Computer Networking - September 2006

2006-09-13 18:50:01 · 6 answers · asked by Anonymous

I have a Linksys wireless router with two different laptops. I want to lock the router so that no one else but me can use it.

2006-09-13 18:01:03 · 5 answers · asked by allstrangeaway 2

The connection will start at 54 Mbps but will go down to as low as 2 periodically for no reason at all. I dont move my lap top further away or anything. And before ive had a high stable connection at 54 Mbps. What can i do to get that back or what are some things i can look at that are causing this. By the way my apartment is small and there are no obstructions. This happens even when i have my laptop in the same room as my router.

2006-09-13 15:52:43 · 5 answers · asked by Bucfan 2

I recently got a Comcast with it a RCA DCM425 Modem. I have installed the it on my computer and its working fine. But i cant figure out how to get it to work with my Linksys WRT54G 3.0. I tried several times accrounding to how the instruction said. But every time i open up a new page i get that can not find the page thing. Any Suggestions. Thanks!

2006-09-13 15:50:14 · 1 answers · asked by Sunny 1

I Want to transfer files from my old computer to my new computer by connecting them together directly using the ethernet ports. but when I connect them together and try to setup the network it says it was succesful. but when I go to my network places it does not show up. please tell me how, give me a web site, or tell me what i'm doing wrong.

2006-09-13 14:25:15 · 2 answers · asked by kd1010163 1

i have only the picasa icon in desktop left which will not open it previously trying to transfer a photo onto e.mail. help!

2006-09-13 11:57:13 · 2 answers · asked by theboldflo 1

2006-09-13 11:46:54 · 5 answers · asked by Sweet William 1

There is a particular company, that I can't get through to. Every email address I send to....get returned. Finally, in the contact us section, there is one click-insert-box that doesn't seem to work.
I'll describe the box as follows:::::
On the left side it asks for what are you interested in:
and in the middle of the page, so to speak, is a little box, half of it is blank and the other part has an arrow pointing downward.
Now , when I click on the arrow, I presume that a drop-down list of products or whatever appears, but no such thing happens.
When I click on the arrow, the box stays as is.

If some wonderful person out there has any answer or thoughts, please respond.

2006-09-13 11:31:06 · 5 answers · asked by regwoman123 4

2006-09-13 08:59:34 · 19 answers · asked by vesvol 2

hi i am brijesh BE (computer engineer) from india i want to ask it is gud to enter in the networking field. or i have to chose software as a my career

2006-09-13 08:25:14 · 5 answers · asked by Anonymous

I use my laptop off-line. I upgraded my Exchange 5.5 (Windows NT) to Exchange 2003. I moved my mailbox to the new Exchange server. When I Send/Receive, new email goes into my exchange server inbox, but I can't use it offline. If I get internet email from offline, it goes into the inbox, but when I connect to the server (later), that message disappers.

I upgraded Outlook 2003 to SP2.

I even tried deleting my old .osp file and it did create a new one. But that does not sync either.

When I look at my folder properties, it shows that it NEVER synched. When I go into Send/Received Groups and set these folders to SYNCHRONIZE, I then get an error message after send/recieve that says "Exchange server reported error (0x80070005): You don't have appropriate permission to perform this operation. - I do not see an appropriate setting on Exchange Server 2003 to allow or fix this.

THANKS

2006-09-13 08:18:55 · 3 answers · asked by Anonymous

I have a cable modem and a wireless router with 4 LAN ports. I want to create a 2nd wireless network by plugging in a 2nd wireless router into 1 of the CAT-5 ports on the first router. Is this possible?

2006-09-13 07:46:46 · 5 answers · asked by sunseekerrv 3

The gist:
Two computers at my home. I have a router (not wireless) the cable that runs from that router to MY computer is too short and doesn't reach to the back of my PC. I need a longer cable in other words but I need to know the name....Can anybody help ?

2006-09-13 07:27:03 · 14 answers · asked by cryingrainbow 2

plsssss reply soooooonnnnn. how to hack access point

2006-09-13 06:56:51 · 4 answers · asked by i_m_brash 2

My printer is wired to my desktop computer. I have a wireless router attached to it. I use my laptop in other parts of the house. In order to print a document from my laptop the two must share information. How do you make the computers share.

2006-09-13 06:56:01 · 4 answers · asked by wet3pter 1

my college hostel building, faculty building, main building all have a connected lan system with a server at the main building. my problem is that my files or net browsing is not secure as teachers, students and others can see what i am doing. they can control my pc remotely
most of them can see what i am doing . because of this everything is
open and insecure .

2006-09-13 06:55:11 · 2 answers · asked by ankitazen 1

I'm Looking For A Networking Program The Well Help Me Connect My 2 Computers So I Can Access Info From Each Other. I Tried The XP Networking Wizard But That Didn’t Work. Both Computers Are Connected Through Ethernet Cables And To A Hub. This Is What I Want It For I Want To Use My One Computer To Hold My Pics, & Music And I Want To Be Able To Use It On A Different Computer. Since The Windows Networking Wizard Didn’t Work I Want To Know If There Is A Program That Will Work To Achieve What I Want If Possible

2006-09-13 06:52:52 · 4 answers · asked by Rob 2

Hi,
I'm an intern with a small company who's contract with a VOIP provider has ended. We're looking into setting up our own VOIP systems because our VOIP provider has been giving us less than proper service.
As an intern, I'm given the task of finding out how to achieve this, but I have absolutely no idea where and how to start. The net doesn't really offer anything except adverts on VOIP business plans on VONAGE, which is completely irrelevant...
What do you need to set up your own VOIP system to offer for commerical use to the public? Some kind of server? What about softwares?
Any help, will be greatly appreciated.

2006-09-13 06:51:07 · 1 answers · asked by Jenova 5

cause we have this major project that we are assigned to propose a design to a company who doesnt have an existing network design can anyone help me..lets talk thru yahoo messenger..pls

2006-09-13 06:12:12 · 5 answers · asked by honeypotter_08 1

is Security Center is disabled. My question is where and how to enable it?

2006-09-13 06:03:26 · 1 answers · asked by regwoman123 4

2006-09-13 05:51:40 · 6 answers · asked by honeypotter_08 1

i'm noticing censorship here... i'd just like to know who/why they care exactly.

2006-09-13 05:19:27 · 4 answers · asked by honorablepassion 2

just wondering answer as soon as possible.

2006-09-13 04:55:47 · 2 answers · asked by DeeVA 2

2006-09-13 04:26:46 · 4 answers · asked by harsha 3

I'm talking about the remote desktop program that windows Xp comes with.

2006-09-13 04:23:28 · 3 answers · asked by Skull M 1

I am just trying to figure out, how much does it mean in file transfer speed to have a LAN connection of 10 or 100 or 1000 Mbps.

2006-09-13 04:02:22 · 7 answers · asked by Anonymous

please giveing more information

2006-09-13 04:01:28 · 27 answers · asked by Anonymous

It seems as though I recently downloaded this larger type through Yahoo but I don't like these large fonts and want to go back to the smaller ones

2006-09-13 03:36:04 · 3 answers · asked by snugzee1 1

2006-09-13 02:39:27 · 5 answers · asked by henryspringate 1

2006-09-13 02:07:13 · 1 answers · asked by Mehul 1