English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Other - Hardware - December 2006

[Selected]: All categories Computers & Internet Hardware Other - Hardware

it realy dosnt work because of how many there are.what is a good way to clean it,or at least make it work???

2006-12-16 05:03:43 · 1 answers · asked by artusemail 2

I have dvd shrink and decrypter and Nero with my DVD burner. I am just not knowledgeable of how they work.

2006-12-16 04:38:42 · 1 answers · asked by Mark M 1

2006-12-16 03:36:25 · 3 answers · asked by scott t 1

I'm pretty up with the whole PC lingo shebang but I haven't really tried to make such extensive modifications before. I want to incorporate a liquid coolant system in the base unit (instead of the tornado-like fan) but don't know how to go about it.
a)where do i get all the coolant equipment?
b)can any base unit have one installed?
c)can you get it from delland have them install it when the computer is built?
I also need to know if I can reuse some of the parts of my old comp that are still working perfectly. The new comp will have a dual core processor and therefore a completely different motherboard and memory - canI therefore take out my 2nd unused hard drive out of my old comp and install it in the new computer? Also can the same be done with the Floppy drive and the flash-opticle drive hub (the large collection of holes you can put flash cards and memory sticks into). I also have another opticle DVD drive I'd like to take out and put in my new one. Appreciate any help!!!

2006-12-16 03:19:13 · 4 answers · asked by lord_pagren 1

I've been trying to transfer music into a micro sd card that fits into my cell phone but keep getting the error message__"card is write protected" and told to remove protection. Ok, how do I do that?
I tried to format the card via a card reader and get the same message "write protected" The phone indicates that it is formatted but will not accept music. I have taken a couple of pix that are stored on the card though?

What gives???????????????

2006-12-16 02:56:22 · 3 answers · asked by Anonymous

I have a Imation DVD-R, with 4.7 gigabytes of data, and 2.7 hours of video. On a CD, you can just copy and paste the files and then write them on to the CD. I tried doing that with the DVD-R, cause I need the extra space, but it kept on saying that there was an error when I click paste to move the file to the DVD-R, and when I go to my computer, it says that there is no space used and no space left! Can I copy regular files, like Word Documents onto a DVD-R and if I can how. Please Help!!!!

Also Whats the difference between a DVD-R and a DVD+R

2006-12-16 02:15:42 · 5 answers · asked by Richard 3

please provide detail

2006-12-15 22:55:50 · 4 answers · asked by Anonymous

My computer has RAM 96.0MB but i hav installed 128MB RAM but my Schools Computer Shows 128MB RAM and they hav Installed 128 MB RAM can anyone help.

2006-12-15 22:45:39 · 8 answers · asked by Shobit Sharma 1

I heard that any (9 pin) PC mouse can easy be connected on Amiga (A1200).
How can I upgrade PC mouse so I could connect it to my Amiga ?

2006-12-15 21:32:15 · 2 answers · asked by r_horvat 1

hey, i need help, like rite now. please help..

i had 2 memory cards of 256mb ddr ram in my computer.

i added about 512 more, it was working fine. w/ 768mb.

i have 4 slots, two blue and two black. so i try to add another 256 and third black slot, and my computer shut down. started acting weird. so i removed the 256 from black slot. and it's working fine?

was 1024mb ram too much for my computer???

how do you find out that?

2006-12-15 20:47:54 · 4 answers · asked by S. 1

2006-12-15 19:29:04 · 10 answers · asked by Friend_Ryp 1

i have to copy my old harddisk into new harddisk

2006-12-15 17:38:26 · 3 answers · asked by Anonymous

2006-12-15 17:27:08 · 3 answers · asked by JCROSS_3 2

Recently i bought a new IDE Hard disk. How i connect them, 'coz my previous IDE cable has only one connector(the Master). Can i use EIDE cable(that comes with my DVD-Writer) instead of old IDE cable to connect both hard disks? And i want to know the jumper settings(no manual comes with HDD). New hard disk is Western Digital 80GB, previoius was 40GB Seagate. Actually i've used the EIDE cable but after this my system is'nt booting. One more thing "when i was removing my old hard disk a seal on right hand side(silver colored) was removed accidentely after metal friction. Under this seal there is a hole, what that? is it crucial?
should i close it again with tape!? thanks!

2006-12-15 17:15:27 · 5 answers · asked by iMaXX 4

I have 1 gb pen drive & i want to protect it ?

2006-12-15 16:39:56 · 4 answers · asked by Ayaz 1

i put the computer in stand by mode, but when i shake the mouse, nothing happens, I press all the buttons on the keyboard, i even press the power button again, but it just doesn't want to come out of the stan dbye mode, can someone please help me out on this

2006-12-15 16:37:05 · 2 answers · asked by confused 2

2006-12-15 16:09:19 · 2 answers · asked by Patrick 3

I've just bought call of duty (PC) game and i cant play it due its says i need to update all drivers for my video card from the manufacturers site, i've been having problems trying to find the manufacturer of my video card and
i've throughouly looked through device manager yet nothing but however there are problems with 2 devices the first being video controller (VGA compatible)which is located in "other devices" and MPU-401 compatible MIDI device located in sound,video and game controllers, so if anyone know the answer to this problem please help me, Thanx

2006-12-15 14:30:06 · 2 answers · asked by john s 1

2006-12-15 13:48:01 · 1 answers · asked by EVER 2

Which one to choose I would like a laptop to move around the house but I do not get out of the house alot I would like a desktop because it is upgradedable especially the video card which I would like to play at least low graphical game

2006-12-15 12:55:51 · 9 answers · asked by black white boy 1

Well the reason is my Flat Screen HD CRT Randomly has Bars at the bottom

2006-12-15 12:13:07 · 6 answers · asked by Anonymous

Ok I need to know if i fried my video card. I just got it in the mail and I opened it up. I NEVER touched it with my hands (It had a plastic tray on the bottom) and I put it right back in the box. I closed the box and put it in the corner of the table. I then heard a quick, little shock. I dont know where it came from but if I never took it out of the origanal tray could it fry?

2006-12-15 10:55:49 · 3 answers · asked by maytag 1

I have a Sony Vaio desktop from 2001-ish (don't know exact date or model) and it's slow. I would like to make it faster but I don't know what to do first. I have Windows 2000, Pentium 3, and 1000mHz. I hear that new RAM might have to be installed and maybe a graphics card for games. If I buy a minimum graphics card and RAM, will this increase my computer's speed and efficiency? Also, if I need to have someone install it, does Geek Squad/Fry's/MicroCenter do a good job with this?

2006-12-15 10:42:08 · 13 answers · asked by dcvanta 2

reformat ur C drive and reinstall the OS
how do i do this?

2006-12-15 09:55:49 · 2 answers · asked by mario p 1

It's new, still in box, 300 gigs total. I only need 200 gigs to back up my PC (if it were full),, that would leave 100 gigs for something else,, and I wonder can the PC use that 100 gigs to store a folder from My Documents,, for example,, My Music (which has about 60 gigs in the folder already). Can I transfer the whole Music file to the external drive and use it just like I always do?

2006-12-15 09:50:35 · 6 answers · asked by bonobo77 2

i always wondered if there is a program that can make your pc like the fist day you started it. I know there is a system restore. But it doesnt allow you to restore it all the way. just 1 or 2 months earlier.I bougth my on june. I want it to go back to july because there are erreos and my pc lags. plz anyoe know a program.

2006-12-15 09:45:20 · 3 answers · asked by mario p 1

I was on my P.C and a blue screen popped up and said there was a problem with Divice Driver(stop error) and had it shut down.
What does that mean?
And what is a Divice Driver?

Thanks X

2006-12-15 09:34:32 · 2 answers · asked by Nic 3

fedest.com, questions and answers