Maintenance & Repairs - August 2006

The ac unit does not turn on but when we turn on the unit from the house something is running, but when we go out back that unit is not running at all. SInce the house was vacent for some time we are thinking maybe someone switched it off but i have no idea how to check any of these things. WE checked the fuses and everythig is fine. We called the landlord and have not heard anything back.. When we turn the unit on inside the house we hear soemthing but it is not the AC

2006-08-14 05:09:57 · 6 answers · asked by emilyl1017 2

I've been to view a property, and in the lounge there is an old gas fire and behind it in the chimney breast is the back boiler. Can it be easily replaced, or is it worth leaving as a cost effective method of heating the house.

2006-08-14 05:05:38 · 9 answers · asked by Anonymous

I dont get it from any other switches in the house? but this one kinda shorts the others and gives me a shock?

2006-08-14 04:42:43 · 7 answers · asked by livachic2005 4

2006-08-14 04:38:47 · 9 answers · asked by sridharan 1

I need to bury my cable service coax cable in my backyard. I have already battled with the cable company; I lost and I am moving forward. I anticipate I need to run the cable through PVC pipe, dig a 6 in deep trough, lay the pipe - with the cable inserted - and the waterproof the openings, but I want to be certain. I also want it to look clean and professional as I plan to lanscape later. Your collective assistance is greatly appreciated.

2006-08-14 04:21:48 · 15 answers · asked by EBrowne 1

chuck key and start stop swith

2006-08-14 04:07:44 · 5 answers · asked by dgmartin455 1

2006-08-14 03:58:53 · 10 answers · asked by NJ Loverboy 2

2006-08-14 03:40:16 · 5 answers · asked by Rock 2

I'm buying a condo, and the airconditioner isn't cooling. I noticed that there was ice on the pipes going into the outside unit. The condo is only two years old. Could this be an expensive problem?

2006-08-14 03:31:40 · 11 answers · asked by Anonymous

2006-08-14 02:35:54 · 3 answers · asked by TerriDowsett 1

I cleaned my furnace filter 6 weeks ago, It wasn't too bad. I went to clean it again and it was the same as the day I replaced it. Immaculate and free of any dirt or dust!! Rutrow -- what's wrong? It's a new 93% 2 stage variable York Affinity

2006-08-14 02:28:24 · 5 answers · asked by margaret l 1

We had a verbal agreement with our neighbor to replace the fence between our properties. One part of the fence which is very small lies on her property. It is exactly where the fence we replaced was. During the construction she became upset with the height of the fence and that the fence was on her property. Our contractor asked if she wanted the fence to be moved with a couple of his workers present. She said no it was fine and that he should proceed. After becoming upset that some grass clippings were in her drive after I mowed the lawn she was furious and said...I am going to call the better business buereu and you are going to have to move that part of the fence. Any suggestions? She had a verbal agreement with us, and then talked to our contractor and allowed him to proceed with the fence. Is this good enough to hold up in court? Thank you.

2006-08-14 02:21:13 · 9 answers · asked by bgriff193 1

I have an Amana refrigerator with the freezer on the bottom. The freezer works fine but the refrigerator doesn't cool anymore. I noticed some frost on the back of the freezer and tried defrosting it. i left it unplugged for a day and when I plugged it back in the fridge worked for a few hours but then stopped. I assume somethings freezing up but I have no idea how to stop this problem from continuing. Any suggestions?

2006-08-14 00:46:52 · 8 answers · asked by Anonymous

2006-08-13 18:31:42 · 8 answers · asked by Hillol D 1

I would like to store my kid's unused toys in the attic. The attic has plywood 19/35 inches between the joist. There are 2 boxes, each boxes has weight about 12 pound (the box dimension is about 1x2x1) feet.

2006-08-13 17:25:38 · 4 answers · asked by Anonymous

i've rec'vd a quote for a new dual pack 'york 4 ton 13 seer unit for $3600. that does not include the price of fixing any leaking they may find in the attic duct work. i'm wondering how much that may cost me. the duct test and permits are all included in the $3600 price. other quotes for the same unit were going to cost about $4900.and they would fix the leaks also in that price. any info is helpful.....

2006-08-13 15:52:35 · 4 answers · asked by littlesatt 1

repair manual tecoumseh engine model 912011
fm28e

2006-08-13 15:46:17 · 2 answers · asked by George L 1

it is a window ac.

2006-08-13 15:34:43 · 11 answers · asked by pentium 4 2

2006-08-13 14:43:58 · 19 answers · asked by onya50 1

I have a sharper image mini fridge cooler/warmer and the fan doesn't run, can anyone help me find one? I have had it replaced through sharper image and they sent back a nonworking unit. Taking into my own hands now.

2006-08-13 14:37:22 · 3 answers · asked by ~Divine Mrs. P~ 3

2006-08-13 14:09:12 · 13 answers · asked by Anonymous

I have bought a brand new dining room table and chairs, but the two end chairs with the armrests are about an inch and a half too high to slide underneath the table. I have seen a lot of different types of furniture lifts and caster, but they are either too big or poor quality. I need something that is about 1 1/2" in diameter and 1 1/2" high. It needs to be something that the table legs cannot slip off. Does anyone have any ideas?

2006-08-13 14:00:04 · 7 answers · asked by mullinsbrendan 1

2006-08-13 13:27:55 · 10 answers · asked by Margaretintx 1

2006-08-13 13:01:45 · 7 answers · asked by Anonymous

2006-08-13 12:43:20 · 5 answers · asked by mohaaduke 2

2006-08-13 12:42:33 · 10 answers · asked by russell_mcfarland2000 1

2006-08-13 12:17:19 · 4 answers · asked by Anonymous

inside only.

2006-08-13 12:05:20 · 4 answers · asked by G-girl 1

I dropped something heavy on my tub, and a chunk of enamel flew off the size of my thumbnail. It looks like a big black mark on the white tub!

could I buy a small enamel paint tin (like model makers use) and just dab on a little of that?

2006-08-13 11:14:44 · 3 answers · asked by jarm 4

2006-08-13 10:54:38 · 5 answers · asked by tennisplayer 1