English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Motorcycles - September 2007

[Selected]: All categories Cars & Transportation Motorcycles

It's a Keihin carb. It now has a 45 main and a 155 slow. I need to know what the 1997 Suzuki RM 250 2 stroke comes with stock. I have a service manual on the way, but I need this info now. And I cant call a bike shop cause it's labor day and they are closed so only real answers please. Thank you.

2007-09-03 08:05:57 · 2 answers · asked by highrange101 2

I have a 06 raptor 350 and recently i added a jet kit and a pipe. Since then my carb has been sounding like it is backfiring. it only does it when it is idling and at low speed cruising. It is jetted like it said and the fuel mixture screw is 3 turns out like the instructions say. I've cleaned it out and put fresh gas back in and Changed the spark plug but still the problem persist, What is causing this?

2007-09-03 07:39:30 · 7 answers · asked by SPEEDY 4

get their bike so clean what do they use apart from elbow grease

2007-09-03 06:57:11 · 11 answers · asked by sparky 1

I'm looking for a good site to buy a motorcycle jacket. What site have you used or do you recommend?

2007-09-03 05:58:48 · 15 answers · asked by Erin go Bragh 3

I have a Sonic Scooter by the Scooter store and need batteries

2007-09-03 05:12:52 · 4 answers · asked by Glenna M C 1

Hi,
I just won this on ebay: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300145400172

I have searched for information on it, but can't find anything!

Just wanted to double check the bore + ratio of this brake lever.

As it says in the listing, it is stamped with 3A30-16

2007-09-03 05:10:34 · 1 answers · asked by Anonymous

I have a yamaha r6 and every morning when I go to ride it, it will not start. I charge the battery for about 20 minutes and the bike is ready to go. When I plug the battery into the charger it shows that the battery is at about 5o percent , after the 20 minutes the reader says 100 I take it out to ride and then in the morning it does not want to start. The battery is only 6 months old. Bot during those 6 months that I had the bike it was in he shop getting frame work because it fell. What could be the problem?

2007-09-03 03:37:43 · 15 answers · asked by Anonymous

2007-09-03 03:27:07 · 16 answers · asked by nglvoltz 1

The motorbike test is currently being revised (again) and we will see riders having to pick up a couple of new skills in order to earn their licence. If you raise the issue of the test with a trainer, many of them tend to feel that the test is being made so hard that it is close to - if not already - deterring riders. Yes, (car) driving standards are not what they should be - particularly with respect to motorbike awareness - and good training saves rider's lives, but even with that in mind, is the test too hard?

2007-09-03 02:03:29 · 11 answers · asked by politicsguy 5

When I ride bikes with my so called friends they always sponge my money from me, like when I stop for gas they use the same pump and fill up their bikes and I end up paying for everybodys gas, and when we stop to eat I always end up paying the bill for everybody, just the other day we stopped at this ice cream stand cause one guy was thirsty, and all he wanted was a iced tea, so everybdy else grabbed an iced tea, so i figured iced tea wasnt that much, so being a nice I guy I elected to pay for everybodys drink, then after that they all ordered burgers, and ice cream and fries, and I ended up paying $40 for everybody and they didn't eat all the food, they complained it wasnt good enough and thru it against the wall of the ice cream stand.

2007-09-03 01:45:46 · 12 answers · asked by Anonymous

When did motorbikes start installing catalysts?
And also why is it considered that Fuel injection is healthier for the enviroment instead of Carbyretor?

Looking forward to your answers.

2007-09-03 01:39:04 · 2 answers · asked by nikker1985 2

just bought the bike and it uses a little oil, had a bike when i was a kid, but can't remember what oil to put in them. thanks!!!

2007-09-03 01:28:14 · 2 answers · asked by jennifer e 1

2007-09-02 21:42:33 · 2 answers · asked by Anonymous

okay now i got your attention. i just want to ask one ? i have nothing against you guys or anything like that, but:

when your bike says "only 93+ octane" do you stick to that?

for the ones who don't do you have any problems. i know BMW and other 'luxury' car brands reccomend this, but i know many owners who dont without problems.

2007-09-02 17:44:38 · 11 answers · asked by Kenneth M 3

I really like the CBR125 and 250, and the aprilia RS125. Everbody says they are teenager and girl bikes.

2007-09-02 17:03:28 · 6 answers · asked by Anonymous

I Heard The Gas Pocket Bikes Are Illegal, But Are The Electric Ones? Or Are They All....Cause At The EX The Were Giving Them Out?

2007-09-02 16:57:14 · 7 answers · asked by Anonymous

I have the piston at TDC but I see no obvious marks as to how to place the cam in position. Is there a way to know this or is it just a guessing game. there is 1 large hole and 2 small holes 180 from each other. There is a symbol on the cam sprocket but I don't think that is the mark to line it up. Any help would be appreciated.

2007-09-02 16:25:16 · 4 answers · asked by wyoung124 1

ride with her to make sure everything is okay & she is safe? I just rode home from a rally & the BF left me in the rain. I was going slow due to having trouble seeing, glasses getting full of rain, etc. so he went ahead without me. Don't most riders look out for each other?

2007-09-02 16:07:07 · 22 answers · asked by COblonde 3

2007-09-02 15:39:32 · 7 answers · asked by shooter_18831 1

just started today. i was runing her pretty hard today and its a fairly new engine, (3500 miles) i am the first owner and this is my first bike ninja 250. what could this be. am planning on taking her to shop on tue if it continues, but want a rough idea.

2007-09-02 14:45:00 · 8 answers · asked by Kenneth M 3

I just bought an 07 Honda 919 and after about 5 miles of driving (it's brand new), I heard some squeal coming from the front end. The back end doesn't make (as much?) noise, but it sounds like a rock in the brakes. I don't see any grooves on the rotors, because I decided to continue riding (bike has 130 miles on it now) and see if i could get rid of the rock through repeated braking. Whatever the deal is, it's a squeal that appears just as I pull on the front brake....after a moment on the brake, the noise stops, but there's also a little noise as I ride, which makes me think maybe the calipers are just too close to the rotors? I REALLY hate the shop that I bought the bike from, but they're slated to do a 600 mile first tune on it in a week and I was thinking of getting it looked at then. Any ideas? Am I being a dumbass? (i figured if i hosed the rotors or pads, i could play dumb and get them to install new ones free :)
Thanks!
Oh, no flames about Hondas. Don't wanna hear it.

2007-09-02 13:52:26 · 5 answers · asked by roninbambi 1

HD has a online membership for 45 bucks per year - has anyone joined, and is it worth the 45 dollars? I just bought a 2000 ultra.



http://www.harley-davidson.com/wcm/Content/Pages/HOG/HOG.jsp?locale=en_US&bmLocale=en_US

2007-09-02 13:15:47 · 12 answers · asked by Robert W 2

i replaced the starter clutch and it fired right up except the next day now i have no fire at all.

2007-09-02 11:26:43 · 1 answers · asked by Anonymous

Why do a lot of people call any two wheel bike with a motor a moped??? I thought the definition of a moped was a two wheel bike with a motor that you had to peddle thus the name mo for motor and ped for peddle

2007-09-02 10:59:51 · 7 answers · asked by Marcia 3

I am trying to put offroad lights and a GPS on my bike and I cant get a straight answer from even the dealership on how many watts/volts/amps coming out of my factory charging system. How big can I go w/o popping something that I might need later? Any help appreciated!

2007-09-02 10:58:09 · 1 answers · asked by mikeybelyn 1

Alright, I have a ninja 250. ive determined that my problem is a bent shift fork because i cant shift into second and there is nothing blocking the shifter arm. just looking to see how much to cost would be.

2007-09-02 10:36:03 · 5 answers · asked by Anonymous

fedest.com, questions and answers