Do It Yourself (DIY) - October 2006

2006-10-15 18:13:03 · 2 answers · asked by marion w 2

she can't jump up on the bed she needs some steps

2006-10-15 17:46:44 · 10 answers · asked by cat2974 1

ok im moving from WY to AZ and i was woundering if any one knew a cheap rental moving truck,the cheapest i could find was for 400$ is there any out there that would be cheaper???


and sorry if this is the wrong catagory there is no moving catagory

2006-10-15 17:06:46 · 2 answers · asked by brandy t 3

What would be a good cleaning agent to clean them with.

2006-10-15 16:41:45 · 9 answers · asked by Ellen J 2

2006-10-15 16:32:58 · 4 answers · asked by jon2968 1

these days at a chain hardware store. The hardware stores are closed right now.

2006-10-15 16:25:30 · 7 answers · asked by no_nonsense 3

I have a desk at home but want to add a computer keyboard tray. Where can I get one? I want one that is not too expensive and is easy to assemble by myself.

2006-10-15 16:10:03 · 8 answers · asked by Enoch 4

2006-10-15 15:26:44 · 11 answers · asked by nodumgys 7

hi, i recently got a bunch of salmon and just want to smoke a bunch of it, i have access to a wood heater and im sure can do something with that

2006-10-15 15:15:54 · 3 answers · asked by Anonymous

2006-10-15 14:59:49 · 5 answers · asked by Alesche M 1

2006-10-15 14:48:07 · 3 answers · asked by morpheus 1

Specific stores please.

2006-10-15 14:45:49 · 5 answers · asked by Michelle 2

My husband does music and we want to build a shed type building (8x10 or larger) so he can use it as a studio.
Making it into a studio isn't the problem, he knows what he needs for that part of the project, but we aren't sure how to build the building itself.
We are putting it in the backyard and just want a cheap and basic design.
If anyone knows how to build one or knows of a site that has plans and all that, I would greatly appreciate it!!!

2006-10-15 14:25:08 · 5 answers · asked by dmercer12679 3

trying to refinsh cherrywood cabinets. sanded to bare wood but the wood seems to be sealed with a previous finish. urethane fish-eyes and won't level even sanding between coats. is there a primer? suggestions please

2006-10-15 14:20:08 · 4 answers · asked by Anonymous

Water has left stain running down down the vinyl siding of house where AC runoff was. I have tried CRL and bleach/water with no luck.

2006-10-15 14:13:41 · 3 answers · asked by tb2321 1

I live in an apartment with no outlet outside. I want to plug in a strand of lights for halloween. Leaving a door or window open to run an extension cord in is out of the question. I'm pretty sure I've seen things that are battery powered, but you can plug a regular socket into them and run lights outside without having anything connected inside. I forgot what they are called and if someone could help me it would be great. I just need a way to plug in the lights when there is no outlet outside at all. And I definantly can't leave a door or window cracked to slide a cord in.

2006-10-15 14:08:35 · 2 answers · asked by Anonymous

2006-10-15 14:07:05 · 3 answers · asked by Kimberlie S 1

its 32 x32 with cement floor with 2x6 posts. Its has vinyl siding attached to sheet ply wood.

2006-10-15 13:41:40 · 4 answers · asked by NARB 1

the floor is in rental prop. right now i don't have the time sand and refinish,i need advise on steps to make it look good.Thanks BB

2006-10-15 13:06:14 · 12 answers · asked by Anonymous

I recently noticed that my drapes had faded spots on them from the sun. Can I dye them myself(they are a light pink) or should I send them out somewhere? If I send them out, where? Will a dry cleaners know how to do it? they are linen drapes not silk.

2006-10-15 12:59:07 · 4 answers · asked by tootsie 5

2006-10-15 12:57:55 · 3 answers · asked by Anonymous

2006-10-15 12:55:53 · 2 answers · asked by jay5 2

It is from a Burnham furnace (boiler)

2006-10-15 12:43:35 · 3 answers · asked by Jc P 1

2006-10-15 11:46:54 · 5 answers · asked by metalbrow 1

New handyman project involves putting ceramic tile on bathroom walls. Never tried this before. Any tips or suggestions? What about a web site with do it yourself directions?

2006-10-15 11:41:27 · 10 answers · asked by Anonymous

I put a coat of urethane on a previously coated wooden bar. I had no knowledge of the type of material that had been used on it before, but prepped the surface well and applied the urethane. Now it's peeling in places and has small bubbles popping up here and there. I've used varnish before and after using the urethane I'd rather go back to varnish. So if I was to re-finish this again, without totally stripping it down....what should I use?

2006-10-15 11:32:11 · 7 answers · asked by mollyhogan 1

2006-10-15 11:09:06 · 2 answers · asked by gball13@pacbell.net 1

2006-10-15 10:39:40 · 8 answers · asked by vanessamustteach 2

The screws are out and the bracket doesn't reset.

2006-10-15 10:21:14 · 11 answers · asked by tenaciousd 6

I'm a total germ freak, grossed out at not knowing who was in there last time, and doing what.. how do you get over that fear??

2006-10-15 10:20:32 · 8 answers · asked by Smile T 1