Car Audio

2007-05-08 18:28:35 · 2 answers · asked by mike d 1

My son had a amp in his truck. He unhooked it and I need to wire it back. I know the power to the positive and he had the ground just grounded to the body and a wire from the radio to a hookup called remote. He also has to input wires plugged into the amp. He has 2 10" he had hooked up to them (he is not around now) but only one set of wires came out of the box he has the speakers in. So on the amp there is two places for speakers to hook up and a line between the positive of one and the negative of the other for a bridge. How do I wire the speakers with just the two wires form the box? He also had an extra wire for something. Bridging? Let me know what I am doing wrong please or how it needs wired. Thanks

2007-05-08 09:52:42 · 2 answers · asked by ronnny 7

I am running a Pioneer head unit, two Alpine amps -- one for each of my two Pioneer subs, and a capacitor. When i turn it up over 20, the music cuts out and it appears that the head unit "resets," it shuts down then comes back on. I tried unhooking both amps, including the RCA wires, and it still did it. Whats the problem?

2007-05-08 08:57:00 · 4 answers · asked by Anonymous

2007-05-08 05:05:34 · 1 answers · asked by Anonymous

2007-05-07 09:30:32 · 11 answers · asked by backfire91 2

just need to get the last wires right so i don't fry the stereo

2007-05-07 06:48:09 · 11 answers · asked by VICKI L 1

2007-05-07 03:53:51 · 3 answers · asked by Kerry T 1

2007-05-07 03:38:37 · 5 answers · asked by Anonymous

amp is "kenwood kac 8103D", 1000 watt mono block
500 watt rms at 2ohms and 300 watt rms at 4ohms......
_and_
sub is "JBL GTO1200B"in original ported enclosure at 250 watts rms (4 ohms) and 1000 watt peak. its single voice coil.

how do i wire this and at wat ohms load shud it be 2 or 4. to get most out of the sub?

2007-05-07 01:35:30 · 4 answers · asked by homez_1 2

I recently bought 2 10" Rockford P2's. I wanted to know what style box would work best with them. and should they be ported or not. currently they are in a bandpass box with 4 ports and i had to cover up 2 of the port holes because no bass was coming out. would it sound better in a bigger box with no ports?

2007-05-07 00:44:22 · 3 answers · asked by jester9236 2

Is it worth to buy a car audio from comp like SONY, PANASONIC etc or some chinese brand will do??? if for a examp I buy for 200 $ sony and there will for 130$ chinese one or not that well known brand but the features are pretty much the same???


Please advise !

2007-05-06 22:53:50 · 6 answers · asked by T-80 1

The car has premium sound with an external amp. The blue wire connects to the radio with it's own connector that is separate from the other 2 harnesses. I believe that it is the remote turn on for the amp. Am I correct???

2007-05-06 16:55:13 · 5 answers · asked by the4biddendonut 2

2007-05-06 16:10:51 · 11 answers · asked by Tyler 1

ok here we go... i have a 1989 camaro RS... the person i bought it from ripped out the stock radio and left nothing but wires. i just need to know what all of the wires are supposed to go to so i can hook up a new cd player... thanks for any help you give

2007-05-06 15:33:59 · 6 answers · asked by Caucasian Invasion 1

I have a 1998 chevy s10 LS and for about a 6 months i have been having problems with my speakers in my truck. The first time this problem happened, my speakers just shut off after going over bump in the road, however, my stereo was playing the cd still, but there was just no sound. Then the next day i go to start my truck and the music turns on, but either after i hit a bumb while driving, or even sometimes if im just driving they will shut off. They did this for like two weeks and then they worked for like 2 months just fine. And now they are doing it again. The speakers will just shut off even if im just sitting in my truck and its in park. So i dont think it's a loose connection because it doesnt take a big bump in the road to stop them from working. If anyone knows what this may be, please let me know. And als o i have Clarion deck, but i don't think it would have much to do with the stereo, since it still plays even after the speakers shut off.

2007-05-06 14:03:30 · 5 answers · asked by vikingfootball32 2

i have a 760 sony xplod amp that keeps showing "osffset" whats that all about how do i fix it why does it happen any info??

2007-05-06 11:53:05 · 2 answers · asked by jembrmstr 1

2007-05-06 11:08:07 · 2 answers · asked by coach 1

I meet this girl last night at my friend's house (she's a friend of a friend)...we didn't really talk 1 on 1 except for the initial introduction, but our whole group were just talking and hanging out together...I really like her and would like to get to know her but I don't know how to get the conversation started next time I see her...what should I say? What should I talk about?

2007-05-06 10:48:08 · 22 answers · asked by Anonymous

i dont have the owners manual, so i dont know where the factory amp is.

2007-05-06 09:17:21 · 1 answers · asked by Anonymous

My car has the Bose system, I am going to add another amp and need to know what the wires are so I can do so

2007-05-06 07:06:56 · 3 answers · asked by Randy B 1

Ok i want to conect a car radio and a shuttle on an adapter is it possible with a 12v 1A adaptor?

Tnx

2007-05-06 05:01:07 · 1 answers · asked by Anonymous

i want to built a box ..but how much thickness it should be..there are many available..powerhandling of my sub is 300rms..its not much so can i use 16mm or less than that...or wht eve is best for it

2007-05-06 01:57:01 · 7 answers · asked by Anonymous

2007-05-06 01:42:46 · 7 answers · asked by michael f 2

i need to change my hyundai accent car battery and have a securety attached to stereo????

2007-05-05 18:14:58 · 10 answers · asked by Anonymous

I have a rockford T1 mono 1000 watt amp already will that work?

2007-05-05 18:07:02 · 3 answers · asked by bradmorici 1

I just finished installing all day a Sony Xplod MEX BT2500 but when I turn it on it says "FAILURE" and for a second the speakers make them faint "surging" noise

2007-05-05 17:43:55 · 3 answers · asked by Jafch1 2

cd player is not the problem cause i got sound using a spare speaker, as soon as i hook it up to the speaker wire harness in the truck i get nothing.

2007-05-05 14:35:19 · 1 answers · asked by squash916 1

I need some pictures to show how the dash comes apart. I want to put a aftermarket radio in there.

2007-05-05 13:34:01 · 4 answers · asked by coach 1

i was wondering if anyone could tell me or have a web site that will show me how to change my front speakers in my 1995 neon ....

2007-05-05 12:46:14 · 2 answers · asked by Anonymous

So yeah my head hurts from all the different answers i've gotten on this subject, and i would just like a straight answer from someone thats knowledgable. I just bought a 600w amp with Line-Level-Inputs. So i just hook up the rear speakers to this amp and i wont needd a line level converter, right?? Thank You!!

2007-05-05 11:36:41 · 5 answers · asked by Tibs99 1