Maintenance & Repairs - December 2007

Last week, my 1991 Ford Escort Stationwagon with automatic transmission was towed from a parking lot. I was not there when it was towed, so I do not know how it was towed. When I got the car back it made a loud noise when I turned the engine on (similar to like a motorcycle), and when I drive the engine is much louder than before. Does anyone know what the problem could be and how I could fix it? I tried to be as detailed as I can, as I do not know much about cars. Thanks for anyone who can help!!

2007-12-09 09:24:12 · 4 answers · asked by Ryan S 2

My L120 Automatic has ceased mowing! I was mulching leaves, and the blades stopped spinning. Belts aren't broken and in correct positions and tensions... I moved off to a clear area, and when I push / pull the PTO button, nothing happens!

Any ideas as to what the problem is and how to fix? The Manual doesn't cover this in the trouble-shooting guide.

Thanks in Advance.

2007-12-09 09:09:57 · 7 answers · asked by mariner31 7

Someone drilled the car door locks out of my ford ranger and I can't get into my truck. I was wondering how much it would cost and who I should have install new car door locks? Do I go to an auto body shop? The dealership? I have no idea who to go to and how much this is gonna be.

2007-12-09 08:31:23 · 5 answers · asked by Anonymous

i have a 1995 chevy silverodo my breaks when i stop push all the way down to the floor how long will they last befor they go out and what do u think is the problem?

2007-12-09 08:17:14 · 10 answers · asked by justin p 1

I have removed the fuel lines from the fuel rail and all the mounting bolts from the fuel rail, the only prblem is I cant get the injectors to lift out. From what I understand they are supposed to just ease out with the rail. any suggestions?

2007-12-09 07:58:47 · 4 answers · asked by mickelmac353 2

I know people who put the diesel oil in the gas pickup engine because they get it in bulk from friends who have highway trucks in barrells......I THINK thats prob really not a good idea to put diesel oil in a gas engine. ANYONE really know if its a bad idea or not.

2007-12-09 07:37:35 · 6 answers · asked by Anonymous

My 1996 Jeep Grand Cherokee was givng me problems, jerking at stop lights and then when the light turned green my car would have no acceleration and almost shut off. I took it to Meineke and they replaced the fuel filter, but the problem still persisted so I took it back. Then we got a fuel induction service ( I think that's what it's called) and they cleaned out my system. It was running better, but after I drove it for an hour it started to lose acceleration, but it didn't jerk this time. The check engine light came back on. The first time the code pointed to a fuel problem. Do I need to go back and get it cleaned more? Or is it something else? HELP!!!

2007-12-09 06:16:35 · 8 answers · asked by sammy j 2

I was in a car wreck and the lady hit me on my front left side and ever since then my streering wheel needs to be uside down to go straight and i hear this awful grinding sound when i make major turns i.e pulling into a parking lot. I think its my alignment but i am not sure.

2007-12-09 06:10:27 · 16 answers · asked by lostinthetrance 1

To drive with 15" wheels on the front of your car and 14" wheels on the front?

2007-12-09 04:52:32 · 9 answers · asked by coz_6 1

b4 my dad finds out!!!!!!!

2007-12-09 04:40:23 · 4 answers · asked by jbl290 2

when i turn my steering wheel my horn honks

2007-12-09 04:00:51 · 4 answers · asked by april d 1

2007-12-09 03:43:32 · 9 answers · asked by jasen 1

2007-12-09 03:39:49 · 6 answers · asked by Kevin M 1

Live in chicago, weather is snowy and icy, Was trying to reverse into garage but car kept slipping. now abs light is on. what can i do, will it turn off on its own...Please help......

2007-12-09 03:20:07 · 4 answers · asked by chitown 1

2007-12-09 03:00:15 · 10 answers · asked by bakanoshinji2000 1

2007-12-09 02:58:36 · 6 answers · asked by brenda v 1

I had oil and filter changed at auto machanic shop, and noticed after checking day after that it was about quarter of an inch above full mark. It says in manual not to overfill, will it bo ok just slightly over full mark?

2007-12-09 02:55:07 · 4 answers · asked by Anonymous

I have a vaxuhall astra t reg and the wipers seem to be playing a game when i use them. altough it went though the m.o.t like it it's very distracting when driving. it seems as though the parking brake has gone. When i put them on intermint they go up and sit there for a 1 or 2 then go down. When i put them on normal speed they work ok untill i shut them off then they just stop where ever. i've got a nack to stoping them now put would it be a big job to do myself (i have little skills though) or what would it cost at a rough figure?

2007-12-09 02:40:05 · 7 answers · asked by rusty2007 1

2007-12-09 02:14:36 · 7 answers · asked by forest lover 2

2007-12-09 02:14:08 · 2 answers · asked by forest lover 2

Recently bought a 1995 Saturn SC1 coupe from my daughter and she says it's stalling sometimes when she goes to turn. not in the turn but at a stop preparing to turn. Car has 187,000 miles Thoughts? I can't replicate the problem.

2007-12-09 02:12:15 · 6 answers · asked by Scott L 5

car cv joints, like on the drive shaft, i need the specific type and a reason why its the right one for the job, thanks

2007-12-09 01:51:18 · 4 answers · asked by Anonymous

it has a new battery and a new alternator.
but when i start my truck the vaultage on my battery meter on the dash is right at 14 were it should be but when i turn my blinkers on it bounces around or when i turn my heater on it drops down around 9 what can i do to fix it

2007-12-09 01:38:52 · 6 answers · asked by big-tdl81 2

i also have a problom with the rear wiper motor it will work if i turn it on and hit the motorthen it works until i shut the engine of and then i have to do it again how can i fix this too thanks

2007-12-09 01:06:49 · 3 answers · asked by robert b 1

i need some advice, i have got the 4 bushings out, of the upper and lower control arm, but now need to get the new ones in, how is this done in a workshop and how can this be done in a shed, thanks in advance, and its a chevrolet camaro 1979, i dont really want to take it to a garage, can it be done DIY style, thanks

2007-12-08 23:25:38 · 11 answers · asked by alex 3

This just started and when I got home I turned the car off and now I cant turn if on again. Could this be my Alternator? Where could I get a rebuilt one if needed. Live in Etobicoke, Ont.
Thx,
M.

2007-12-08 23:24:09 · 4 answers · asked by Anonymous

i need to top up the coolant and dont know if i can use my dads antifreeze!

2007-12-08 23:17:33 · 10 answers · asked by K R 2

There's an important process to go through after you've just fitted a new cam shaft in your engine before driving with it. Apparently it's a "Little known" procedure and few people I know have ever heard of this - even those who've been maintaining their cars all their life and even rebuilt engines to one extent or another.

When I mention this to people (eg to the professional mechanic who just fitted my Golf head with a new cam in it), I get responses like "I've never heard of that" and "No, no, just drive it".

I know what it is but I'm wondering how many people have this knowledge in the front of their minds?

It's obviously something to do with running in as I'm talking about a "newly fitted cam shaft".

2007-12-08 22:59:34 · 7 answers · asked by iRant 3

The condition is as follows. It does start. Has a problem starting right away due to the head gasket.
Has brand new battery, EGR valve, Plugs, Wires, and cap and rotor.
it also has a brand new coil and alternator. All of these parts replaced since may of 07.
It has a alpine cd player with ipod connection on it and upgraded 6x9 speakers in the rear. It has a custom box also. Depending on how much it sells for I may leave my 2 JL 12w3's in there with it's box.
Tires are in very good condition. I have new tail lights for it from APC that are all clear and I just put on it not to long ago the APC mirrors with turn signals.
I have a brand new set of rear brakes that I haven't put on yet that will go with the truck.and the front ones were replaced not to long ago also.


Is this worth buying for 1,500??
How much do I need to replace the head gasket?or can this be fixed?

Thanks in advance!

2007-12-08 20:33:15 · 3 answers · asked by deo 1

Is there anyway to do a diagnostics check on a 1988 honda accord lx? My check engine light is on but the car seems to be running o.k.

2007-12-08 20:04:42 · 6 answers · asked by CHIEF 1