Any suggestions or ideas would be appreciated. Thanks.

2006-11-13 07:53:12 · 6 answers · asked by Anonymous

I have a 2000 eldorodo caddy, it will spit out alot of coolant fluid once a week, once i put more back in its fine it will not drip an ounce!! I searched all over for holes or anything lose and could not find anything, does anyone have any idea!!! please help

2006-11-13 07:51:10 · 3 answers · asked by Anonymous

technical institute is good UTI....wyomingtech...etc..

2006-11-13 07:41:13 · 1 answers · asked by :) 2

I was following directions from an Edmunds website, and one paragraph said this...

The rotor is that shiny metal disc staring you in the face right now. You can almost see your reflection, right? Get your eyes level with it. If you can't see your face, or at least its general outline, it may mean that the disc needs servicing or replacement. Below, we'll show you how to check this disc for scoring or marring, and what to do about that.

If my rotor is covered in brake dust, will I still be able to see my reflection?

Does a LOT of brake dust mean its time to change my breaks?

2006-11-13 07:20:47 · 6 answers · asked by Anonymous

2006-11-13 07:17:11 · 5 answers · asked by frankie c 1

2006-11-13 07:13:36 · 3 answers · asked by fred f 1

sometimes when i take off i can hear a noise like there is something loose in my car. this is the first manuel trans. that i have ever owned and im afraid that i might have burnt out of started to burn out the clutch.

2006-11-13 07:00:29 · 4 answers · asked by jessica l 1

2006-11-13 06:54:54 · 20 answers · asked by brent p 1

I bought a car at a used car lot. Powerwindows worked fine at the time. One week later, passenger side goes out. Is it my responsibility or the owners to pay/fix it?

2006-11-13 06:50:20 · 18 answers · asked by roguequeen69 2

'99 Mercedes Benz E320. The grip broke, but I can release the parking brake by gripping the shaft. It's located on the left under the console.

2006-11-13 06:37:58 · 5 answers · asked by modmob 1

How can I make the transmission on my 1998 Honda Civivc I just got last........ It has 100,000 miles.

2006-11-13 06:29:05 · 10 answers · asked by Anonymous