Other - Hardware - September 2007

I have a Gigabyte Motherboard "GA-8I865G775-G" and i bought an Intel E2160 CPU (1.8 Ghz dual core 1MB cache).
Now I Don't know if it supports or not. the sucket Looks the same but I'm not sure.

2007-09-27 22:35:03 · 3 answers · asked by sunshinemistery 2

Such as SATA II hard disk drives?

2007-09-27 19:54:51 · 2 answers · asked by CF6-80C2 2

Without any graphics card support Half Life 2 is smoothly running to a medium cost intel cpu+Mother board based PC ! Graphics is not bad . Can the playing damage the PC future?

2007-09-27 19:31:44 · 7 answers · asked by Anonymous

2007-09-27 18:53:35 · 9 answers · asked by default 2

I need some info from an xP drive, but it's current computer is broken. Could I install it as a slave in another xp computer, then move it back when the other computer is fixed?

2007-09-27 18:11:22 · 5 answers · asked by okonomiyaki 2

On Pentium R (D) CPU 2.80GHz 4GB of RAM
Is it normail to have the following? :
CPU Temperature: 51 celsius / 52 celsius
CPU Fan Speed: 2115-2190
System Fan Speed: 1435-1472
Thank you very much for your help.

2007-09-27 17:57:24 · 6 answers · asked by Davit T 1

2007-09-27 16:55:06 · 2 answers · asked by PoWeR 2

I have a black screen and can't boot it up. I was told that I might have to reinstall the Windows XP . I don't have the disc that came with the computer, but I have another Windows XP install disc that came with my laptop. Can I use this disc or does it have to be the one that came with my PC?

2007-09-27 16:11:48 · 6 answers · asked by Pepper's Mommy 5

i think that the intel GMA X3000 is the best but i see also the radeon x1250 and the nvidia geforce 7150 so i'am a bit confused
there will be GMA X3500 soon and that's the ultimate one
but i'm on a harry
note:
1-may be i am missing any thing so if there is other models of GPUs please refer to
2-please tell me the best GPU and in which Motherboard
Thanks alot.

2007-09-27 12:08:28 · 2 answers · asked by sox7000 1

2007-09-27 10:47:28 · 2 answers · asked by snshine1083 1

I am overclocking my Q6600 and have hit a wall staying stable at 4Ghz.

I can run stable at 3.6Ghz , but anything over that, the system will boot into windows up to 4Ghz, but any attempt to run Prime95 the pc restarts automatically.

Now I am thinking the issue is with my PSU. I currently have the Antec Phantom 500, it has 2x 12v rails.
12v1 = 17amps
12v2 = 18amps
for a total of 35amps.

I know the cpu is using 1 of the rails to itself.
Now is it possible that the cpu is trying to pull in more than 17 or 18 amps when overclocked above 3.6Ghz , and since the rails are capped at 20amps the cpu isn't getting the amps it requires, hence causing the restarts?

2007-09-27 09:23:54 · 2 answers · asked by Venom 5

I just recived my q6600 processor and it came with a fan. on the Bottom of the heat sink there is 3 strips of what looks like thermal paste or something. should i wipe it off and use my own or should i just use theres im not OC'ing

2007-09-27 08:28:08 · 1 answers · asked by Anonymous

its keep making noise as if i am downloading or playing games online

2007-09-27 08:11:08 · 11 answers · asked by ziggey_uk 1

I want connect a pc to my new tv using a vga cable how do i get the sound to come through the TV speakers.

2007-09-27 06:14:54 · 5 answers · asked by mike 1

Just wondering hmmmm....


Thanks....

2007-09-27 05:30:27 · 4 answers · asked by Taarnick Nolth 2

I have to copy some papers for work, but they all have a red background with black words. How can I successfully copy this? Any help would be greatly appreciated!

2007-09-27 04:50:43 · 2 answers · asked by Anonymous

Which one would be best in terms of the database performance? Did anyone ever try to test out this configuration? Thanks.
-Ade

2007-09-27 04:35:08 · 3 answers · asked by OptB 1

My dad did something to my computer which cleaned up my hard drive, by compressing files. I'm not sure how he did it, all I remember is he went in to something, and then box appeared, and he clicked on something...
Not very informative, I know...
But it needs saying...
So, anyone got any ideas??

2007-09-27 04:22:17 · 11 answers · asked by Starry-Eyed Surprise 1

where do i go in my comp 2 change which drive is slave and which is master...no discs.....i see the end of the ribbon has a connection..with a 4 prong at the end...does the 4 prong need 2 be hooked 2 the slave or the master....the jump seems 2 be in the right place....a-b....i connected the slave 2 the second connection on the ribbon.......so where do i go to tell the comp what 2 read 4 master and slave......

2007-09-27 00:54:00 · 3 answers · asked by willy stride 1

2007-09-27 00:23:58 · 3 answers · asked by Anonymous

when i click on refresh button it takes lots and lots of time to refresh.

2007-09-27 00:13:15 · 7 answers · asked by sumit c 1

especially the chatting

2007-09-26 23:33:21 · 2 answers · asked by jlo 1

can any1 tell me how wide the address bus is for the Atmel_ATmega406,?

2007-09-26 16:00:09 · 1 answers · asked by ? 3

2007-09-26 15:33:35 · 3 answers · asked by Nyne 1

i left my computer in my car during a hot day. for the whole entire day. i was bringing it to my friends house but ended up changing plan. but i finally got home at night and took it out to plug it in. it turned on all the lights are on. but my screens says "no signal" what does that mean? i changed my video card back to the old one that used to be in it. and still "no signal" i took the old card and plugged it into an old computer of mines and it worked. so i was thinking it wasnt the video card. what could it be?

2007-09-26 14:14:23 · 3 answers · asked by helloguy 2

my cousin gave my other cousin her old PC an XP since she got new one.....the problem with it she told us is that the cd drve doesnt work it doesnt read cds its an eMachine i also have an eMachine....and when u turn it on it says missing NTLDR ive seen that before on a laptop, i had a windows XP installer i used on a comp. i had, when i put the cd in it doesnt read on there comp like it does nothing it doesnt work it opens but doesnt read anything, so what can i do to make it read a cd so i can install XP on there computer...would a separate usb cd drive work and use that to replace the one already in the computer?? or are those only for burning ?? if it can work like that what kind (as long as its under $100)

2007-09-26 11:56:13 · 4 answers · asked by dmenace816 2

My budget for new PC is 700 - 1000 usd

2007-09-26 07:17:59 · 2 answers · asked by lightonokira 1

2007-09-26 05:40:38 · 2 answers · asked by Halu 1

2007-09-26 04:29:24 · 1 answers · asked by mitchey 2

Though ZIP drives and few other special devices are currently there for mass storage, they can't be used universally in all computers with ease.

2007-09-26 03:22:07 · 9 answers · asked by Anonymous