Maintenance & Repairs - November 2006

My dryer stopped drying a few days ago. I know that 2 of the thermostats are good...or atleast they show good continuity, and that small fuse is good also, but there is another thing under the thermostat to the left, it shows good continuity at first and then goes up to 2.66k ohms I think is what it was, and the heating element showed 10 ohms I think.... There is a possibility that a switch or something could cause that also right? If there is any advice anyone could give me I would greatly appreciate it.

2006-11-11 15:06:48 · 3 answers · asked by radiografik1 1

What happened? We put in a switch so that the light in my child's room turns on with the light switch as you enter the room, now the master bedroom electricity only works when this light switch in my daughter's room is on. Help?

2006-11-11 14:50:11 · 6 answers · asked by Mommy 3

After it cuts off it will cut back on after about 5 seconds. This will happens maybe 1 or 2 times depending on how long it takes to raise the temp in the house.

2006-11-11 14:49:24 · 5 answers · asked by mybrokefurnace 1

I have a vertical, wall gas heater, I turned off the pilot for the summer. As the weather turned colder, I re lit the pilot. However when I turn up the heater using a honeywell mechanical thermostat, nothing happens. I have confirmed multiple times that my pilot light has remained lit. Still no heat.
What are the steps to trouble shoot this issue

2006-11-11 14:38:32 · 7 answers · asked by Janet from another planet 1

2006-11-11 13:02:06 · 11 answers · asked by Blake N 1

THOSE ANYBODY KNOW WHERE I CAN FIND A MICROWAVE PLATE? I HAVE LOOKED IN EVERY STORE AND I CANNOT FIND ANY. MINE BROKE AND I NEED A NEW ONE, PLEASE HELP. THANXKS!

2006-11-11 12:54:37 · 8 answers · asked by sexy! 1

I need one that is 5 feet long and 2 feet deep. i dont have much money though... is there someting I can attach to the walls to make a table/desk?

2006-11-11 11:53:34 · 7 answers · asked by Anonymous

it flickers, even put in a new bulb and still flickers.
I live in a mobile home--the light is the long kind.
HOW CAN I FIX THIS?

2006-11-11 11:51:26 · 6 answers · asked by Anonymous

2006-11-11 11:44:05 · 4 answers · asked by Anonymous

i what to sill the hole at tobacco machine

2006-11-11 10:54:34 · 3 answers · asked by jayarajoo s 1

I have a Knightsbridge combi boiler
all radiators are working and are very hot, however the water starts off hot when the tap is running but within seconds runs warm then cold. I have tried turning the whole system off - nothing. I have tried opening the value on the boiler nothing. I have also bled all the radiators nothing.
I have a service manual which shows
GAIA

Models G.C appl No.

424S 47 970 08
428S 4797009
424 RS 41 970 04.

Can anybody please suggest some help

2006-11-11 10:20:34 · 13 answers · asked by Bobby 1

In the winter with a strong north wind blowing we get ice on the inside of the windows.

2006-11-11 10:15:55 · 11 answers · asked by graciemae 1

2006-11-11 10:13:26 · 4 answers · asked by tim b 1

2006-11-11 10:03:57 · 8 answers · asked by Rosa 5

THey've gone all blacky yellowish slowly over the years from lots of use. I could throw them out and buy fresh ones but that seems like a waste - so, hellooooooooooo out there - come save my saucepans from going to the saucepan maker!

2006-11-11 09:55:11 · 11 answers · asked by boris and matilda 1

2006-11-11 09:11:04 · 3 answers · asked by only me 1

w/o (tearing out the wall)that my husband wants to do, lol , cause On the other side of the wall is our built-in dishwasher in the kitchen next to that is our kitchen sink ??? we dont need to make an ant hill out of a mule hill !!! so, what's an inexspensive way should we go about repairing ???

2006-11-11 08:15:18 · 11 answers · asked by Anonymous

2006-11-11 07:57:10 · 6 answers · asked by SMCNEIL1 1

I have a brand new LG dryer and I think that something was in the pockets of a sweatshirt. The item must have been caught in the dryer somewhere. Probably on the way to the spiral tube that sends out all of the dirt and stuff. Now, when I turn it on, it makes a wierd noise and it doesn't work. Please help! It's brand new!

2006-11-11 07:15:27 · 5 answers · asked by Larry the Cable Girl 2

I recently was "given" a wall hanging grandfather clock. I know nothing about it. No name, no instructions,,,nothing. I put it on the wall,,,pulled all the weights so they were all at the top. It ran great for about a week. Now one of the weights is touching the floor, it is not running. None of the weights will move. Two are still at the top and the one is at the bottom. Anyone have any idea what's going on or what I did wrong????

2006-11-11 07:01:44 · 4 answers · asked by bugear001 6

There's some pictures on the links below

http://i82.photobucket.com/albums/j253/bbianncca/wild%20life%20on%20our%20backyard/lentes019.jpg

http://i82.photobucket.com/albums/j253/bbianncca/wild%20life%20on%20our%20backyard/lentes018.jpg

2006-11-11 07:00:11 · 6 answers · asked by Anonymous

2006-11-11 06:59:23 · 10 answers · asked by fishing_diychic 1

I have switched the Bolier / heating off for safety. The Plumber is not available to come over until Monday. Therefore want to know what the problem is

2006-11-11 06:59:16 · 6 answers · asked by Anonymous

Bosch SHU 4300 series washer. Hot water has been checked and is OK.

2006-11-11 06:49:25 · 4 answers · asked by Dan D 1

why would the burners not be working. Cant hear or smell gas but the ignitors are clicking but no fire. Any ideas why this is happening? Cant understand why the oven would work but the burners wont.

2006-11-11 06:16:48 · 3 answers · asked by lovelife 1

2006-11-11 05:54:45 · 17 answers · asked by adineeyg 1

2006-11-11 04:24:06 · 1 answers · asked by tom b 2

I'm a concerned carpenter.

2006-11-11 04:17:36 · 24 answers · asked by mememe 1

I am looking for a good drain cleaner that will actually clean out all the gunk.preferably something that I can buy at Home Depot or Lowes.

2006-11-11 03:24:45 · 9 answers · asked by Anonymous

I've recently purchased a used laundry dryer, which has 3 prongs, the outlet in my apartment is 4-prongs. Can an adapter be purchased for the dryer to fit the 4 prongs?

2006-11-11 03:23:33 · 11 answers · asked by Marcia G 1