English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Car Audio

[Selected]: All categories Cars & Transportation Car Audio

I own a Jeep Wrangler and the top stays off most of the time. I was wondering if anyone new of a good alarm system to install because I will be installing a new after market stereo system. I have heard of proximity alarms that protect if anyone comes within a specific distance, is there such a thing, and if so does it work?

2007-05-10 11:47:10 · 4 answers · asked by Geeves 2

My car did have great speakers, but wanted more option with bass and treble so picked up new head unit. Now when I have all the sound in the rear speaker, and it maxed on the volume, it isn't very loud, but if I max the front, they are very loud. What could they have done when installing the stereo? They also hooked up an MP3 cable.

2007-05-10 09:11:06 · 4 answers · asked by laurie0802 2

I want to buy a cd player, that is bluetooth compatiable. Now what exactly does it mean when it say's "bluetooth unit ready" does it mean I don't need to purchase anymore for it? I don't know much, but I would like one that has the feature, and I don't need to purchase anything else. (plus needs remote lol) I'm lookin at Kenwood - KDC-MP635, I really want one that also has cool graphics, So Cool Graphics, Bluetooth, and also Ipod ready... Is this the one for me? I'm lookin either for a Kenwood or Pioneer, please help me!! I'm lookin on ebay, that's where I found the one, and I have 1 day left on that model I written above so if its the one, need to know asap so I can purchase it! If you find anything better, needs to stay under $200 THANKS!

2007-05-10 08:50:31 · 2 answers · asked by Anonymous

OK I dont want an answer like go to crutchfield or walmart for a wiring harenss Ive done that it doesnt fit I need to know what the power antenna and ignition switch colors are coming from my car not the cd player any help

2007-05-10 08:21:52 · 4 answers · asked by dnp_iz_the_shiz 1

2007-05-10 05:48:36 · 5 answers · asked by Anonymous

will the pioneer gex-p920xm work with a deh-p6700mp pioneer head unit?

2007-05-10 04:03:03 · 1 answers · asked by brad r 2

the 2 are the GEX-P910xm and the GEX-P920xm

2007-05-09 17:55:11 · 1 answers · asked by brad r 2

2007-05-09 17:51:12 · 2 answers · asked by srosario324 1

Is that even doable? I want to get a nice system in my explorer but I am buyen another car in september and no I dont want to wait so how much would it cost to pay someone to switch it over and is it possable to do so?

2007-05-09 16:40:37 · 3 answers · asked by theoneandonly4251 2

I have a 2004 Pontiac Bonneville SE. I was looking for something that will increase the security of my trunk for I don't happen to come out to my car one day finding my amp and speakers missing. Is there a product out there that will fit my car that will help protect my system? I am planning on getting a good alarm system, but is there anything else that you all would recommend?

2007-05-09 16:07:37 · 6 answers · asked by Anonymous

i have 6 subs svc 4ohm and i want to run them to one amp it is 1 ohm stable but i want to no allternative wireing how would i series parallel them ? i need someone who is intelegent to answer this and what independence would this give me?

2007-05-09 15:36:40 · 4 answers · asked by Daniel C 2

Can a capacitor hurt your subs if the subs arent powerful enough? If the subs RMS at 600 watts and the amp does 600 watts RMS, is it a bad idea to get a 1 fared capacitor?

2007-05-09 15:03:02 · 12 answers · asked by Got Subs? 1

I have an older Mazda Miata that only has 2 speakers ( 1 per door ). I purchased a radio from Best Buy as the previous one had been ripped out through the roof before I purchased this car. The radio I purchased was a cdx-GT310 ( sony ). It has 4 X 52 W output for speakers. The sales rep stated that the installation instructions would tell me how to convert that to 2 X something output, but they do not. I am no longer in Texas where I bought the radio and the nearest Best Buy is 3 hours away. Has any one ever heard of doing something like this?

Fred

2007-05-09 14:59:44 · 5 answers · asked by Fred B 1

i have seen the viper 7900 and i want something like that, i was just wondering if anyone had any other suggestions, or if someone has had this and what they think of it, let me know thanks

2007-05-09 13:56:31 · 2 answers · asked by GAREBEAR 1

I am going to hook up a car stereo inside a weatherproof box on my deck and I need to find a power supply to run it. I want to find something that I can plug into the wall that will supply enough 12volt power to run the stereo.

How many amps does it need to produce to avoid tripping the unit? Most of the ones I've seen at Radio Shack, etc., only produce about 10 amps. Is this enough? I am going to hook up 2 of the Bose indoor/outdoor speakers to it, and that's all.

Any suggestions for a small, reasonable, power supply that will do the trick?

2007-05-09 13:11:15 · 6 answers · asked by playpen333 2

OK I GOT A 2000 INTREPID THE PERSON WHO HOOKED THEM UP ORIGANLY MESSED UP BECAUSE ALL I DO IS BLOW MY RADIO FUSE BECAUSE THE WAY HE HOOKED THEM UP CAN SOME ONE TELL ME THE BEST WAY FOR A 2000 AND 2001 INTREPID AND THE BATTERY IS HARD TO GET TO

2007-05-09 12:53:37 · 2 answers · asked by Allen j 1

My mother has a 2007 Chevrolet Cobalt with an auxiliary input built into the dash. I have been trying to help her setup her mp3 player but the auxiliary jack does just not seem to work
correctly. I run the male/male cord from the mp3 player (2.5mm side) to the auxiliary (3.5mm) and then I put the auxiliary button on the panel. I read the instruction booklet and did exactly as it says to do. More or less all it says to do is plug any MP3 player in and press the auxiliary button to play.

Now I've found something unusual, if I plug the 3.5m into the headphone of the MP3, and the 2.5m in the auxiliary jack (which does not fit--too small) the music will play. Since the 2.5 is too small it will fall out if I let go of it, but it play the music fine.

I tried connecting everything with two different MP3 players and two different cords, but the same thing happened. Does anyone have any suggestions?

2007-05-09 10:00:01 · 1 answers · asked by Anonymous

I got a new Sony CD player (the stock stereo is only a tape cassette player) and I am confident about the wiring and stuff, I just don't know how to get the old radio out. The more descriptive the better. Thanks!

2007-05-09 09:51:50 · 1 answers · asked by mols04 2

It is a 6022i Infinity speaker set.. ive looked at the pictures and everything and i cant figure it out.

There is a metal plate, a plastic plate, the speaker itself, and the cover.. it doesnt seem hard but im still not sure.

2007-05-09 08:44:34 · 1 answers · asked by Aaron H 2

My friend recently bought a used beater of a car and it came with a nice head unit but without a faceplate. Does anyone know where I can get a replacement faceplate for this head unit? Thanks.

2007-05-09 08:07:17 · 4 answers · asked by Mwmorph 2

I have a leased car which I'm not allowed to modify. I have an XM subscription, but since I can't modify the car, I can't hard wire it in. I'm wondering if the pioneer Inno (or any of the XM portable radios) can be used in the car without an antenna. It seems that since these are portable, I shouldn't neeed an antenna to get reception. Correct?

2007-05-09 07:07:04 · 4 answers · asked by stockmoose16 1

I bought a '90 BMW 525 with no radio. The speaker wires, ground, constant power, and ign power are easy to suss out. But there are three left how can I determine were these go?

2007-05-09 06:13:25 · 2 answers · asked by romaranger151 1

ok so heres what im gonna be running 2 Rockford Fosgate T112D4 Power 4 Oohm 12" Sub 1200W and T10001bd 1000 Watt Class-bd Mono Amplifier. Ive done my own amp and sub installs but this was years ago and since i've looked into this again im confused. Since this is a mono amp and im hooking up 2 subs how do i go about this cause after doing some reading ive confused myself.

2007-05-09 05:59:33 · 4 answers · asked by thechris82 1

does any 1 know what the technical name is for this profession??? my husband wants to go to school for this but i don't know how to look it up to find information on any colleges that specialize in it....anyone know of any schools near tx?

2007-05-09 05:57:24 · 4 answers · asked by aidanshope 2

2007-05-08 21:51:20 · 5 answers · asked by romaranger151 1

I want to make my car sound like a night club...I'm talking about the whole deal...new head unit, amp, subwoofer...you name it. I just don't know how much I will be spending...I have a Kia Sephia so I don't think I want to spend much considering the car is pretty much worthless already...
Any ideas on brands...prices....how to install it?
I'm a girl but i'm pretty handy...I can do it myself...
Thanks!!!!!

2007-05-08 21:23:48 · 4 answers · asked by SusiQ 5

fedest.com, questions and answers