Other - Hardware - January 2007

dell c600 hardrive to small want a bigger one.Need stepsto save what is on old hardrive

2007-01-15 09:54:40 · 2 answers · asked by gdun36 1

Here are the specs:

Full ATX tower with integrated USB 2.0/ Firewire ports and a 200MM Top Fan with a clear see-through side.

MSI Motherboard with ATI X550 chipset for PCI ExpressX16 Crossfire.

CPU is an AMD Athlon 64X2 4600+

Ram is 2.0GB of DDR2 800 (PC 6200) Motherboard supports up to 8.0 GB of ram.

Video card is PCI ExpressX16 slot,
ATI Raideon X1950 Pro, 256-Bit GPU, 256MB of GDDR3

Hard disk is 250GB Serial ATA II 300MBS
DVD +-RW 16X DL Serial ATA interface.

Serial ATA II Raid

19 Inch LCD Widescreen display

Wireless Mouse, Keyboard, Gaming Joystick.

500 Watt ATX Power Supply

So what u think?

2007-01-15 09:49:17 · 4 answers · asked by Anonymous

What do you think of the price and the quality of their computers? Did you ever had a problem with them? If yes, were you satisfied with their customer service? Do you recommend gaming pcs from LU computers? Other comments and opinions might be helpful. Thank you.
heres the site www.lucomputers.com

2007-01-15 09:30:34 · 1 answers · asked by Anonymous

360 to me is where I learned about computers on punched cards...

2007-01-15 09:07:45 · 5 answers · asked by fjpoblam 7

I get so confused at the store. Can someone tell me which media is best for each task.

2007-01-15 09:02:01 · 15 answers · asked by npsems 1

I have a PC (Philips LS2000) running Windows Media Centre Edition and it has a TV tuner installed Apparently. I have hooked the main TV aerial up to it but I think I need more wires?

Any ideas?

2007-01-15 08:55:56 · 1 answers · asked by youronmyfoot 2

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00683218&lc=en&cc=us&dlc=en&tool=prodinfoCategory&query=sr1901wm&product=3184156&dest_page=prodinfoCategory# this is my mobo.... this is the site I want to buy from http://www.newegg.com/ can someone tell me what the best processor to buy under $250 for a gaming pc would be

2007-01-15 08:41:43 · 2 answers · asked by Joe 1

I recently bought a new Maxtor IDE hard drive to use as a slave unit for "ghosting".
I set the jumper for slave use, and wired the unit to the slave connection on the IDE HD cable, but my comp. did not detect it. Thinking that the jumper may be set wrong, I altered it to the master setting, which I hoped would cause a conflict with my main hard drive, but my comp. still refused to detect it.
I have now disconnected the main hard drive, and have now installed the new unit as the master, but still my comp. refuses to recognise it, and says that no hard drive is present, although the hard drive is pwered up and "whirring" away quite happily.
Can any of you 'techies' give any light to what may be wrong??

2007-01-15 08:25:19 · 11 answers · asked by shyped 2

How can I find out if my PC is a 32-bit or a 64-bit?
And no,I don't have any of the boxes that the hardware
initialy was!

2007-01-15 08:08:05 · 4 answers · asked by tzanak 1

2007-01-15 07:53:46 · 6 answers · asked by Anonymous

my motherboard is a http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00683218&lc=en&cc=us&dlc=en&tool=prodinfoCategory&query=sr1901wm&product=3184156&dest_page=prodinfoCategory#

and what I want to put in it is http://www.newegg.com/Product/Product.asp?Item=N82E16819103759
and
http://www.newegg.com/Product/Product.asp?Item=N82E16822144016
I'm pretty sure the mobo can handle the processor but i have never used a sata drive before so im not sure how it works.

2007-01-15 07:40:46 · 2 answers · asked by Joe 1

2007-01-15 07:00:11 · 3 answers · asked by steinwayboy 2

How do you install a HDDWD with 80 GB in a winows XP purchased in 2003

2007-01-15 06:57:42 · 6 answers · asked by Anonymous

I need help, right away. I've got a project due tomorrow, and I need to know how the CMOS always has the time correct on a PC. Please help!

2007-01-15 06:53:35 · 4 answers · asked by ♥horsegal186♥ 1

Can i buy a dual core prossesor and straight swap it with my pentium 4 2.4ghz?Will it work and will it make my computer faster???

2007-01-15 06:53:23 · 4 answers · asked by Anonymous

I"m using P-IV WIth the motherboard of Gigabyte GA-8VM533 (Available with 2 DIMM slots supporting up to 2GB of DDR266/DDR200 memory, GA-8VM533 provides the highest performance platform with the highest bandwidth (2.1GB/s) mainstream DDR memory solution) as per their Website. I have placed PC3200 DDR SD RAM Of 256MB but I'm not getting any display. Can anyone tell me the difference between DDR266/200 and PC3200? Is it not compatible wih my system, or I have some other problem ? Pls Help

2007-01-15 06:16:43 · 4 answers · asked by Amit Dubey 2

2007-01-15 06:11:15 · 2 answers · asked by DONNA W 1

anyone? or how can i make it run if it has no ram

2007-01-15 05:41:06 · 5 answers · asked by My Answers are always right. 2

I have a 160 GB Western Digital HD that I bought a while back. I just installed Partition Magic 8.0 and made two separate partitions, C: and E:. I set aside most of the space for the E: as it is my media drive. Looking at the drive properties, it says the following: Size MB: 132, 065.6 | Used MB: 131, 494.6 | Unused MB 571.0 | Status: None | Pri/Log: Logical. This partition lies within the Extended portion. My question is, why does it say that only 571.0 is unused when I've only used a fraction of that amount? Where did all my other space go??

2007-01-15 05:36:22 · 4 answers · asked by xstuartbarrettx 2

Ok so I just upgraded my computer and I only have 1 IDE hookup on the motherboard and 4 IDE devices. Is there any way I can hook the other 2 devices up through the SATA ports via a converter or something? I really do not want to go buy new hard drives since I just sunk $1350 into the other parts. Oh and I don't have room for a PCI card.

2007-01-15 05:28:47 · 5 answers · asked by Plushified Naruto 2

2007-01-15 05:28:16 · 9 answers · asked by forestrchamps 2

I've watched shows on abc.com before with no problem. But now all of the sudden it's telling me I have low bandwidth (or whatever) and the the program won't run properly. It's choppy, freezes and sometimes shuts down all together. My computers new from christmas so I'd like to think it that it wouldn't be having this problem. But....it is! Help! :)

2007-01-15 05:00:16 · 7 answers · asked by LMT 2

I had a problem with zombie malware turning my laptop into a spamming machine, so I tried to rescue the situation by formatting my PC.

First though, I tried creating a disk partition, and installed Windows 98 into the new primary partition. It wouldn't let me create one though (I tried everything - primary partitions, extended partitions, logical drive etc).

So, I tried to format my PC - but the DOS prompt wouldn't let me - it said that something else was using the C drive. When I tried to force close, it said that it couldn't lock the C drive and so couldn't format.

So, I gave up and turned my PC off. Now, however, when I try turning it on, I get an error message saying that my partition is invalid. I can't do anything at this point - it just stops the start-up process.

What can I do? I have a Toshiba Equium - I can't access the DOS prompt to format the disc and I can't get it to start-up to access the DOS prompt. All I can access is the start-up spec by pressing F2. Help!

2007-01-15 04:38:33 · 3 answers · asked by bunglejemson 1

2007-01-15 04:29:25 · 4 answers · asked by princess 2

2007-01-15 04:26:25 · 5 answers · asked by Bombshell 3

2007-01-15 04:01:03 · 8 answers · asked by Anonymous

How do I get back things that been delete on my computer. I am not that computer smart so please explain in detail.

2007-01-15 03:59:10 · 6 answers · asked by SUN FLOWER 5

2007-01-15 03:56:45 · 2 answers · asked by Santard 1

hum... so i have some questions about installing a new HD..
I am planning to build a new computer myself..
i sort of have some idea about the components now, but when it comes to put them together, the problems come...
i do not know how to install a new HD... like.. i don't know whcih wire goes to where... so can someone give me some info in details? thx!

2007-01-15 02:32:53 · 6 answers · asked by Brian S 1

what's ECC when they say 'no ECC' on memory stick for computers? And what does it do?

2007-01-15 02:17:48 · 4 answers · asked by franckoboy 3