Maintenance & Repairs - January 2007

The vehicle is a Mitzubishi Express van and the last oil change was done 4 months ago. I have a small leak and it needs a top up, but I don't want to purchase more synthetic oil until i get the leak repaired, due to the cost factor.

2007-01-29 22:02:00 · 4 answers · asked by Anonymous

my ka had a rear end crash creasing boot floor ,door not shut same ,bonnet hangs over light slightly,

2007-01-29 21:18:47 · 9 answers · asked by Anonymous

can u damage your engine by adding a cold air intake? is it easy for water to get into, like when it rains.
if you dont drive through water when it rain, can you still suck up water into your engine

2007-01-29 19:22:41 · 2 answers · asked by raynbrittney 1

Ok so the problem on my car is when my transmition changes gear when driving, my car doesnt accelerate anymore until i start pressing the gas peddle very hard. why is that?

I have a civic 92 lx automatic, D15b7 engine 1.5L. 4 door.

2007-01-29 18:58:46 · 2 answers · asked by franckoboy 3

so today i just installed an intake on my 95 honda del sol automatic. everything fits and everything is sealed. but it constantly makes a vacuum sounding noise. my friend has an intake on his car and it doesnt make that noise unless he steps on the gas. why is mine?

2007-01-29 18:39:10 · 5 answers · asked by Anonymous

that people on this section dont have a clue about cars but aanswer any way?
take this one.
what water should i put in my rad
90 percent off people answerd tap water?
any mechanic nows its distiled water, mixed with antifreeze!
no wonder there head gaskets go?
oh & yes i am a mechanic 20 years ok

2007-01-29 18:09:50 · 15 answers · asked by witheringtonkeith 5

I have an 88' Thunderbird, and all the fuses are good, and all of the electrical connections are live. I've tried putting in a different instrument cluster/panel, and the temperature and fuel gauges still will not work, even though I've tested them out of the vehicle with a 12volt power supply, and the gauges move. (The instrument panel is analog gauges and digital speedometer.) The speedometer, indicator lights, and illumination lights all work. Could there be any fusable links or relays that a Chilton's manual would not indicate?
(Knowledgeable answers only please!)

2007-01-29 17:47:54 · 4 answers · asked by Little Jeannie 4

2007-01-29 17:25:51 · 1 answers · asked by toilet 1

When I put it in gear it wont move. I've added transmission fluid and still nothing, Do I need a new one, or a new car. Its a 1994 Chevy Lumina. I know its an old car but it has a good engine.

2007-01-29 17:25:35 · 8 answers · asked by mschrissy 2

I have a E-150 Conversion Van that vents out semi-warm heat (only for less than 1 minute), but shortly after, eventually starts too push cold air out of the vents. What could be the cause this problem?

2007-01-29 17:08:54 · 4 answers · asked by Very_cold 1

well the other day my car wouldn't keep charged, drained the battery fast, no stereo nothing. So I figured it had to be the alternator. Well after stressing all weekend, getting the cash to fix it, I started it up today and everything is working just fine. Even with the lights on. I wasn't tripping. Has anyone else ever had their car fix itself?

2007-01-29 16:55:03 · 10 answers · asked by giggleswsb 1

Could you do a complete engine swap and tranny swap from a 1993 3.1L Pontaic Grand Prix 4 speed autoto a 1989 2.8L Z24 Cavalier 3 speed auto?

2007-01-29 16:53:37 · 7 answers · asked by Josh 1

gas in my car, and when I took off it has a hard time shifting to another gear (automatic). It feels like its bouncing everytime I step on the gas...not like hydralics. Could it be my sensor? Thanks a bunch...! Its a Honda Civic

2007-01-29 16:30:46 · 5 answers · asked by Anonymous

I have a 1987 Subaru Justy; it's a terrific car that is mechanically sound and has tonnes of life left. Plus it's my baby and I plan on keeping it forever.

However, the rear seat has sun damage and the driver seat is cracked and worn from wear. Also the carpet near the pedals has worn through. It looks ugly and I have seat covers, but it doesn't look as good as having actual upholestry.

Where would I find seats for this car? I tried Ebay but there's none. Also tried dismantling yards, but this car is pretty rare and couldn't find any. Any websites you know of?

Also, once I find some, how hard is it for a "do-it-yourselfer" to take the old ones and bolt new ones in? It seems like it'd be just a number of bolts holding the seat and tracks to the floor.

2007-01-29 16:29:08 · 4 answers · asked by Roo 1

My tires are supposed to have 35 or 45 pounds of pressured and I checked them and they were down to 15 or so. Why?

2007-01-29 16:25:08 · 30 answers · asked by amanda 3

I have a '94 Jetta and am just getting used to driving stick. I find that when I shift into 3rd I am usually capable of 60km/h but at around 2800 RPMs. Is this OK or is it considered too high? I know that I should be shifting at around 3000 RPMs but I am wondering if keeping the engine at 2800 will cause any damage. Also, is there a distinct smell when the clutch is burning? The car in question is diesel and there seems to be a smell that lingers in it. I am wondering whether this is the diesel or the clutch. Thanks in advance.

2007-01-29 15:58:16 · 5 answers · asked by Kevin S 2

i want the look of HID(High Intensity Discharge) lights without having to purchase HID a blue or purple bulb color might also work.....ANY SUGGESTIONS APPRECIATED!!


Automotive

2007-01-29 15:43:40 · 5 answers · asked by superkspecial 1

i have replaced brake lines from the rear to the front it has new cylinders in rear,new shoes,drums are good, i have put 4 new master cylinders on it ,new booster.i have taken the abs off of it,it had the rear wheel abs. it has been bleed properly many times. the front brakes work great NEED HELP BAD been working on this off and on for 3 months all new parts are new not rebuilt, portioning valve has been replaced to. my email lonerider@insightbb.com help help

2007-01-29 15:32:44 · 3 answers · asked by lonerider 1

the lawn mower is the push kind and has 5 hp. is there a way to do this?

2007-01-29 15:09:27 · 4 answers · asked by triceratorps 1

Is it super, supreme, ectx. ?

2007-01-29 15:04:05 · 4 answers · asked by berto_salazar 1

Ive seen some liquid in auto supplies stores the name of the product i forget now but its suppose to stop miner leaks in the radiator, engine etc. do you think this product really works? or is there any other product that will buy me some time till i change the head?

2007-01-29 14:58:32 · 5 answers · asked by Anonymous

is it ok to use a compress gas duster to clean out the car's cd player? i dont want to make it worse since the cd player isnt reading any cds, even a cd cleaner disc. what do u suggest i use to clean out the dust if the disc wont do it??

2007-01-29 14:51:33 · 7 answers · asked by wcs1885 1

I just need to get a door moulding painted. I and not looking to pay more than 80 bucks for paint and labor. because that is just ridiculous.

2007-01-29 14:34:00 · 3 answers · asked by lilaznporkchopx@pacbell.net 2

ok, just so you're warned these two questions are way beyond basic and what everyone should know....however.....

1) What is the difference between oil and gasoline? I've heard these two terms used almost interchangeably.

2) What are gears like 2nd, 3rd, gear actually used for? I mean like in what exact instances would I need to go into 2nd gear, or 3rd gear?

2007-01-29 14:18:28 · 20 answers · asked by Anonymous

How much would it cost to replace a transmission pan on a Dodge Spirit '95. The transmission runs fine when it is full, but leaks out over a few weeks and has to be refilled with fluid. I don't want to rebuild the transmission, the car is too old to be worth that.

2007-01-29 14:16:34 · 9 answers · asked by Anonymous

I will be driving about 1250 mi, right now I know it needs an oil change and new brakes but what else are some good things to get checked on it. It is a 2001 Ford Taurus with about 200,000 mi on it.

2007-01-29 14:13:31 · 5 answers · asked by mom_of_twins28 1

im am trying to change bobcat hydraulic hoses on a 753 you would kinda need a pic so i can show you what im talking about.. it on the left side lower hydraulic arm. there are 2 hydraulic hoses and they drop back to the motor area. and i found a bolt to make them drop but cant seem to get a rinch to get the hoses off the rinch will not fit in the area.. do i need to take off the other hoses to get in there better ?? if you need a pic ill email it just ask!

2007-01-29 14:12:21 · 4 answers · asked by B-Rad! 1

2007-01-29 14:09:33 · 2 answers · asked by Anonymous

I've replaced the EGR valve before and the first mechanic said there was a water deposit inside that could be the cause. The service light came on again 5 months later saying the EGR was bad again. What could cause the water deposit? I know I have a leak in my valve cover gasket that leaks in my spark plug bay.

2007-01-29 13:56:18 · 1 answers · asked by balladof_fallen_angels 1

Hey guys,
I'm considering buying these rims for my 1991 acura legend, but I need some help! The rims I want have 2 dents on them.. heres a pic http://stlouis.craigslist.org/pts/269279363.html. Does anyone know if the dents will be a hazard problem while driving? Thanks in advance!

2007-01-29 13:55:14 · 4 answers · asked by jonathan p 2