Home & Garden - 7 December 2007

2007-12-07 16:25:23 · 8 answers · asked by 610bigbird 1 in Other - Home & Garden

My friend recently stipped one the screws in his paintball gun while putting it back togethor. He now needs to remove the screw because there is a problem within the gun. We do not no how to remove the screw; would super glue and a screw driver work?

2007-12-07 15:47:49 · 7 answers · asked by ben r 2 in Maintenance & Repairs

I used Rug Dr. spot remover which has always been successful for me in the past but not this time.What will work without damaging fabric?

2007-12-07 15:38:15 · 3 answers · asked by BERT 6 in Cleaning & Laundry

I asked for help on this before but was told to replace the bulb. Well I took the light off the blower but can't find a way to get at the bulb. How the heck do I get at it? Oh it's a 81/2 hsp Yardman about 8 years old.

2007-12-07 14:44:11 · 1 answers · asked by Mrs. Fuzzy Bottoms 7 in Do It Yourself (DIY)

I asked for help on this before but was told to replace the bulb. Well I took the light off the blower but can't find a way to get at the bulb. How the heck do I get at it? Oh it's a 81/2 hsp Yardman about 8 years old.

2007-12-07 14:41:29 · 2 answers · asked by Mrs. Fuzzy Bottoms 7 in Maintenance & Repairs

2007-12-07 14:28:46 · 13 answers · asked by LIL' SHORTY!! 1 in Other - Home & Garden

Right before I noticed it doing this. There was one time that it did not come on at all. I went to the basement and just kinda moved the condensation pump(slid it a little) then the pump kicked on and right away the furnace came on. Any ideas?

2007-12-07 14:20:27 · 6 answers · asked by bucky 1 in Do It Yourself (DIY)

i want to make my leopard gecko a custom hut to go into his cage because the ones at the petstore never fit right and don't blend in with the rest of the decor. does anybody know how i should go about this? should I use clay, terra cotta, or plastics? after I choose a material that's pet friendly, how do I make the hut. thanks in advance. and a good plastics website i found is tapplastics.com if plastics are the way to go, because then i need to know what kind of plastic

2007-12-07 14:18:35 · 5 answers · asked by lamborghini518 3 in Do It Yourself (DIY)

What would cause the outlets in my garage to stop functioning, but the lights and garage door opener to be fine? I tried tripping the breaker, but that wasn't it! If something needs replaced, what is it and where would it be located? Thanks for your help!

2007-12-07 14:13:33 · 9 answers · asked by Katie K 2 in Maintenance & Repairs

I am curious how quickly mice reproduce and if I am looking at a few field mice that have made their way in or if I am looking at an infestation.

2007-12-07 14:08:45 · 2 answers · asked by Sean P 2 in Other - Home & Garden

Hello, I live in the Lower Mainland of BC and Im just wondering if anyone knows where I can buy a small plate of glass that is about 5 inches by 7 inches or so.

Thanks

2007-12-07 13:43:27 · 5 answers · asked by Anonymous in Do It Yourself (DIY)

can anyone tell me how the hell ur suppose to drain the vortex if its buried underground? or the gravity fed filter? and can anyone reccommed me a cheap pond skimmer for a liner?
like maybe $50- ? and are external pond pumps lound im lookin at the seqence 750

2007-12-07 13:35:55 · 2 answers · asked by Anonymous in Garden & Landscape

Okay, I have some 4"PVC to 2"PVC reducer, a 4" PVC tank/endcap, and a ball valve. It is going to be under a lot of pressure (70-100PSI), this is my first time bonding PVC so what should i do in steps? I heard PVC Primer then Cement it together. Anything else?

2007-12-07 13:28:06 · 10 answers · asked by nerfpallys 3 in Maintenance & Repairs

I accidentaly put fabric softner in the same thing as the detergent goes. will it hurt my clothes?

2007-12-07 13:17:47 · 9 answers · asked by Macy 1 in Cleaning & Laundry

Ok I plan on using 3/4" foamboard to insulate two block walls in a bedroom.
1) How do i attach the foamboard to the walls?
2) I plan on using 3/8" drywall to finish the rooms is this a
good idea?
3) Should there be an air gap between the block-foamboard-
drywall?
4) Should I put a plastic barrier between the foamboard and
drywall?
5) Should i do anything to the block wall before adding the foamboard?? like paint?
Thank you all in advance for your responses.

2007-12-07 12:54:21 · 8 answers · asked by salttynuts 1 in Maintenance & Repairs

Hey Guys I have a funny mouse problem but any advice might help. I have seen a single mouse running through my house over the last week. I ut out Mouse poison and he ate it all and came back for seconds, and thirds. Then I put out sticky trapsand found them knocked out of the way. Then I put out mouse traps and then fancy mouse traps. He stole the food from them about 8 times.

I THINK I HAVE A SUPER MOUSE !!!!!!!!!!!!!!
AAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHH!!!!!!!
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

2007-12-07 12:45:05 · 22 answers · asked by Caffeine Jesus 3 in Do It Yourself (DIY)

2007-12-07 12:07:10 · 4 answers · asked by coastie_90 1 in Garden & Landscape

i used tide with downy, and downy dryer sheets... and for some reason my clothes NEVER come out smelling like downy. i don't leave my laundry sitting wet for very long at all... and i don't think i over stuff the dryer. i was wondering if there was some magic trick or something to get the dryer sheets to work. if anyone can answer this for me id appreciate it!! thanks =0)

2007-12-07 12:03:42 · 3 answers · asked by Anonymous in Cleaning & Laundry

shopping,food,go out,party,car,house

2007-12-07 12:00:34 · 18 answers · asked by Anonymous in Do It Yourself (DIY)

we just want our towels to smell fresh and clean everytime we use them!!!!!!!

2007-12-07 11:49:11 · 10 answers · asked by Anonymous in Cleaning & Laundry

well, I managed to spill a whole bottle of pepto bismol on my carpet, and it's stained.. I've tried cleaning it with a carpet cleaner that I rented, it won't come out. what can I do?
thank you so much..

2007-12-07 11:42:19 · 3 answers · asked by on_the_move4ever 3 in Cleaning & Laundry

I'm not sure what material it is, I guess just normal..

2007-12-07 11:37:01 · 1 answers · asked by Southern Sweetheart 3 in Cleaning & Laundry

Its the kind of vacuum that has a canister, not a bag. Can I even use that to blow up an air mattress and if I can how do I do it?

2007-12-07 11:27:08 · 3 answers · asked by jrseeg1rl 2 in Cleaning & Laundry

2007-12-07 11:21:51 · 6 answers · asked by BT 1 in Do It Yourself (DIY)

which would be more cost efficient?

2007-12-07 11:19:15 · 4 answers · asked by Due 2-23-2010!! 4 in Other - Home & Garden

the bottle fell in my jeans and i put my jeans right away in the dryer they came out with some little white spots
my questions ...is if i wash my jeans...does the bleach is going to bleach out my jeans when i wash them?
does the bleach stays on even if it dried already?
thanks all answer accepted

2007-12-07 11:05:26 · 9 answers · asked by Anonymous in Cleaning & Laundry

2007-12-07 10:56:40 · 12 answers · asked by ja77 7 in Cleaning & Laundry

hey guys i have a problem..and i was wondering if you guys can help.....

i can't get this stain off my jeans..and i washed it already..and i have no idea what its is...is there any other way i can get the stain off...[thats not to expensive] its a yellow looking stain... i've already washed it..and still no luck
any suggestions?

i will choose the best answer ;)
thanks

2007-12-07 10:49:18 · 2 answers · asked by private 1 in Cleaning & Laundry

2007-12-07 10:45:04 · 2 answers · asked by Marymak1 1 in Cleaning & Laundry

2007-12-07 10:21:39 · 5 answers · asked by Mike b 1 in Cleaning & Laundry