Maintenance & Repairs - January 2007

I have a gas furnace, and we just had the ignition module switch replaced cause it was fried about 1 month ago, now it only seems to work when i turn the furnace off, then back on again, and only last for a fewm minutes before the poilet goes out again...the flame keeps goin out, and we are freezing...
some suggustions please
thanks

2007-01-29 05:54:59 · 4 answers · asked by Anonymous

he lives in rayleigh essex......

2007-01-29 05:41:46 · 1 answers · asked by diane c 3

2007-01-29 05:35:21 · 4 answers · asked by Anonymous

2007-01-29 05:30:13 · 7 answers · asked by mary k 6

I have a 110v chandelier that I have used in my home in the States. I would like to use that chandelier in my home overseas that is wired for 220v. To use the chandelier in 220v is the only thing thah I have to do is change the bulbs? There are no fans or motors. The chandelier is only lights.

2007-01-29 05:11:38 · 4 answers · asked by melsraiders2004 1

my Indesit G32VS dryer is 15 months old, just out of guarantee of course. It has now decided to speed up & revolve one way instead of alternating direction every few seconds. Anybody know which part it requires. many thanks

2007-01-29 04:35:08 · 5 answers · asked by Anonymous

I have replaced an ordinary bulb with a flourescent energy saver bulb in an outside lamp . The light comes on automatically at nightfall and has a regular switch indoors, not a dimmer. It starts to flicker after it has warmed up but I can stop the flickering by pressing on the metal body of the lamp body. This seems weird. Is it an earthing problem or what? An ordinary bulb works fine.

2007-01-29 04:30:34 · 8 answers · asked by Anonymous

is it about to fail any advice would be appreciated

2007-01-29 04:17:24 · 3 answers · asked by Anonymous

there is a bad place in corner by shower from water. would i have to do a major repair or a quick fix?

2007-01-29 03:49:41 · 3 answers · asked by expertless 5

what materials do i need to sheetrock?

2007-01-29 03:34:56 · 6 answers · asked by Kevin M 1

Under my bathroom sink, I was trying to replace the old valve, and when I turned it the whole pipe turned and broke. Now I have about 6 inches of jagged edged pipe sticking out of the wall. I need to replace that part, attach the new valve and then attach the hot water supply line. How do I fix the borken pipe myself?

2007-01-29 03:25:20 · 3 answers · asked by bw12117 2

2007-01-29 03:24:38 · 3 answers · asked by Britt B 1

i have a kitchenaid electric dryer it got real hot so i unplugged it and the next day i tried it again and it didn't heat up. can you check the thermosite or the elment if you take it out of the dryer?

2007-01-29 03:11:59 · 3 answers · asked by talonmcl 2

Saw a segment with Ron Hazelton on a drainage system when you have water in your basment. Can not find it on his webb site. HELP

2007-01-29 03:08:04 · 4 answers · asked by caruso06706@sbcglobal.net 1

got a new build 3150 sq ft

underfloor heating downstairs and rads up

4 burner gas hob and electric oven

no electric showers or imersions

all lights are 12v

and ideas per month approx

band A boiler and well insulated.

2007-01-29 03:07:08 · 4 answers · asked by jon b 1

Daytime outside temps are about 30 and night time temps about 10. I have the thermostat set on 69 during the day and the thermostat never gets above 68 and drops to 64 or colder at night. The blower will only shut off when I set thermostat below whatever the current reading on thermostat is.

2007-01-29 01:59:36 · 5 answers · asked by Mary 1

Wiring a 220 circuit Black to one pole on breaker White to the other pole. This is where I get lost, do I wire the other wire to the Ground Bar or to the Neutral/Common Bar?

Thanks

2007-01-29 01:22:31 · 5 answers · asked by hoagie56 1

My furnace is on the fritz. The house is a rental and I will not be paying the utilities, my tenant will be. I am just trying to decide between a high and mid efficiency gas furnace. I can get the mid installed for 1000$ or the high istalled for 1500$. What are the prices normally? I know I'm getting a pretty good deal. So which would you choose? Thanks

2007-01-29 01:08:55 · 5 answers · asked by Vanessa 2

My daughter has a mattress her friends use when they sleep over. It flattens out by the end of the night, but when we blow it up we can't find the spot where the hole is.

2007-01-28 23:39:02 · 9 answers · asked by Elisabeth 2

2007-01-28 23:33:47 · 15 answers · asked by Friend 6

If I turn off all the radiators in the house except this one - the top part warms up only.

2007-01-28 23:32:48 · 3 answers · asked by Siobhan M 1

i want to install an additional radiator to my central heating system
whats the easiest way to do it

2007-01-28 22:16:11 · 7 answers · asked by robert m 2

it's constant dripping

2007-01-28 21:58:47 · 9 answers · asked by scottnixon 1

We have no other problems with plumbing or septic system, but usually on the 2nd time the washing machine is letting out the dirty water into the pipe....boom water is spitting back out. I have to stay in laundry room and keep shuting off machine and turning it back on after I take flash light and look down drain to see water is lower! what a pain. Any Help out there? thanks

2007-01-28 21:35:50 · 7 answers · asked by j p 1

Something that is translucient and dries quickly and hard to keep an object stationary (school project)

2007-01-28 21:15:12 · 5 answers · asked by SF 2

There is this weird blue stuff that periodically drips. It lands right behind the toilet. I don't know exactly what is causing this or why. I have also noticed that it sometimes comes out onto the rim of the toilet. Does anyone know what is going on and how do I fix this?

2007-01-28 19:52:41 · 8 answers · asked by Mom of 3 3

2007-01-28 19:31:02 · 13 answers · asked by IAN F 1

Pls Help. When my laundry machine begins the rinse cycle, and starts draining, the waist water shoots out of the top of the drain pipe sticking out of the wall. Its like the drain pipe can't take the waist water away fast enough so it spills out the the top. Has anyone else had this problem?

2007-01-28 19:28:15 · 8 answers · asked by Alex W 1

2007-01-28 18:43:52 · 4 answers · asked by freedomstar53 1

My boyfriend is visiting his parents tonight...of course....and I looked up and saw smoke coming from his floor lamp. I unplugged it and noticed dead flies underneath the light bulb. I am assuming that is what was causing the smoke. He has had that lamp for many, many years. What else could have happened? It really freaked me out and I feel really stupid right now.

2007-01-28 18:06:29 · 7 answers · asked by teddy 2