Home & Garden - 5 November 2007

2007-11-05 14:51:57 · 11 answers · asked by kystik83 3 in Cleaning & Laundry

I am opening a new salon and spa and would like to know which detergent would be least offensive and smell the best.

2007-11-05 14:40:24 · 14 answers · asked by ಌMemsterಌ 5 in Cleaning & Laundry

A.8
B.12
C.24
D.48

2007-11-05 14:13:28 · 10 answers · asked by abeer a 1 in Decorating & Remodeling

I took the "wall" of my shower off to see what is causing it, and the pipes are leaking. I tried to use sealant and some plumbing tape.. didnt work. What else can I do? I dont want to call the plumber... it's gona cost me for sure...

2007-11-05 14:12:44 · 5 answers · asked by Mean-Streak 2 in Do It Yourself (DIY)

2007-11-05 13:40:18 · 6 answers · asked by Anonymous in Maintenance & Repairs

I want a heating source for my otherwise unheated upstairs.
I have an oil air furnace for the downstairs. Do not want ducts running thru the inside walls to the upstairs....have propane for hot water....any thoughts on Renai or Monitor heaters...propane vs. ? other sources... I have a chimney that runs upstairs also, but has the furnace and woodstove running off it downstairs. The most economical source is wanted.
Also, it will be only heating at 60 degrees. The lowest it gets in the stark winter is 38, pretty chilly sleeping !

2007-11-05 13:38:02 · 1 answers · asked by buzzword07 3 in Do It Yourself (DIY)

How do they avoid the electricity when the circuit is still on?

2007-11-05 13:31:46 · 13 answers · asked by monaya 2 in Maintenance & Repairs

help

2007-11-05 13:27:44 · 8 answers · asked by Anonymous in Other - Home & Garden

My roommates wont put the heat on until its really cold... I said its supposed to snow tomorrow they said "when we see snow it'll go on" so my response was "it takes more energy and the furnace works harder if you dont have the heat on already... more energy and the harder the furnace works, the more money we pay"... is this true? any links to prove them wrong would be awesome! thanks

2007-11-05 13:17:07 · 5 answers · asked by mperry1408 3 in Maintenance & Repairs

2007-11-05 13:06:11 · 9 answers · asked by Anonymous in Maintenance & Repairs

house keys

2007-11-05 13:01:26 · 5 answers · asked by Anonymous in Maintenance & Repairs

My daughter and I are going to quilt while I am visiting in Auckland and would like to rent a fairly high quality sewing maching.

2007-11-05 12:59:34 · 2 answers · asked by Anonymous in Other - Home & Garden

2007-11-05 12:50:22 · 9 answers · asked by Anonymous in Cleaning & Laundry

I am looking to install crown molding into my room, but not sure how to. I have a basic square room with no tricky corners. Could someone please give me some tips, explain the process, tools that will be needed, etc.? Any help would be very appreciative, thank you.

2007-11-05 12:45:43 · 4 answers · asked by kings 1 in Decorating & Remodeling

2007-11-05 12:43:25 · 10 answers · asked by Anonymous in Do It Yourself (DIY)

How much do thos fountains that run off the wall cost? I'm not thinking the WHOLE wall, just a partial part for decoration. Does anyone know the lowest cost for it?

2007-11-05 12:39:08 · 3 answers · asked by michellemisfit 1 in Decorating & Remodeling

2007-11-05 12:38:57 · 3 answers · asked by c 2 in Decorating & Remodeling

do I need permits for this in the state of california

2007-11-05 12:33:07 · 6 answers · asked by Anonymous in Do It Yourself (DIY)

Well after I complained to the contractor that the partition wall he had put up was 1 inch out of plumb over 7 foot he came out and fixed it. Well vertically anyway. In fact we he did was at halfway up the wall he re-adjusted it so it was plumb so now the wall is at a slight zigzag, not only that it is now no longer at 90 degrees with the adjoining wall and is .5 of an inch out over less than 1 foot. I complained to the owner of the company who is supposedly coming out first thing tomorrow to look at it and fix it but if I find another problem I am axing them. apparently hisguys told him that it was just the door frame that was out. Shame they left evidence behind showing the contrary

3 issues so far

Hinging the bedroom door at the wrong side so that you have to open the door full, step into the room, close the door to be able to turn the light on

Partition wall out of plumb vertically by 1 inch.

Partition wall now not at 90 degrees with adjoining wall.

2007-11-05 12:31:35 · 1 answers · asked by Mike M 1 in Decorating & Remodeling

just a list will work.

2007-11-05 12:23:57 · 4 answers · asked by MarieKatie 1 in Maintenance & Repairs

It needs somekind of drainage? Do I need to resurface it on a slant or what?

2007-11-05 12:22:50 · 2 answers · asked by kindclinton2000 1 in Maintenance & Repairs

2007-11-05 12:12:30 · 3 answers · asked by PT 1 in Do It Yourself (DIY)

I dont know if its got a name but stuff like using vinegar and water to clean windows and baking soda to clean kettles. I find it really annoying that people would do this sort of thing lol! Whats wrong with a quick spray of Mr Muscle and a cloth, rather than dogs urine applied with a toothbrush?

2007-11-05 12:08:03 · 11 answers · asked by Deano 2 in Cleaning & Laundry

what kind of washing up liquid do they use on how clean is your house

2007-11-05 12:07:56 · 2 answers · asked by Anonymous in Cleaning & Laundry

2007-11-05 12:07:10 · 1 answers · asked by lola 1 in Decorating & Remodeling

I would like to install a hanging light on my ceiling but the cord that the light comes with is a plug made for an outlet. Obviously the ceiling does not have an outlet (it's just the wires where lighting fixtures are connected). How am I supposed to install this?

Will I need a different cord (one that will connect directly to the electrical wiring of the light fixtures) or is it possible to install an outlet there (but if this is possible, won't it look bad since the hole is circular while the outlets would be in a rectangular shape)?

Thanks!

*I know my terminology and explanation is probably VERY BAD, I'm not good with this kind of stuff, sorry.

2007-11-05 12:06:24 · 4 answers · asked by Jon A 2 in Maintenance & Repairs

If you look at your average stapling maching, the silver part which go under the paper you're stapling has two impressions in it. Most people use the impression that make both ends of the staples curl inward... Well if you spin around the metallic bit you can use the other part which makes both ends bend outwards... but my question is.

what is the use of the other pattern? there must be some reason why all standard staplers have both styles?

2007-11-05 12:06:08 · 1 answers · asked by ... 3 in Other - Home & Garden

2007-11-05 12:04:55 · 1 answers · asked by Bill G 2 in Decorating & Remodeling

My contractor fell through the attic and created a 4x4 hole in the ceiling. He replaced the drywall and did the tapping and joint compond at least three times however I can still see the flashing effect, or the lines of the new drywall. We primed it with Kilz water base and a semi mate at least twice. Have any ideas what the heck the problem is?

2007-11-05 11:59:59 · 3 answers · asked by manpsych 2 in Do It Yourself (DIY)

i need a long lasting durtable strong food processor where can i find one either in a store or online for a good price-a price that that food processor would be worth for

i live in texas

2007-11-05 11:54:54 · 3 answers · asked by heart_star_bling 2 in Other - Home & Garden