Okay, this has been killing me for a while now. Whenever I try and push my Type R (2OHM-1500W) I get "CUR" displayed on my amp and it cuts off completly. Everything is set up correctly. Just changed the groud from 8 to 4 gauge and still the same.
2007-04-26 06:27:01 · 2 answers · asked by Aaron B 5 in Cars & Transportation ➔ Car Audio
Sorry, the amp is 2-ohm stable and is perfect for the sub.
2007-04-26 16:26:44 · update #1
Sorry, the amp is a Mono 2-ohm stable and is perfect for the sub.
2007-04-26 16:27:33 · update #2
An over-current problem usually means that you're hooked up to a load impedance that's too low. This can be caused by improper subwoofer wiring, loose or shorted speaker wires or a blown subwoofer. If I were testing it, I'd start by disconnecting the speakers and measuring the resistance through the speaker wires with a multimeter.
2007-04-26 08:51:52 · answer #1 · answered by KaeZoo 7 · 2⤊ 1⤋
you didn't mention your amp, is it stable at 2 ohm? is it a stereo amp that is bridged? typically they are only stable to 4 ohm.
2007-04-26 09:30:40 · answer #2 · answered by Rick 5 · 1⤊ 1⤋