Do It Yourself (DIY) - November 2006

Do I open it from the front and pull the drum out? I bought the kit with the pulleys and belt in it.

2006-11-13 02:44:59 · 2 answers · asked by SmartPerson 1

2006-11-13 02:34:23 · 6 answers · asked by Terri P 1

i know NOTHING about how to do it or what i need. Could someone just list all the tools and equipment i would need to buy or rent to complete this job myself? ie, tiles, tile cutter, ?, ?, ?... etc.
thanks.

2006-11-13 02:12:39 · 8 answers · asked by abbie 2

finished look? the baseboard molding is rather simple. it is flat, about 3 inches high with a slight decorative bevel at the top. there is no gap between the baseboard and the wood floors. i sort of feel i could get away with not bothering with quarter round molding in this one bedroom where this is the case, but i wonder is quarter round molding considered necessary in this situation to create what is considered a finished look? to me, it looks fine, but i wonder what others might think.

2006-11-13 02:00:12 · 6 answers · asked by Mark 1

2006-11-13 01:11:01 · 15 answers · asked by David N 1

2006-11-12 22:20:14 · 6 answers · asked by Brian B 1

I need a battery operated micro water pump (with 1/4" tubing) that pumps between 45--65 gallons of water per hour (GPH). Where might one be sold? (Either online or a specific store. I don't want to get anything from eBay.)

2006-11-12 18:55:01 · 7 answers · asked by flying_v_goddess 1

I recently purchased a house and noticed that a particular toilet in the house always smells. I'm not sure if it's the toilet water or the bowl itself or what, but I can't figure it out. I clean the toilet constantly with 409 and Lysol and have tried using the 2000flushes product to clean the toilet bowl water, but nothing seems to help. Does anyone know what could be wrong? The odor that comes from the toilet is extremely bad and only comes from this particular bathroom.

2006-11-12 17:14:18 · 6 answers · asked by JT 2

2006-11-12 17:13:43 · 8 answers · asked by joganought 1

It was disgusting but I got all the urine calk off of there and cleaned it with alcohol and calked it with new calk. Now it still smells like urine in there and it's been 4 days. What do I need to do to fix this and make this smell go away??

2006-11-12 16:47:11 · 9 answers · asked by Corona 5

2006-11-12 16:23:44 · 5 answers · asked by Anonymous

I bought my husband a router for Christmas. The manual states that it is table mountable but additional hardware is needed. It does not state what hardware though. I would like to be able to include this bracket (or whatever it is) in for a complete gift. What do I need to purchase? The Router is a Cummins if that makes a difference.

2006-11-12 15:38:41 · 10 answers · asked by frazzled over halloween 1

2006-11-12 14:39:25 · 5 answers · asked by Anonymous

I'm planning to build a brick patio without mortar. Is there a quick and easy formula for estimating how much brick I'll need?

2006-11-12 14:16:23 · 6 answers · asked by mylapsuslinguae 1

Does Magnetic Paint really work? I would like to try magnetic primer under chalk paint. Has anyone tried this? If so, how many coats of each Magnetic primer and chalk paint do I need. I'm doing 32 sq feet. Thanks

2006-11-12 14:00:09 · 2 answers · asked by spoogebobscarepants 2

2006-11-12 13:50:51 · 4 answers · asked by matthew 1

I'm planning on doing a lot of framing and wonder if I can use my clipped-head nailer or should I buy a Round-Head one. What are code inspectors saying about clipped nails and can or should I use them.

2006-11-12 12:22:37 · 3 answers · asked by Pooch 2

I am planning to paint but due to budget, this time I may try a cheaper paint from home depot ($18 per Galon) rather than what I used to use CIL ($28 per Galon). Does it really matter? because I have whole house interior to paint for 2 coats, the cheaper paint can save me about $500 in total. Your advice please

2006-11-12 11:18:58 · 10 answers · asked by 1001Questions 2

Are they in good working order? Do you keep them clean? Do you lend them out to others?

2006-11-12 11:15:39 · 16 answers · asked by jdhayman 5

My BF (condo-owner) insists on laying the cable. Can you lay cable over/around a doorframe? I don't think so. Is there a code on that? I'm not sure. I'm thinking lay it under the hardwood floor to get it across the room, not around the door frame. He says that's too difficult, afraid of breaking the planks. What's the best way to do this?

In my old condo, I had the cable layed under the hardwood floors throughout my place. I had extra hardwood planks, my BF doesn't have any extra for his.

Need help, some solid advice or suggestions.

2006-11-12 09:49:16 · 5 answers · asked by hi2felix 1

2006-11-12 08:00:12 · 8 answers · asked by Shea Butta 3

2006-11-12 06:23:59 · 7 answers · asked by Anonymous

2006-11-12 05:41:59 · 12 answers · asked by Anonymous

I was thinking about punching holes in pieces of paper and stringing them up or putting them in a binder. I'll use a glue stick to stick on the pictures. Is that ok? I don't get to see my dad often, so I came up with this idea for a Christmas present.

2006-11-12 04:05:27 · 5 answers · asked by Anonymous

Well...heres The deal...I'm makeing a fleece blanket for someone special...and wanted to personalise it with embroidery...Only I've never embroidered. If someone could suggest a kit, or tools with would be helpful when trying to learn, I'd be grateful.

2006-11-12 04:04:43 · 4 answers · asked by BlondeQT 3

i tried to bleed my radiator and i was told to do it until the water comes out i have tried this for over an hour does anyone know how long it will take should i have my heating system running while i am bleeding them

2006-11-12 03:56:14 · 29 answers · asked by Anonymous

I wanted to know there are how many types of sheetrock. what is type "C" and Type "X"?
Thanks

2006-11-12 03:33:36 · 5 answers · asked by shahidnyny 1

2006-11-12 03:02:02 · 10 answers · asked by Anonymous

I would like to be able to set each thermostat and have both independent. I realize cutting the 2nd one inline to the exisiting and running the original in fan only will work, but I don't want this setup.

2006-11-12 02:17:06 · 6 answers · asked by srie 1

I bought some cinnamon sticks to smell up the house?They smell but is there anyway i can inhance to go all through the house? thanks!

2006-11-12 02:03:33 · 15 answers · asked by cutenwild1769 5