Computer Networking - September 2007

Please say in details.

2007-09-07 08:42:46 · 11 answers · asked by kfuadashraf 1

I was just trying to figure out if there was a way to remote into my desktop pc from work. (My home is about 20 miles away from my job). I can remote into my home pc using my laptop fine (using Remote Desktop Connection and typing in my computer name/ip address), but I just want to know if it's possible to do it from such a long distance, and if so, how? Thanks for all inputs.

2007-09-07 07:24:02 · 5 answers · asked by Rico87 4

2007-09-07 06:43:42 · 5 answers · asked by umarasy 1

I'm thinking of buying a wireless router when I get set up in my new apartment, but I don't know what the minimum internet connection speed has to be in order for it to work. Would 256Kbps be enough? Do I need a higher speed?

2007-09-07 06:25:30 · 8 answers · asked by Anonymous

The router is a Belkin Wireless G Plus.

I want to connect a laptop running Vista and wireless-enable PC running XP.

2007-09-07 05:35:10 · 9 answers · asked by bruce666 3

TalkTalk, so big yet so rubbish. Anyone else tired of poor connections and even poorer customer services in Mumbai?

2007-09-07 04:02:35 · 6 answers · asked by A and L D 3

I want to buy a laptop and I have a desktop that is connected to broadband with and ethernet cord. I want to have the laptop use the same internet wirlessly. Is there anything I should look to buy when purchasing the laptop? I know I need a router, or do I? What is a network card? Do both computers have to have one in order for the wireless connection to work? I would really appreciate an answer put in the simplest of terms. I am very confused. Thank you

2007-09-07 02:04:03 · 5 answers · asked by Anonymous

hub is connected to my pc , with 2 additional laptops wirelessly , i wish to remove one from the network - can some advise me how to do it please??

2007-09-07 01:03:39 · 8 answers · asked by lilmisstrouble 2

2007-09-07 01:00:29 · 1 answers · asked by Ross 1

how do u get back to previos desktop on yahoo

2007-09-07 00:43:42 · 1 answers · asked by carol p 1

I live in Hull, and want to get broadband, but the package offered by Kingston Communications doesn't appeal and is expensive compared to others. Kingston Communications say they don't run a monopoly , but people I have spoken to say you can only get Kingston Communications broadband, because other broadband suppliers say they don't cover the Hull area. Is this correct.

2007-09-07 00:16:31 · 8 answers · asked by Joe N 1

I know there is a site to do that. But I forget what is it.

I remember that the homepage link must be "index_.htm", for some reason.

2007-09-06 23:29:13 · 4 answers · asked by ? 5

2007-09-06 15:22:24 · 13 answers · asked by CT Boy 1

Someone in my appartment block is stealing my internet - I cannot log into my router in order to set a password for wireless - I have the IP address; however the password does not work. If this has been reset - is there any way that I can restore factory settings?

Many thanks.

2007-09-06 11:02:26 · 4 answers · asked by Trixxie 3

it's a d-link dl-784 11a/11g 108mbps router (if that makes a diff)
I went to the 192.168.0.1 thing, entered the pw and username and found the place where it shows the channel... it's a dropdown menu but only has one channel (6) and I can't change it. It keeps d/c there must be something interfering... does anyone know why it only shows one channel? How do I change the channel?

2007-09-06 10:09:56 · 3 answers · asked by steve08080808 2

So, just bought myself a laptop, and decided I would convert on over to having a wireless network to use it around the house.

Bought a Linksys Wireless-G (WRT54G)...

Here's the deal...

Plug in everything the same exact way, run their stupid setup, and it asks me if everything is connected correctly.

So, I try connecting through the router ip instead of doing the setup, 192.168.1.1 - and get nothing...

Tried running it dynamically (since I run static) and repairing the network, and no such luck.

I'm aware that my old router's ip is 10.10.10.10, and the new router I'm trying to get to is 192.168.1.1 by default.

If you traceroute to my DSL, you get:
1 * * * Request timed out.
2 3 ms 3 ms 3 ms 192.168.1.1

Which says my DSL is NAT enabled.... using two NAT devices, the DSL is configured to be able to "share' the internet out of the box, so it is on 192.168.1.1 as well.

I'm not sure why it isn't working.

2007-09-06 09:43:03 · 2 answers · asked by Logic 3

2007-09-06 08:42:56 · 5 answers · asked by Anonymous

I have a Virgin Media cable connection that has been providing a broadband connection to my home network of 6 PCs. I have recently added a BT ADSL connection that also could provide the broadband connection via a BT Home Hub. I would like to use both WAN connections and load balance them.
A number of designs have been proposed, but all require either detailed configuration of the routing tables (under Windows XP) on each PC or configuration of teh tables on each of the routers (Belkin and Home Hub).
A dual WAN router has also been suggested. It is not clear to me how this would be configured. Do I take a LAN connection of the Belkin router to the WAN port on the Dual Wan router? Will this also work with the Home Hub? I don't want to use the WiFi capabilities available on each of the existing routers.

2007-09-06 08:33:58 · 3 answers · asked by Anonymous

I'm looking to use it mostly for online gaming. Not sure which one is better for what I want to use it for.

2007-09-06 07:51:36 · 6 answers · asked by dharvey22 1

I`ve just done a speed test and the results came back as follows

4008kbits downloaded in 5.109 secs.
could someone please tell me what this is in English please.

2007-09-06 07:28:48 · 5 answers · asked by Gary Crant 7

2007-09-06 04:42:03 · 1 answers · asked by Amanti 1

It signs off and then signs back on all on its own like its supposed to. It seems to only do it when I am not sitting at the computer and its gone idle.

How do I make it stop?

I dont think its my connection.. although it IS roadrunner and I do live in the boonies, so its not impossible I suppose.

2007-09-06 03:53:43 · 3 answers · asked by amosunknown 7

i want to build a linux server which provide service such as web hosting, ftp, email account. Any one here can help me with step step process of building a linux server in ubuntu. Any good links and book titles. Pls guide me.Thank you :)

2007-09-06 02:18:28 · 2 answers · asked by john 1

How much do they cost you per month? Can they support gaming? Do they come with phone plans or can you do them seperately?

2007-09-06 00:07:07 · 3 answers · asked by Joe Schmoe 2

My computer says "Limited or no Connectivity " every time when Im trying to connect to the internet trough my router .Then i tried to connect manually by chaging the Ping ,DNS and the Gateway...etc of my wireless connection,then its connecting but cant access the Internet yet .I tried everything ,i also formatted my computer but its not working
i tried from Win XP SP 2 Proffessional edition
Win XP SP 2 Home edition
but the problem still remains .
Plz some one help me.Thanks

2007-09-06 00:05:30 · 9 answers · asked by Mudith 4

I want to creat a VPN connection between my pc and one of my friends pc. We both use broadband internet and windows xp pro sp 2. I guess one of us have to be host and another will be client. I don't know anything about the process. Can anyone help me with details? (even how to find ip for vpn !). I want to do it by using windows... but if there is any good software...let me know plz. Another ques: is it possible to play multiplayer games via a VPN network?
THANKS.

2007-09-05 23:20:59 · 6 answers · asked by akib_ahmed 1

Hi here it the thing
I have ADSL internet connection and im sharing it with someone else laptop ... ( with wireless)

i have no problem with sharing it ... i just want to limit the bandwith so he cant use all of my bandwith and download all day ... how can i limit the bandwith ??

2007-09-05 20:49:09 · 2 answers · asked by yashar m 1

I have a LAN of 213 PCs. There are following server machines:

1. MS Windows 2003 Server Standard Ed.
2. MS ISA Server 2004

2007-09-05 20:41:02 · 1 answers · asked by A1OPUS 1

So I can share files with other computer over internet. Not a home network over router.
Using IP address I suppose.
Any way to do this with out domain?

2007-09-05 16:44:56 · 4 answers · asked by Luby 5

I don't have desktop just a couple of laptops and I want to set it up so that I can share files and printer. BTW one is on Vista and the other is XP....an maybe a Mac notebook sometimes.....

2007-09-05 15:39:24 · 5 answers · asked by Anonymous