Maintenance & Repairs - August 2006

2006-08-27 00:57:22 · 6 answers · asked by 2t. 1

have taken out all bolts as described in haynes manuall sump is removed n the next part is seperated apart from whr it meets the bell housin n i cnt get it to move...tried prying it apart n cant c any other bolts to take out...however i can c my conrods n its makin me sick nt bein able to get to thm hehe

2006-08-27 00:47:45 · 3 answers · asked by vekmaster98 2

In the manual I got from stainless steel brake corp along with my set of 4 new 4 piston calipers ( don't trip, the kit was only 470 bucks) they say a good method for bleeding the brakes is to use a gravity bleeding methode,, that is "leave all caliper bleed screws open with the rear of the car raised to 15" at the rear axel shafts. Observe each bleeder valve untill fluid begins to flow out, shut off valve as as fliud appears at each valve" that's it. they say this is the recomended method. do you think this will work?

Also, the brakes are constant contact type and I am changing the rotors also with a set from fast corvettes,, they say a run out of over .005 in may cause air in tghe lines,, I have no way of measuring the run out,, do you think it will be ok odr should I have it checked. If so, what is a good national brand shop to take the car to to have it checked?

2006-08-27 00:32:07 · 5 answers · asked by Anonymous

1997 Dodge Caravan, 194,000 miles. There is a noise that comes
from the drive train when above 40mph. It increases in frequency
as the speed increases. Can't really say which side it's coming from.
No noises when turning sharply (slowly in a parking lot, both directions) , and no boot damage on drive axles.
I think it's the wheel bearing hub but how do I tell for sure without
buying new ones to try replacing. $110 each. I put the van on jack
stands and looked for play in the drive axles, but couldn't detect anything. Suggestions?

2006-08-27 00:16:17 · 5 answers · asked by smile4u 5

The tonneau version I have, I've been told is an older one

2006-08-26 23:55:19 · 2 answers · asked by Lrry406 1

The blower is working. The compressor just isn't turning.

2006-08-26 23:32:56 · 5 answers · asked by Anonymous

An oil line connecting underneath, to same housing part for my oil filter? PLEASE HELP!!!

2006-08-26 23:23:10 · 10 answers · asked by Krista H 1

when tightning a nut on my car wheel the other day it snapped and left the threads inside, is there any way to remove the threaded end?

2006-08-26 23:01:46 · 16 answers · asked by podge_celt 2

2006-08-26 22:26:11 · 5 answers · asked by 2t. 1

there is no key slot to open boot and the button inside car doesnt work because the battery is too flat, is there another way of getting into the boot the retrieve my jump leads ?

2006-08-26 22:17:34 · 10 answers · asked by dazzadrew 2

2006-08-26 20:36:18 · 4 answers · asked by Tom L 1

I want to make my 96 LX faster. now i understand its not going to beat a 68 nova, but i still want a fast car. now i was going to go ahead and buy a turbo kit. What else should i get to help out the process?

2006-08-26 20:30:20 · 8 answers · asked by Anonymous

a carburator that got 150-200 mpg. maybe more, this is how the numbers work out every time you fill up with gas it would be time to change your oil
so how much would you pay? and would you buy one?

2006-08-26 20:25:31 · 10 answers · asked by colter_bay 2

It is a 1984 Ford F-100 w/ a 1976 300ci straight 6 engine and automatic transmission. It has one owner since new and appears to have been well maintained visually it is in excellent condition and mechanically is good other than the battery not charging. I need all possible causes to decide whether or not I should buy this truck for $800 and fix it.

2006-08-26 20:17:02 · 13 answers · asked by johnnyrebel1982 2

It costs $100 to change the transmission oil, it can't say the different with new oil when you are driving.

2006-08-26 19:47:22 · 10 answers · asked by p t 1

anybody out there with an "03" trail blazer????? any problems with them???

2006-08-26 19:24:10 · 4 answers · asked by Lisa 5

I know the big block auto for Mopars is the 727, I pulled the 318 out of my Dart and it has a 727, but the 318, although the wide block, is still a small block right? So will this 727 work with a big block or is it really like a 904 but just called a 727 cause the bolt pattern would be different, or is the 318 wide block a big block, and made as a small block after 64? I know the main difference between the 318 wide and a post 64 318 is that the early ones had heads designed in the hemi style, while the post 64 heads were of the wedge design. I want to keep the push button set-up, but I want to build a big block for the car, if I have to go to a big 727 then I will just build a small block for it, so I can keep the push button tranny.

2006-08-26 19:10:21 · 5 answers · asked by Anonymous

My GF has a toyota 4runner but her manual doesnt state how much oil to put in during an oil change. Ive done some research but nothing has come up.

2006-08-26 19:02:25 · 4 answers · asked by kkwong5 2

I have a 1993 pontiac bonneville, a brand new AC compressor was replaced, the AC worked for about a month then the air stopped getting cold, i had it looked at there were no leakages, it's still full of freon, the person looking at my car had reseted some tpye of switch or fuse then the air started getting cold again, it only lasted for month and went back out, what could possibly be the problem? or what type of switch would it be?

2006-08-26 18:59:52 · 10 answers · asked by Layce 1

in a motorhome.

2006-08-26 18:55:26 · 4 answers · asked by Anonymous

2006-08-26 18:50:27 · 5 answers · asked by pg73088 1

i have 91 honda accord. the problem is when i start the engine the first time it is ok,but when i leave the car running for 15 minutes and then turn it off i cannot restart the car. i would have to jump the battery for it to start.... what is wrong?

2006-08-26 18:49:57 · 5 answers · asked by jose rafael r 1

It's not the battery cause my lights come on. And it's not the alternator.

2006-08-26 18:04:29 · 11 answers · asked by pee pee 2

2006-08-26 18:00:33 · 6 answers · asked by Anonymous

The closure I am asking about will a week-end closing.

2006-08-26 17:57:01 · 1 answers · asked by popblando pablo 1

2006-08-26 17:51:01 · 4 answers · asked by bus driver 2

It only rattles at high volume. The sub is only rated at 300 watts.

2006-08-26 17:47:37 · 1 answers · asked by tony4321_1 1

2006-08-26 17:37:42 · 2 answers · asked by Ricky W 1

rebuilt carb..still no passing gear..no power in passing other cars.what is problem?

2006-08-26 17:17:59 · 6 answers · asked by lee99_20002000 1

Tree sap

2006-08-26 17:16:13 · 5 answers · asked by Bgirl 2