Maintenance & Repairs - March 2007

how do i put a streeing colum on a 1982 GMC S15 for my truck? I need to get this finish before get to college. A.S.A.P
PLZ if any one knows plz anwser me. :(

2007-03-28 12:10:21 · 2 answers · asked by jedilord2007 1

There's a guy selling one for $100, haven't seen it yet, but I'd like to know if it's worth looking at.

2007-03-28 11:42:22 · 8 answers · asked by Jason M 3

where can i find a list of the cars on wich can fit:
235/40/18 tires??

2007-03-28 11:40:38 · 3 answers · asked by XPX 1

1989 Ford F150 How do i clear the codes to make the check engine light go out. I want to start fresh to make certain the codes I get when/if the light comes back on are current codes. Not trying to avoid repairs just want to make sure I am not seeing codes old codes.

2007-03-28 11:39:11 · 4 answers · asked by ncnative96 1

This vehicle has the chip type key, & you can actually remove the key from the vehicle, & it will still stay running. I have replaced the actual switch under the column, but that didn't change anything.
I've exhausted my resources for knowledge, any help would be appreciated. Thank you

2007-03-28 11:33:19 · 2 answers · asked by sprintcarguy4life 1

2007-03-28 11:23:58 · 4 answers · asked by dieseldude93 1

2007-03-28 11:19:50 · 9 answers · asked by Anonymous

Is it still in the undercarriage below the drivers side seat?

2007-03-28 11:14:25 · 2 answers · asked by kildarner 2

My 1991 Mazda Miata was over-heating but not red-lining for quite awhile. Come to find out the thermostat was installed backwards. will installing it properly correct the problem? ( I'm in another state so haven't been able to test it out.)

2007-03-28 11:05:04 · 4 answers · asked by Debra O 2

I am thinking about getting a lund hood scoop for my car but I was wondering if the 3m tape that comes with it good enough to hold it on and what is the best way to paint it with automotive spray paint and clear coat.

2007-03-28 10:55:32 · 2 answers · asked by Anonymous

Ok I have a 06 ford focus and the other day i went over the railroad lil too fast. I was in a turn when i was going up the railroad tracks. I am so mad at myself now!!But now i hear this clicking noise when i turn right or go over bumps.Can anyone tell me what this maybe I hope its not the axel I love my car!!:(

2007-03-28 10:54:39 · 3 answers · asked by pebblesqt 3

Hi, I recently put a th350 in my car (my other tranny was a 200r4 with a 4.11 ring and pinion), I need to know what # of ring and pinion is the best for this combination, I had 28'' tall of tire in the back, if someone knows, please let me know, thanks...

2007-03-28 10:44:42 · 2 answers · asked by jrivas1970 1

I have a Ford Galaxy 1996, It starts shuddering when accelerating, when the clutch is fully up, when I dip the clutch it stops shuddering. Could this be the clutch or thrust bearings and roughly how much would this cost to repair? Appreciate any answers given.

2007-03-28 10:40:23 · 6 answers · asked by Anonymous

2007-03-28 10:28:25 · 12 answers · asked by wordup 1

Please describe thoroughly what to do in each of these situations.

1) A tire goes flat. Describe both a front and a rear flat since each is different.

2) You are going down a hill and your brakes don't work.

3) Your gas pedal sticks and your car goes faster and faster.

4) Your hood flies open, blocking your vision.

5) Your headlights suddenly go out.

6) You are moving in traffic and your engine stalls out.

7) A red dashboard light comes on or a buzzer starts.

8) A car comes at you head on in your travel lane.

9) You are blinded by someone's high beams.

10) At an intersection, another car crosses in front of you.

11) Your tires drop onto a low or unpaved shoulder.

12) You come to an unexpected curve in the road.

13) Your windsheild is suddenly covered by snow, rain, interior fog, or sun.

Thank you, I really appreciate it!

2007-03-28 10:25:39 · 3 answers · asked by Anonymous 4

2007-03-28 10:15:53 · 1 answers · asked by yuri f 1

2007-03-28 10:14:01 · 2 answers · asked by LLANTA 1

2007-03-28 10:06:39 · 6 answers · asked by cwitte13 1

The atv is a 2003. I ned to know how to adjust the valves aand what to adjust them to. Thank you.

2007-03-28 10:02:01 · 2 answers · asked by mjttp87 1

2007-03-28 09:54:39 · 13 answers · asked by Debbie L 3

i want to know will fliuds leak out alot or little bit when i go to remove my theromstat to repair it so i would know to put something under it and to be careful when i go to remove it anyone can asnwer whos knows thank you

2007-03-28 09:52:54 · 5 answers · asked by markla25 1

ok i drive a '93 Toyota Camry, the problem is that the brakes become too long when you're stopped and pressing down on them
for exmple at traffic lights, i come to a stop and then the pedal softens up until i have it floored and it's barely stopping the car
but it was even worse after school today, it wouldn't even brake unless i stomped it down all the way-and it would take a lot to bring it to a stop.....my dad drove it home and said it was better
i checked the brake fluid and it was nearly full-just refilled it a bit.....also the car was stopped for about a week b/c i got rear ended-and i did notice the change when leaving-but it wasn't as bad as it is now....and i'm sure they didn't mess with it since all the work was in the rear
any ideas? thx

2007-03-28 09:51:01 · 10 answers · asked by Carlos 7

I have a 1984 ford f-150 302 5,0 liter 2bbl and the engine knock what could cause it and how could i fix it??

2007-03-28 09:43:03 · 5 answers · asked by Rolls-Royce Man 2

2007-03-28 09:35:32 · 6 answers · asked by Kenny J 2

I have a 1995 Pontiac Sunfire in great condition except for one thing. The breaks seem to go out when I'm makin sharp left turns. For example, when I am makin a sharp left to get into a parking space. This is the only time it happens. It makes a clickin noise and then I feel the brake move a little under my foot. Then when I press it, nothing happens. However, if I pump it once it goes back to normal. It doesn't happen every time I turn left. But when I turn left.

2007-03-28 09:30:59 · 7 answers · asked by Kalliopeie 2

runs fine but gauges dont work

2007-03-28 09:23:51 · 1 answers · asked by jeramy m 1

1998 Nissan Altima

2007-03-28 09:23:23 · 3 answers · asked by Anonymous

how old do you gotta be to get a car put in your name

2007-03-28 09:11:36 · 8 answers · asked by man man 1

Hi Everyone,
I'm a newbie at car maintenance, and need your help....
Today i just noticed a small puddle of fluid on the garage floor, under the car it looks like oil ... (front, drivers side)
look under the car and can see nothing untoward, no corrosion etc.
I have to drive to the airport -2 hours drive-, and want to know what's wrong.
PS:I drove like two hours 3 days before. It is a VW 98.
Thanks!

2007-03-28 08:57:51 · 5 answers · asked by Tomato 3

The main car lock on the drivers side to control all the other doors won't work. I tried the passenger side as well but that doesn't work other. My clock is gone. My windshield wiper does work on the first click, but it does on every other. And my radio resets itself everytime I turn on the car. This is completely random, waking up to this since when I left it last night it was perfectly fine. Does this have to do something with a fuse or wiring?

2007-03-28 08:56:51 · 3 answers · asked by Thara Ros 2