When i try to start my car the solenoid and power cable on the starter motor get very hot and start to smoke.
2006-11-13 09:01:34 · 4 answers · asked by matthew w 2 in Cars & Transportation ➔ Maintenance & Repairs
check for tight connections on both ends. there may be corrosion or such on the connector. a good steel brush or a scotch brite pad should do it also make sure connections are tite
2006-11-13 09:21:15 · answer #1 · answered by michealdanaustin 1 · 0⤊ 0⤋
the starter solenoid is undesirable, if it gained't disengage, the nice and cozy twine is mearly form the quantity of modern-day it fairly is being drawn through the starter. verify the twine for corrosion on the terminals yet except that it feels like the selenoid is brilliant up. maximum places will verify them for loose in case you pull it and take it to them.
2016-11-23 20:02:55 · answer #2 · answered by ? 3 · 0⤊ 0⤋
wow, if it hasn't burnt down yet clean all of the connections and to be on the safe side replace the cables, starter and put a big ground strap from the block to the frame, you need to get this diagnosed and repaired by a good shop , good luck
2006-11-13 10:40:59 · answer #3 · answered by sterling m 6 · 0⤊ 0⤋
Either your connections isn't good, or your solenoid or starter maybe out.
2006-11-13 09:05:06 · answer #4 · answered by brndn 1 · 0⤊ 0⤋