English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Maintenance & Repairs - September 2006

[Selected]: All categories Cars & Transportation Maintenance & Repairs

my husband can't shift gears on our car, its stuck. how can he get it to shift gears? its a 93 mercury grand marquis.

2006-09-11 09:29:38 · 5 answers · asked by chrisee 1

Apart from a few leaky seals there are no obvious problems. A few months ago as I was driving into a parking lot after a 2 hour trip on the highway I heard a scapy/rubbing noise from the back end. I only noticed this noise as I was turning into the parking lot and it was at a very low speed (approx. 5mph). I didn't think anything of it and it was not there when I drove home later the same day (drove about 200 miles that day). I heard it a couple more times over the next couple of weeks and eventually decided to have it checked out. It occurs regularly now, but only after driving around for an hour or so and only when I am at low speeds turning (i.e. in a parking lot). I have had all the brakes replaced in the last 2 years and I have had the fluid changed in the rear diff. Last oil change the fluid in the diff looked ok. What could it be? Wheel bearing? Brake? Differential? It sounds like it comes from the wheel area and not from the middle where the differntial is.

2006-09-11 09:09:46 · 11 answers · asked by jeepdudecanada 1

The other day, when turning very tightly it made a popping sound. Now it does not react as if the hubs are locked but it is making a strange rattling sound in the front end. Any help would be appreciated.

2006-09-11 08:37:03 · 3 answers · asked by Anonymous

i have a 1989 corvette. every time i try to go over 100 it starts to shake how can i make it go faster and not shake that much. i really need help i have a race in a week

2006-09-11 08:33:33 · 6 answers · asked by *Louisiana*Chick* 2

my question is has anybody had any problems with the megane i am thinking of changing my car soon but not sure what to get next

2006-09-11 08:24:29 · 7 answers · asked by scott j 3

My '93 chevy 1500 need a new timing kit its real loose and i got no power. How would i change it and up my power. thx

2006-09-11 08:21:34 · 4 answers · asked by Pacman187 2

I'm doin a presentation on car care and I need to know how common are the coin-operated coin wash places (where you wash your car yourself) thorought US? I mean, are they hard to find or they are everywhere? Do you have such car wash where you live? Thanks

2006-09-11 08:08:48 · 5 answers · asked by mmd_774 2

The spark plugs on my 4 banger dodge colt w/ mitztbuishi engine were white around the electrode, what does that mean?

2006-09-11 07:35:16 · 5 answers · asked by Anonymous

the clutch system on late 80s early 90s volkswagen carevelle. just cant get it to work right

2006-09-11 07:24:24 · 13 answers · asked by species8472 6

Need welding done for sunroof on ford mustang. live in Los Angeles, Ca. Need aluminum welded.

2006-09-11 07:15:01 · 1 answers · asked by robver@sbcglobal.net 1

Changed Radiator hose in 1993 Mazda 626. Had to remove the Distributor to get at the hose. Now the timing is off, and the car won't start. Any help would be appreciated.

2006-09-11 07:14:08 · 7 answers · asked by Nikki 6

i have a 96 dodge neon with problems. i had the battery checked and also the alternator but something keeps draining my battery, when i get the battery charged it is good for a week. any ideas

2006-09-11 06:50:15 · 6 answers · asked by Anonymous

cars a 1993 ford escort 1392lxi thanx

2006-09-11 06:41:42 · 4 answers · asked by Anonymous

My 4 banger failed hydro carbon side of Emissions test, what can I do to pass?

2006-09-11 06:33:21 · 6 answers · asked by Anonymous

my car was running fine yesterday..but a few minutes ago it wouldn't start. The first time i tried to start it it sounded like it wanted to turn over..the second and third time i tried to start it..nothing..could it be the starter?it is a grand prix

2006-09-11 06:21:25 · 8 answers · asked by shorty82 5

I need to completly disconnect my car battery so i can reset the computer system in my car. I havn't done it for a long time so can't remember if there is anything i need to know. Something about using metal tools around a live battery doesn't seem right. Do i have to take one of the sides off first (posotive/negative) or does it not matter. Thanks for help in advance.

2006-09-11 05:56:07 · 7 answers · asked by Heythere1 1

2006-09-11 05:52:17 · 2 answers · asked by oscar l 1

I would like to clean the inside of my car windows because they have that weird haze built up on the inside of them, but my windows are tinted. My husband has told me not to use Windex on the interior side of the windows, as it will harm the tint. Vinegar was suggested, but I'm not too sure about using that either. If anyone knows if vinegar would be okay to use or has any suggestions as to the best way to clean the windows without damaging them, I would greatly appreciate it. Thanks! :)

2006-09-11 05:35:11 · 4 answers · asked by runninggirl23 2

made very few of these units and they are very exspensive.
would like to substitute regular booster and master cylinder
for the one with ABS

2006-09-11 05:30:41 · 4 answers · asked by john c 1

0

My oil pressure is fine under 2500 rpm and over 5500rpm, no pressure on the gauge between? I

2006-09-11 05:28:55 · 4 answers · asked by ROBERT F 1

will Prem Gas +104 octo boost hurt a 4 cyl 2.2L motor NONTURBO with AC?? please HELP ASAP

2006-09-11 05:26:09 · 5 answers · asked by davedebo198305 4

2006-09-11 05:18:54 · 9 answers · asked by Wendy B 1

i have a 93 pontiac bonneville that was running fine yesterday and today won't start. i replaced the battery which also rules out the alternater. the starter is only 2 years old max on the car. when i turn the key, it makes a normal starting noise for about half a second and then nothing. it doesn't even make it far enough for the starter to click or anything else that would keep it from turning over. what could go bad in less than 12 hours to make a normal running car suddenly not come close to being able to start..........and yes there's gas in it, bout 3/4ths of a tank.

2006-09-11 04:53:35 · 9 answers · asked by that somebody 1

I have a Right Hand Drive Honda Accord Clip, that is, I have everything forward the Shifter Assembly.

I also have a Full Left Hand Drive Honda Accord.

Both are the same engines and transmission.
The only difference is that one has the steering wheel on the opposite side.
Im looking for someone who has done this swap or have some knowledge in the procedure in switching over the way the car drives.
I only have a little knowledge in the parts...I know that the steering rod or linkage needs to be switched...I just want to know what else needs to be.
Again, I have ALL the parts from the Right Hand Drive car...even the steering wheel, peddles, and shifter.

Not looking for plain answers like "expensive" or "too much".

Up for grabs is Thumbs and Best answer.

2006-09-11 04:42:53 · 6 answers · asked by Anonymous

2006-09-11 04:34:19 · 6 answers · asked by Chris L 1

how do I remove my tail light on my 2005 caravan? There is no screws or access panel to replace the bulb. I pulled off the inside wall panel and didn't find screws or access in there.

2006-09-11 04:22:31 · 2 answers · asked by puzzled 1

not the mudflaps.
its long and thin and someone said its used to help with car sickness

2006-09-11 04:20:08 · 6 answers · asked by cdpheonixx 1

I don't know what the problem is with my car, but it got stuck in the mud and while it was in the mud it starting to sound different. When I start it has a louder sound. Could be the exaust, but it sounds like its coming from the front of the hood. When I hit the gas, it sounds like it's working harder, but it shifts fine. Does anyone know what the problem may be?

2006-09-11 04:07:06 · 3 answers · asked by james w 3

fedest.com, questions and answers