Computer Networking - June 2007

uhhhhhhhh just answer the question

2007-06-03 16:04:45 · 5 answers · asked by caleb 3

I bought a so called "wireless" router today, and I shelled out close to 70 bucks for it only to come home and find out that in order to go wireless I have to shell out an additionally 30 or so dollars to buy a usb notebook card thingy to get my laptop to be " wireless' on the box it says 400 feet of wireless access...more like 4 ft in fact this stupid contraption has actually given me more wires to mess with and an even bigger head ache...I called the company and complained but the guy on the phone I could barely understand, and when I could understand he was a dick face to me, I think he said I had to but a usb thingy in order for my notebook to be wireless... my point is that the company is falsly advertising, if anyone else bought a wireless g router from myessentails, tell me if this fact pissed you off too...or if you just bought a router that was supposable "wireless" and you had to buy more ****....tell me!!

2007-06-03 15:35:55 · 8 answers · asked by abbybloom1 2

Here is what happened:

A couple years back my dad set up our wireless network. A few weeks ago two of us in the family purchased new laptops and now we don't know the password.

So now I am trying to make a new network. I got my computer plugged in it recognizes a router and the internet with wires. I am trying to now create the wirless part in windows vista it is telling me that I need to manually configure the router. From there it takes me to the IP website where it pops up for a password. I found on the internet that for my router a linksys it says type in the Username and password as "admin". However the IP thingy is not taking that and won't allow me to create the new network.

Please Help. I am completely computer illiterate and I need my internet!

2007-06-03 15:20:16 · 7 answers · asked by Bernice Fitzgerald 2

I want to share media on my computer with my PS3. I have been told that I need to go to Windows Media Player> Tools> Options>Library>Configure Sharing>Yes. However, when I choose yes it won't give accept it. It loads for several seconds, and then acts as though I never clicked OK. What would trigger this responce and how might I fix it?

2007-06-03 14:38:11 · 1 answers · asked by Blakerboy777 1

Hello all, I'm new in computer networking. Due the assignment we need to pass up a report. I not sure how to explaine it, who can help me ? Beside this, I need to know that hardware and software I need it in the computer as well.
Thank you.

2007-06-03 13:45:20 · 2 answers · asked by Migrant 1

Is there anything on or less than $15.00 /month?

2007-06-03 13:19:59 · 5 answers · asked by Anonymous

http://youtube.com/watch?v=aK65Sy_POXk please send it

2007-06-03 12:33:12 · 1 answers · asked by chris s 2

Well the other day I rearanged my rooms layout and left my router unpluged for a few hours and since I reconected it it has been going slower than normal and timing out, both wifi and my normal conection.

Its just slightly slower than normal but will time out every few mins

also I reset the router and changed all the security settings on my router.

What can it be?

2007-06-03 12:18:45 · 2 answers · asked by Jack Shmit 2

If I purchase a laptop, I was wondering how far I could travel outside of my house...away from my router before I lost connection.

2007-06-03 12:04:01 · 5 answers · asked by Anonymous

i have a netgear router directly connected is my two onsoles and a pc (i only use 1 at a time) then wirelessly connected a have a pc but whenever that is on my console get serious lag that makes me disconnect i then i have to wait for the modem to restart which takes like 4 mins

which router should i be using whats the best money can buy for gaming.....money is no object ( oh and i have 10mpeg speed)

2007-06-03 11:56:29 · 2 answers · asked by Anonymous

2007-06-03 11:53:40 · 2 answers · asked by veeleah 2

ok, so flashed my WRT54GL to dd-wrt a while back and now I'd like to block specific IP's and ranges of IP's. how do??

2007-06-03 11:46:56 · 3 answers · asked by Dashes 6

I've got a netgear wireless home router where my mac mini is connected directly to my modem and a Powerbook connected via Airport. Until today, everything was fine, but all of a sudden, my signal strength on my powerbook went down to near-zero. I'd like to make sure someone isn't stealing my signal, so how do I encrypt or protect my router signal?

2007-06-03 10:55:45 · 4 answers · asked by Smash Hansen 2

I need to find an online retailer that sells good cat5 cable, rj45 ends (male and female). Also, the required tools would be nice (crimpers and punch down). Thanks

2007-06-03 10:23:10 · 2 answers · asked by justinlc2002 1

I am creating a forum hosting website, which will allow members to register for FREE ipb boards etc... however when trying to set it up via my database, it doesn't work :(

I get the following error:

Can't connect to local MySQL server through socket '/tmp/mysql.sock' (46)

I get this when using "localhost" as the "SQL host"... I have been advised to ask for my FQDN for my site (http://theglobalforums.com) {MUST BE WITHOUT THE WWW. AS THIS LEADS TO ANOTHER SITE}

Can you help?!

2007-06-03 09:58:58 · 3 answers · asked by jofnn 1

Hi I have a torrent with over a hundred seeds and leachers with many peers but the problem is no matter what you do it still downloading slow. Like 0.3k I am using dialup internet.

But Imy webpages load fast and I download other things fast as well.

But I am using u torrent

And my Upload is set to unlimited.
Should I set my upload to 2k?

I am using XP pro with no service pack and no firewall as far as I know.

2007-06-03 09:21:07 · 3 answers · asked by Anonymous

i just got an account so i can hav people look at pics at commnt them but i dont know how to add people plz help

2007-06-03 09:00:01 · 1 answers · asked by footballxfan 2

I have a Linksys (Cisco) WRT54G (802.11 B/G) Router hooked up to my cable modem.
I have another router (Compaq IPaq CP-2W 802.11B) in my bedroom that I would like to act as a bridge connecting to my main linksys router. It appears the Compaq IPaq Firmware doesn't support configuring it as a bridge. Is there any solution anyone aware that makes this possible? Thx in advance.

2007-06-03 07:59:33 · 2 answers · asked by LedZep 1

can some one help me with this coursework
i need to describe the available netware directory trustee rights

2007-06-03 07:59:28 · 1 answers · asked by paulrose100 1

I am looking at their wireless router but still can't find if it is? I need it to bring in Europe

2007-06-03 07:50:55 · 2 answers · asked by Yannis P 2

I'm a novice at computers so can you make it as simply as you can please. Thank you

2007-06-03 07:47:01 · 3 answers · asked by ???????????? 2

I used to use Limewire a lot but now that I've got a different wireless network I can't. Its not something I can alter with the network either as its free and I should be grateful for what I am getting.

2007-06-03 07:06:05 · 1 answers · asked by Wulfruna 3

2007-06-03 06:45:20 · 2 answers · asked by XyZ 1

My k lite pro only connects to the one network on my laptop and it doesnt really bring up any downloads with that network. I have windows vista on my laptop and xp on my desktop and i dont have that problem with my desktop does anyone know how to fix this?

2007-06-03 06:34:12 · 1 answers · asked by Anonymous

I have 2 linksys wireless routers ( wrt54gx2 and wireless N routers.) The wireless N router is connected upstairs to the cable modem. I want to connect the other router to the network wirelessly downstairs so that I can extend the wireless coverage in the house.

2007-06-03 04:56:12 · 8 answers · asked by S A 3

I don't have the CDRom for the wireless adapter...but my computer still has the program on there...it just needs to be enabled. Its a Linksys Wireless Adapter.

2007-06-03 04:26:00 · 3 answers · asked by cashirley24 1

my pc goes online but will not view web pages

2007-06-03 03:58:19 · 5 answers · asked by Anonymous

i want to use fast speed internet for my desktop e-machine pc without using broadband like charter can you go wireless using sattellites or whatever? Can't wait to go wireless!!!!!

2007-06-03 03:44:34 · 6 answers · asked by milvaperkins 1

I have wireless internet and it says i have a connect but the internet will not come up. I have unpluged everything I know to and it still will not come up. What are some other things I can do?

2007-06-03 03:21:59 · 4 answers · asked by sylvia r 1

2007-06-03 03:09:59 · 2 answers · asked by firtha06 1