Computer Networking - February 2007

I use a twisted pair 2 connect the 2 computers.
i hv run network set up wizard on oth the computers.
it shows me a msg "Network cable unplugged" eventhough it s connected.

2007-02-07 18:23:08 · 6 answers · asked by viki 1

I cant get it to pick up the connection with SBC.I tired the D Link web site and followed the instructions, but I cant get a live connection when I go thrughmy router. I amstuck

2007-02-07 18:03:01 · 5 answers · asked by Anonymous

between CCNA - Cisco Certified Networking associates and MCSE - Microsoft certified systems engineer, which one is valuable in future..........

2007-02-07 17:41:21 · 4 answers · asked by Sir Jas 2

2007-02-07 17:27:02 · 11 answers · asked by amuthan 1

2007-02-07 15:24:52 · 19 answers · asked by mohd.musthafavkd 1

is there a program that can monitor my wireless connection and show me my other connections that are connected to my wireless router

2007-02-07 14:58:32 · 2 answers · asked by Anonymous

My husband and I both have I Pods but we like different music. I want to set up accounts for both of us so our I pod's go to our own account. Is this possiable?

2007-02-07 14:11:51 · 3 answers · asked by upnorth 2

on my main computer but for some reason the files wont play. I have tried everything but no sound. it keeps comin up in itunes player and i want windows media player set as my default player. I dont know if this is why they wont play, but it use to.

2007-02-07 13:35:34 · 6 answers · asked by cuddles 2

need example for ip address to a host computer behind a router and firewall

2007-02-07 13:26:35 · 1 answers · asked by Bill D 1

the connection is found

2007-02-07 13:06:18 · 3 answers · asked by You may be right 7

I've been thinking that a Dynamic IP is where multiple computers can use the same IP and Static is where only one may use it. Am I right?

2007-02-07 12:08:35 · 5 answers · asked by Slate 1

I have turned off automatic updates, but each time I connect, the modem downloads at least 4 megs of unidentified stuff, completely clogging up the connection. Then, the modem stops communicating and I have to either reboot , or reinstall the driver to make it work. any ideas? thanks!

2007-02-07 12:07:37 · 5 answers · asked by gwlandis2 3

She logs in and it dials and lets her stay on for about 5 sec and then kicks her off and if she's lucky maybe 5 min, but when she gets it to stay open for about 4 min she tries to open her messenger, it won't connect. She's tried 3 different ISP so i doubt that's the problem, but when she brings her laptop over my house or anywhere else that has a phone line port it lets her connect. Can anyone tell me what the problem could possibly be?

2007-02-07 12:04:29 · 2 answers · asked by Anonymous

I purchased a DI-524 router and DWLG-122 USB Wireless adapter togther and was able to set up the router easily. I had no problem picking up the wireless signal on my laptop anywhere in the house, but when I attempted to install and use the USB adapter it will not work.

I've installed the latest firmware update, but it still reports that it cannot find a wireless network, even though my laptop is sitting right next to it and reports that the signal strength is excellent.

I've uninstalled and reinstalled numerous times without ever having the USB adapter pick up the signal.

The people I've talked to on the tech support line were very difficult to understand and I have a hard time believing that this can be that difficult as it should be a straightforward plug and play type of solution.

I have not changed any factory defaults so I'm thinking this may be a hardware failure. Any help you can offer would be most appreciated!

2007-02-07 11:54:36 · 4 answers · asked by SteveMcGarrett 1

It's for my wii

2007-02-07 11:20:40 · 6 answers · asked by Kevin H 1

I have a Linksys WRT54GS router. Back when I used Netgear routers, they had a feature called "Attached Devices." When you clicked the icon, all devices attached to the router were listed. With the Linksys, only DHCP clients are listed. According to Linksys, this feature is not available anywhere on their router. As far as I'm concerned, not being able to see all devices on my LAN is a significant security risk. What software do you recommend that would simply perform the function of showing me all devices attached to my local network?

2007-02-07 11:01:46 · 4 answers · asked by calipete 2

Have USBbluetooth adapter (plugged into my laptop) that is supposed to let me access the Internet from my laptop via my cell phone. The laptop and phone have been paired (recognize each other) and my Nokia is I-net enabled. What do I do next? I'm stuck!
Thanks!!

2007-02-07 10:56:18 · 2 answers · asked by Peek-a-Boo B Nursing Covers.com 1

We have ethernet cord run all over the house. The way it is set up is that our phone comes in from the outside and the internet is run in to our home office. The outside phone wire is run to our attic, and there is also a wire connecting the office to the attic. We have every ethernet wire in the house running up in to the attic as well. We only have 1 ethernet port in each room. Some rooms we would like both internet and phone. Is this possible?

2007-02-07 10:55:37 · 2 answers · asked by booieh 1

I have an Actiontec GT701R DSL Modem powered by Qwest and a Linksys WRT54G Router. I have other computers and printers in my home that need to be networked together. I cannot get the Linksys and the Actiontec to work together.

They both have the latest firmware versions installed.

I just want to plug my network devices into my linksys and then have it all move through the Actiontec out to the web. I also would like my wireless to work, but I just need the ethernet stuff to work at the moment.

I have a dire need to get this working as quickly as I can, please help.

2007-02-07 10:20:11 · 3 answers · asked by Jason 5

2007-02-07 10:08:45 · 2 answers · asked by Mike M 1

2007-02-07 09:59:51 · 4 answers · asked by Brian S 2

i have a wireless G broadband Router with SpeedBooster......which I use for my laptop...howerver ...how do i stop from someone to accesssing my wireless network...???????.....where do i set up a password......??

please be as specific as possible please...

2007-02-07 09:56:46 · 4 answers · asked by elbestionblog 1

I need to update on the following drivers:
-Standard Dual Channel PCI IDE Controller
-VIA Bus Master IDE Controller
-Realtek RTL8139/810x Family Fast Ethernet NIC
-Vinyl AC'97 Codec Combo Driver (WDM)
-VIA Standard Host Bridge
-VIA Rev 5 or later USB Universal Hot Controller

I don't quite know where to look right now =/ I have a program called "Device Driver" to find the drivers I need to update, but I can't afford to activate it so that I can d/l the drivers immediately. I wish to update these drivers so it will cause me less trouble in the future.

If someone can help me, I appreciate it!
I use an emachine, and they don't help me look for the updates at all for the drivers that I have, and most of these I don't know the company that made them.

2007-02-07 09:47:37 · 1 answers · asked by Vreham 1

If my Xbox 360 is upstairs in my room and my pc (with modem) are downstairs and the ethernet cable will not extend to the pc what should I do? I DONT want to hassle with wireless communications, but I was thinking since I have a phone cord outlet in my room I could hook up the exsisting modem to the phone outlet and hook my 360 into that or I could just buy another modem and do the same thing. Im already getting highspeed internet as well. (earthlink) Thanks for your time

2007-02-07 09:20:25 · 2 answers · asked by JohnD 1

2007-02-07 09:07:57 · 4 answers · asked by Anonymous

the computer says local area connection is now connected but i still can not access anything on the internet. How do I fix this?

2007-02-07 08:44:07 · 2 answers · asked by sportsfan 3

I need a long DSL cord to put it in my room and the one provided by my dsl provider is too short i want to know the name of that cord to purchase one cause the regular phone cord wont let the modem light up the dsl light which enables service. Thank you

2007-02-07 08:42:00 · 7 answers · asked by natienn12 2

i want to share my printer within my wireless/wired network..

do i need to get a print server to do this??

2007-02-07 08:40:54 · 4 answers · asked by Anonymous

For example, I have Linksys Easylink Advisor installed in the main computer, and the program shows the computers from my friends currently connected.
What do I need in order to stop a specific connection momentarily while keeping the others online?

Thank you.

2007-02-07 08:29:32 · 2 answers · asked by Anonymous

Note: I don't understand why companies bother with setting up routers & VPNs when Citrix's GoToMyPC allows remote users to access their PCs over the Web

2007-02-07 08:27:59 · 2 answers · asked by lucky_lenny_1964 3