Car Audio

I have a 1996 Blazer LS with all factory radio and dash. I would like to get a Avic-D3 but I do not know if it will fit. Does anybody know if it will fit, I will make custom fittings for it. Thanks.

2007-04-27 02:23:18 · 4 answers · asked by nickman013 1

I need help hooking a remote wire to my jvc kd-g220.

2007-04-27 02:20:19 · 5 answers · asked by Brent 1

i have a pontiac sunfire 2000, i dont know if putting a system will mess up my car.

2007-04-26 17:45:31 · 6 answers · asked by sheryllongoria 1

How do these three look together?
Sub: http://www.garnerstereo.com/products.php

Enclosing: http://www.garnerstereo.com/products.php

Amp: http://www.garnerstereo.com/products.php

I don't know a whole lot about the scientific mumbo jumbo but these three looked good to me... was looking to see if anyone would change anything or if they would know of a better combo for a similar price maybe? any input is helpful. I just want one sub... i'm not looking to show off but I still want a good solid sound so i thought that sub looked good and the amp says it only has one channel but if i'm only powering one sub then that's all I need right? 12" sub so I got a 12" enclosing.. made sence to me.. just any opinions would be nice.

2007-04-26 14:33:20 · 3 answers · asked by Anonymous

2007-04-26 13:30:09 · 6 answers · asked by Anonymous

2007-04-26 11:58:52 · 3 answers · asked by Anonymous

2007-04-26 10:54:59 · 1 answers · asked by sopri 1

I have a four channel amp hooked up to two ten inch sony xplod subs i am trying to hook up the regular speakers up to the amp too so i can have that crisp sound how do i hook them up?? I took the (+) and (-) plugs out of the speakers what do i do now?

2007-04-26 08:25:24 · 2 answers · asked by Cameron W 1

Do you need a amplifier to put a subwoofer in the car? I not, how do you wire the sub like a normal speaker?

2007-04-26 08:22:51 · 6 answers · asked by bill 1

what i want to know is how do i hook up my sub to get the 300 rms from the amp? and can my sub be hooked up to get 2ohm if its dual 4ohm vc? and will it sound ok

2007-04-26 08:08:37 · 3 answers · asked by jesse m 1

the whole right side speakers of my 1995 pontiac sunfire wont work...do u think a wire isnt connected right?...it was playing alittle bit but was really staticy...or did the person before me blow the whole right side out?

2007-04-26 07:24:12 · 6 answers · asked by Anonymous

the 2000+ model of chevy attach abs brakes and air bags and electic stuff to the radio, and i need a part to simulate the stock radio being there and its round 150 everywhere...maybe someone knows where i can get it cheaper?

2007-04-26 07:16:42 · 5 answers · asked by Anonymous

Okay, this has been killing me for a while now. Whenever I try and push my Type R (2OHM-1500W) I get "CUR" displayed on my amp and it cuts off completly. Everything is set up correctly. Just changed the groud from 8 to 4 gauge and still the same.

2007-04-26 06:27:01 · 2 answers · asked by Aaron B 5

Installed this HU on a bmw e46. It works fine but on the radio u can hear some static . You can listen to the radio but this static on the background is very annoying. It was installed at an authorized car audio shop and the antenna is not the problem . I'm thinking it could be some settings that i need to do . Any ideeas ??

2007-04-26 06:18:00 · 3 answers · asked by lup31337 1

i have 2 mtx subs that are 8ohm svc in a box but run to 1 speaker terminal at the back of the box and the terminal has a 4ohm symbol. i have a amp that is 400 rms x1 (4ohm stable in bridged mode) will this amp put out the 200rms i nedd to both speaker if i run it like this??

its a 2 channel amp and remember that there is ONLY 1 speaker terminal on this box. THANK YOU!!

2007-04-26 05:38:04 · 3 answers · asked by vananabanana22 2

I know that at the very least there would be a performance drop. The situation is i have a old 10" passive sub sitting around from a home theater system, and i have a alpine mrp-650 amp hooked up with power, just no sub to plug in at this time other than the sub i mentioned. it's not in my buget to get what i want eventually, so i am looking for a temp fix. I just don't want to hook it up if there is a chance it would somehow damage the amp.

my amp - http://www.alpine-usa.com/US-en/products/product.php?model=MRP-M650&lang=en&tab=F

2007-04-26 05:08:25 · 2 answers · asked by Anonymous

This got knocked out in an accident and although one side is firmly reattached the other side remains loose. I dont know if something on the face plate is broken (easy to get a new kit) or something it is attached to has broken (probably expensive) so I'm trying to find out how it's fixed onto the car.

2007-04-26 04:56:50 · 1 answers · asked by KtheK 1

I used a online box design program to get my deminsions. Do I need to make two seperate boxes or can I just double all the deminsions? Does there need to be a wall inside the box seperating the two chambers? Thanx

2007-04-26 04:18:26 · 4 answers · asked by Justin J 1

2007-04-26 02:21:36 · 2 answers · asked by Don D 1

It seems to be a "premium" stereo for a lot of GM cars...but how does it sound? Thanks

2007-04-26 01:47:43 · 4 answers · asked by questions1440 2

I just bought a car with it already installed and I have no idea how to work it.

2007-04-25 23:20:26 · 1 answers · asked by deja_vu_poet 1

I know the type-r is rated at 500 watts rms, but I also know that some people advocate overpowering a little (which doesn't make sense to me, but whatever) and I was wondering how much you can usually overpower. I was going to power this woofer with 600 watts rms at 2 ohms and 800 watts max at 2 ohms. would i be better off running it at 300 watts rms at 2 ohms and 500 watts max at 2 ohms?

2007-04-25 12:33:59 · 3 answers · asked by codenamebass 2

I Have a memphis 1000d amp pushing to 15inch woofers

2007-04-25 12:08:34 · 6 answers · asked by Chris A 1

anyone know how to remove the old delco and to install the new one, its a pioneer deh p7000r so any idea on how to remove the old one?

2007-04-25 11:41:50 · 3 answers · asked by moonraker72712 2

i have a pioneer GM510T 760 watt cea2006 amp and 2 MTX ROAD THUNDER SUBS 4ohm SVC that are 800 watts peak and 400 rms. the amp is 2 channel and the sub box only has 1 neg & pos terminal...if i wire this amp bridged (it can be bridged) to the subs would it power them properly?? PLEASE BE SPECIFIC!

2007-04-25 11:29:51 · 4 answers · asked by Anonymous

2007-04-25 10:12:05 · 10 answers · asked by beta 1

If i have two subs and one 1000 watt rms mono block amp and i connect the two subs to it will i get 1000 watts going to each sub or will it split and only have 500 watts going to each sub?

2007-04-25 08:32:26 · 5 answers · asked by Anonymous

a friend gave me 2 10" 900w explod speakers for a sub...but head unit which also a SONY doesnt have a sub line...what do i do?i know i have to buy an amp..how can i install everything to my stereo?

2007-04-25 07:53:56 · 3 answers · asked by red 1

My Aiwa's power is on,output 50w X 4, 4 positives.4negatives.
but my 99 chevy has only 4 wires for 4 speakers. I am short of 4 wires. I don't know those 4 wires are positive or negative. I had connected my car's 4 wires to 4 positives of radio. and 4 negatives of radio put together and connected to the negative of the power line, it didn't work, I need help.

2007-04-25 07:28:01 · 6 answers · asked by tiger 2

The car does not run and I'm having it towed.

2007-04-25 06:40:04 · 3 answers · asked by ezloanbymike 1