Maintenance & Repairs - November 2007

I have a Scion TC which has about 161 horsepower. I want to make it to about 200-250. How would i do it and how much would you think it would cost? And also by adding more horsepower does it damage the car?

Thanks for the help

2007-11-21 09:43:03 · 11 answers · asked by simdawgydawg 2

I have a 1997 Pontiac Trans Am. For some reason my defroster is fogging up my windows. The defroster blows hot air and the heater works but the windows fog up so bad I have to pull over to clean off the windows to see. Driving with the windows down does not help either. Any suggestions on how I can fix this issue.

In the last year I have had the radiator, all the hoses and heater core flushed and or replaced.

2007-11-21 09:28:03 · 5 answers · asked by Bear 5

Recently I bumped into my friends car (a fairly new 2004-5) SUV. It was backed into at a slow speed (about 4-7 mph) and left a two small cracks in the bumper. Also the bumper is slightly crooked. I would like to have both ideas on how much it would have to cost me whether the bumper is replaced, or isnt replaced.

2007-11-21 08:42:14 · 3 answers · asked by lycanwolf7 1

bought a new battery. not the problem. any answers?

2007-11-21 08:18:00 · 6 answers · asked by Anonymous

2007-11-21 08:14:55 · 14 answers · asked by Jimmy Jamsheed 1

I'm restoring an old car and need to identify some threads but i can't seem to find and info on thread sizes and some threads are actually in the car bodywork so can't be taken to a shop and matched. Has anyone got any thread sizing charts, or know where i can download them from. I mainly need the overall diameters and tpi (threads per inch).
I've also got some pipe fittings running through the chassis rails that need new fitting and these need identifiying insitu also.
Some way also me metric as they have been altered in the past.
Any help much appriciated

2007-11-21 08:13:18 · 11 answers · asked by jbenny1 1

2007-11-21 08:11:36 · 3 answers · asked by roastietoastie 1

WHAT WOULD CAUSE AN ENGINE BLOCK TO CRACK?

SERIOUS ANSWER PLEASE THANKS

I DO NOT HAVE A CAR IM JUST ASKING IN GENERAL

2007-11-21 07:56:48 · 6 answers · asked by 1999 Nissan Skyline GTR Vspec 5

Recently I had problems with the metal part of the lightbulb being stuck in there cause the bulb fell out. Well while i was trying to remove the metal part i messed up the holder and now i cant put a lightbulb in? is it okay to use the oven like that? anyway i can mend it back ? any suggestions??

thanks in advance!!

2007-11-21 06:04:52 · 14 answers · asked by Cynthia C 2

The fluid is in the capillary tube not the head of the guage. There is a copper bulb ot the end of the tube that goes in the engine cooling system. What fluid and any advise on how to install it.

2007-11-21 05:56:39 · 3 answers · asked by charlie p 1

I have a TH 350 trans in a '76 Vette. We put a new carb and intake on. It shifts into 2nd too soon now. The kickdown cable on the carb doesn't seem to be adjusted too short. I suspect a vacuume problem, as the new set up is producing a lot more vacuume than before. I don't know if that can be adjusted even if that is the problem. Any ideas?

2007-11-21 04:53:40 · 4 answers · asked by Lunar_13 1

I was told by someone selling a 97 Chevy Blazer that the freeze plugs are bad. What the heck are freeze plugs and if they are bad he said it will need a new engine. Is that accurate? If it can be fixed w/o a new engine what will it cost?

2007-11-21 04:52:13 · 6 answers · asked by David L 3

2007-11-21 02:44:44 · 13 answers · asked by MIKE 1

i've just recently installed 1 pair of brand new bosch wiper, but my wiper still jumping occasionally though its raining.. i usually spray the windshield w/ washer fluids mixed w/ washer solution.and eventually the wiper goes smooth..but after sometimes its gets jumping again..

what should i do?

please advice..thanks

2007-11-21 02:12:26 · 6 answers · asked by Anonymous

the van will turn over and crank but will not pick up fuel, you can hear the pump working but will not pick any up

2007-11-21 01:47:00 · 8 answers · asked by alccconstruction 1

what is a good conductive material ie: super glue, epoxy, etc. that i can use to glue my tabs back onto my rear window defogger?? does advanced auto parts or any automotive store carry anything like that. i tried the rear defogger repair kit and it didn't work. i what to try something else soldering doesn't hold either. Keep in mind that i have a sebring convertible and when the top goes down the stress on the tabs ;is alot.

Thank you
Mike

2007-11-21 01:21:24 · 3 answers · asked by T.H.C 2

Consumer Reports lists 59 used cars as good bets. The ratings are based upon the overall performance of the cars with respect to reliability as well as other factors. Of the 59 cars, 4 are American designed and manufactured:1. Buick Regal 2. Chevrolet Prizm 3. Lincoln Town Car 4. Pontiac Vibe. The remaining 55 are all Japanese designed cars - some of which are actually assembled in the United States! So why can't American manufacturers make an equally good product? This has been the case for decades and despite the claims of parity, there doesn't appear to be a significant gains in overall quality.

2007-11-21 00:59:50 · 12 answers · asked by Anonymous

2007-11-21 00:58:21 · 3 answers · asked by Anonymous

About 2000 miles ago the low coolant light in my car came on, It was time for an oil change so I took it in the next morning (to the dealer) and told them the light was on. After looking at it they said it was just a hair low and that they didn't see a leak, they topped it off and said they didn't think it was anything to worry about. Today the light came on again and I stopped at a Monro Muffler store and asked if they could add coolant - they did, but said there is obviously a slow leak somewhere - nothing is showing underneath, but I realize that it's not normal. with the holidays coming i'm wondering if anyone else has experienced this problem and if I continue to add coolant if it needs it, if it could wait 6 weeks or so to determine the cause of the leak. It could be something small like a hose, I realize, but fear it's something quite expensive - I have no money right now and I really don't know of a garage that offers a payment plan. Anyone else experienced this or have advice

2007-11-21 00:49:22 · 9 answers · asked by skcubog 1

2007-11-21 00:41:51 · 2 answers · asked by onel 1

2007-11-20 20:30:17 · 13 answers · asked by Dave W 1

its hilarious Im thinking of getting it for my bro's dorm for Christmas. What are some crazy things youve seen on Ebay?

2007-11-20 15:32:41 · 1 answers · asked by Steve S. 3

I have a 96 plymouth mini van, it was over heating so I had a new thermostat put on and that took care of the problem, but that wasnt the only problem, its leaking antifreeze, but its not leaking onto the ground, I have had 3 different people look at it. You can smell it burning off of something when I'm driving it, but there is never a wet spot on the ground after I park it. We have checked the oil thinking maybe it was a head, but there is nothing but oil there. We have checked the floor boards to see if it was the heater core and nothing there either. I am having to put on average a gallon of water in it every other day or 2. I am a single mother who just lost her child support(he dissappeared) and our company just cut everyones hours I can afford to take it someone where right now. Anyone have any ideas????

2007-11-20 15:26:18 · 7 answers · asked by goncrzy1 1

2007-11-20 15:10:58 · 12 answers · asked by Cloudy 3

Anyone know the approximate pressure inside an engine cylinder immediately after it has been detonated by the spark? In other words, the maximum pressure that ever develops inside the cylinder?

2007-11-20 15:00:00 · 3 answers · asked by All hat 7

I have a 93 cherrokee and I wanna know if my fuel pump is going out. what are the signs?

2007-11-20 14:48:49 · 3 answers · asked by Anonymous

I took my car to the shop and after it was fixed they left the car outside to be picked up when i came closer to the car at night i realized somebody broke into my car and took my portable cd player not only that my both front window is broken . Next morning i got hold of the shop owner he said his insurance company will not for the damage you might try the landlord of the shopping mall know he gave me the landlords contact info
my question who is responsible for my car is the shop owner or the landlord of the shopping mall . your promt response will be greatly appriciated

p.s. I do not have any insurance it was gone for renewal at the time.

2007-11-20 14:42:38 · 7 answers · asked by T2 1

I have a cyl. #4 misfire. It has spark. Their is electrical current to the injector. If a cylinder has spark and fuel how else can the computer tell that #4 is misfiring. The O2 sensor is common to all three cylinders in the rear bank. -It is 99 GM 3.8L V6-
Any thoughts would be appreciated.

2007-11-20 13:45:59 · 13 answers · asked by Travster 2

how much pressure is at the rear seal

2007-11-20 13:45:09 · 8 answers · asked by karly d 2

Really as bad as I assumed once I realized what had been done to my car? Because it is currently in the shop and I have been driving a rental provided by my full coverage insurance for the past 3 - 4wks.

2007-11-20 13:34:37 · 8 answers · asked by Miss Megan * 1