Computer Networking - September 2007

is there any way? i think it's already in dynamic IP but Ip doesn't change or it just takes a loooong time that i barely noticed... what i noticed is the ip yesterday and today are the same.. i want to change my ip immediately but i can't... i wouldn't want to use other programs, as i know it can be done using my beautiful router! please help ~

2007-09-10 22:06:36 · 2 answers · asked by ToPe 3

I have a linksys wrt54g router that I am trying to connect to the internet. I am using ethernet connections to two computers. I can access both computers, but neither computer can access the internet. The router has the upgraded firmware, and all connections are good. I have done a complete power cycle and reset and still doesnt work. I have Verizon dsl, and have determined the router to be the problem. please help!

2007-09-10 17:16:06 · 10 answers · asked by lvi56111000 5

I have two routers. Router A(conn. to internet), and router b (diff. network). I have connected one of the available port of Router A to the wan port of router B. Router A IP is (192.168.1.x) and router B (192.168.2.x) with same subnet mask of 255.255.255.0.

From my PC on my router B, I can remote and ping PCs on router A, but when I am on PCs on Router A, I can't ping/remote PCs connected to router B.

2007-09-10 17:12:35 · 4 answers · asked by Mushashi 1

I have a linksys BEFW11S4 version 4 router. (I know it is crappy, but someone stole my good one). My computer does not recognize it, says I need to install a driver, can not find a driver, etc, but obviously my computer runs internet through it.

I have Vista and no install CD-- how do I get the computer to recognize what kind of hardware it is? Or, where can I get a driver? I followed instructions on linksys.com, but when I go to the IP address and enter the password they say, it says invalid.

Any help is greatly appreciated!

2007-09-10 16:44:50 · 6 answers · asked by D 7

2007-09-10 07:57:00 · 8 answers · asked by jison1234 1

Names of the equipment I need would be of help eg makes etc so I can look on ebay

2007-09-10 06:51:11 · 7 answers · asked by celtplayer 1

In Windows Xp you were able to mouse over the connection icon and it would say at what speed you were connected at. But with vista it does not seem to give any information. I was wondering if there is a setting to change or somthing that would give that information. I am not interested in doing it by connnecting to a website and doing a download test or somthing like that though.

2007-09-10 06:37:32 · 3 answers · asked by Anonymous

Hi, I started having problems using my WIFI on my laptop when I tried connecting to a network in another country. (Canada). Now I'm back in California making this work. It gives me an error message like, "cannot connect to website server" and it tells me to check my firewall settings, I did, but it's still not working. I might have changed the network settings when I was trying to get it to work in Canada. Anyone, please help me solve this problem. Thanks!

2007-09-10 06:29:31 · 4 answers · asked by elle 1

I am trying to setup and configure multiple access points with Netgear Switch for motel business. Currently the business has one modem and one Wireless Netgear WPN824 Router. I was told you would need a server to setup and configure multiple access point. but i do not understand why you would need a server? Is possible to setup and configure multiple access points on Netgear Switch? If not possible, what is another way to setup and configure multiple access points?

2007-09-10 06:23:55 · 4 answers · asked by Shawn P 2

i have utorrent i downloaded a movie off it but how do i burn it to a dvd ??? and how can i watch it ???????? thanks

2007-09-10 06:15:10 · 2 answers · asked by Anonymous

Here is the scoop. In my school we have 3 computer labs, each with 30 computers. All of these connect to a new Dell Server running Windows Server 2003, standard edition.

The server is setup as a file sharing printer and a print server.

Before the school year, we decided it would be nice to not have to walk the kids through setting up the printer, so we logged onto the client machines locally, and added the network printers, beliving that when the students logged on, the printer would already be installed on that machine.

Turns out we were wrong. So, I logged onto a computer, through the domain, with admin access and setup the printer. Still, when students log on, there are no printers installed.

So, my question is... how do I set this up so that when a new user logs on, the printer is already installed?

Thank you!!!

2007-09-10 06:12:24 · 2 answers · asked by bulldoze2005 3

If so, how? If not, which (wired only)router?

2007-09-10 05:54:02 · 5 answers · asked by Boom 4

Okay, I finally bought my new laptop computer with Vista Home Premium and I am absolutly in love with this thing. I couldn't believe that it was originally a $600 machine and I got it for $449 and with taxes $491.98 all at Best Buy yesterday. 1G of memory, Duel Core processor, wireless internet, vista premium, DVD Rom...etc.

Anyway when I try to connect to my wireless network at home it finds the signal and everything but when I try to connect it says can't connect and then diagnose the problem and then it says Windows can't connect because it's not picking up a response to the wireless router or an access point. However it connects fine with other networks. All the unsecure networks around my house and even the one at the College Library. It just won't connect to my home network. Can someone please tell me how I can fix this.

Also if your looking for a laptop and your on a budget I strongly recommend this lapto. Nice big screen and everything is crystal clear. Very fast laptop.

2007-09-10 05:45:32 · 4 answers · asked by UCLA kid, Go BRUINS!!! 1

I am on my 3rd router in 4 years. Its taken me this long to go through 3 because I don't have time to buy new ones every 3 months which is how frequently they stop working.

I had first a linksys with this problem after 1 month. Then I bought a netgear which had this problem after 1 month. The problem with these two was they would stop broadcasting the wireless.

Now I have a DIR 655. Had it for just over a month (so now I cant friggen return it easily). It drops the damn connection, then it reconnects. It goes in and out. I don't have any security enabled other than mac filtering. And it worked fine for 3 weeks so its not interference from anything in or around my house.

WTF anyone else have these damn problems?

2007-09-10 05:41:19 · 6 answers · asked by Anonymous

any links would be help full i need to move the d mark out of the boiler room

also how much does it cost per foot for a cat 5 wire

2007-09-10 05:33:09 · 1 answers · asked by Milton C 3

I have 2 computers in my house and only one hooked up to the internet by one cable modem. I would like to make both computers internet ready, so that both my fiancee and I can get online at the same time. What would I need to have to connect both computers up online and how would I do this ?

2007-09-10 05:09:28 · 5 answers · asked by Anonymous

How to set up a home network between 2 computers using cable... these pcs are linked to a wireless router individually...
but need to share files between 2 pcs ....

2007-09-10 04:59:19 · 6 answers · asked by Mil M 1

2007-09-10 04:51:49 · 6 answers · asked by Anonymous

Several train companies in the UK (and elsewhere I presume) now offer wireless internet on board.

I regularly use the internet on board GNER trains, and although it is very slow and regularly disconnects it is still useful.

I am curious to know how the moving train is able to connect to the internet? Does it involve some kind of satellite connection, or the mobile phone network, or is the signal sent down the overheard power lines?

2007-09-10 03:34:36 · 3 answers · asked by Jon S 1

Can I just use my wireless modem and do without my cable modem?

2007-09-10 03:30:12 · 6 answers · asked by cajundoe 1

I need to extend by 802.11b Netgear WiFi router to the signal can reach my living room on the other side of my "Faraday cage" of an apartment. The signal from my WiFi router almost reaches but it's quite strong enough for consistent Internet connection.

I assume adding a WiFi signal repeater and pluging it in half way between the two rooms is the solution. I'm mainly going to be using the signal for a Xbox 360 and my laptop.

Are there any "gotchas" about using repeaters for WiFi? Any models that are recommended by folks here?

2007-09-10 03:03:55 · 4 answers · asked by Jon C 2

I wanted to know will the signal strength be strong enough for the PC to work considering the distance is so much.

2007-09-10 00:43:50 · 5 answers · asked by A 2

Hi, How can i check bandwidth utilisation on router without using any network monitoring tool.
Is there any router command to check this ? Plz help.
Thanks

2007-09-10 00:38:18 · 4 answers · asked by adesh 1

2007-09-10 00:08:34 · 5 answers · asked by sudharsan v 1

Me and 3 of my friends went out and bought webcams. We all have them hooked up but we don't know how to hook to each other. How can I see my friends and them see me ? Can someone tell us how to go about this. We are all beginners so please explain in detail. Any help would be greatly appreciated.

2007-09-09 21:00:58 · 2 answers · asked by Roy 3

2007-09-09 20:58:14 · 2 answers · asked by tattletale 1

But sometimes when I boot up it shows up and works fine till I boot up again? It might be ther or not?

2007-09-09 20:21:48 · 3 answers · asked by doodlebugger69 2

does anyone know of any stores I can buy ethernet to usb converter??

2007-09-09 16:58:32 · 5 answers · asked by mrtimprather 2

I just hooked up the WRT54G Linksys wireless router and I am having trouble keeping it connected, the light on the front left side of the router is orange and when i push it it stays blinking white for a few minutes, and during this time I can connect wirelessly and then it turns back off onto the orange light, any ideas on what to do? Thanks!

2007-09-09 13:49:37 · 3 answers · asked by Anonymous

OK. I have no idea what I am doing. I am trying to make a website for my cub scout group. I was told to make one on Microsoft Word and save it as a web page. So thats what I did. So I want to know how to get it on the internet so other ppl can look at it. I don't want to have to redo all the stuff I did.

2007-09-09 11:40:46 · 4 answers · asked by laura222 1