Ford

whats the difference between 1.7 rockers an1.6 rockers

2006-11-06 06:18:28 · 5 answers · asked by slick 50 1

When I have drove the car,and park it.The exhaust is popping,as the car cools down.I have never heard this before til they put Flowmasters on it.Do I need to be concerned?

2006-11-06 04:05:04 · 9 answers · asked by Tinkerbell82 1

I thought if the alternater was bad, I would have problems when the truck was running. I am not getting this. I know it's either the battery or alternater, but I thought the way you figured out the difference was if it died when it was turned off then it was the battery and if it died when it was running it was the alternater. Or does the alternater pull charge from the battery and if the alt isn't working it won't pull anything from the battery. Can someone help me?

2006-11-06 03:02:10 · 12 answers · asked by qttrish 1

not checked thermostat yet or coolant tank cap but levels are fine does the hot to cold dial/switch directly control that solenoid valve (the one under the windscreen)

2006-11-06 02:32:21 · 3 answers · asked by luke g 1

2006-11-05 17:13:37 · 3 answers · asked by Francis s 2

i am looking for a supercharger kit for a 2006 f150 with the 4.2l v6..i have been looking around and havent found anything yet..also does the kits i have seen for the older 4.2 fit

2006-11-05 06:30:35 · 4 answers · asked by mark d 1

I have problems starting my Truck and i was told it was the starter and the flywheel was used up and needed both new installed. I have a starter now
1 how much does a flywheel cost me and when i get it put in
2 will they have to take out my Engine?
3 do i have to get a new flywheel installed before the new starter goes in?
4 do they have to be installed at the same time?
5 what is the price range for such labor? What for only flywheel installation?
ARE THERE ANY MECHANICS OUT THERE PLEASE HELP

2006-11-05 06:18:39 · 10 answers · asked by Anonymous

Mustang GT or Mustang 5.0L

Stock

2006-11-05 06:07:06 · 9 answers · asked by S--slick 4

ive got a new carb and distributer. heads could be wore out but dont know. engine is rebuilt and doesnt have many miles. but i sprung a bad oil leak and ran it two quarts low for a day.mabye 20 miles. heads are not rebuilt.

2006-11-05 05:47:41 · 8 answers · asked by Anonymous

I have a 93 MUSTANG GT,50,000 miles,I put the car in storage early this year due to myself having surgery and being unable to drive anymore this year(before snow falls)I went to start it like i always do once a month,dead battery(was replaced new in Jan. 06 )took battery back,got a new one,2 weeks later,went to satrt the car,dead battery(put charger on this time,came back to full charge over night)after starting the car I noticed the dome light on,would not turn off,removed the light(also removed the one when you lift the hatch,it was on also),but whats causing the problem? any help before I take it to the garage,and to save me some money?? thanks

2006-11-05 04:56:20 · 4 answers · asked by kkahn9dodge 5

as well as companys that offer upgrade parts for this type of engine,these old ford trucks are all steel and tuff as nails no plastic junk ,but they love gas, so far i have looked at a offenhouser intake that claims to improve fuel economy, i was thinking maybe to mix a newer aluminum intake with a factory fuel rail injection system and wire in the computor and other parts from a later model truck motor, i realize i would have to boar the holes for the injectors and build the air inlet control parts from other units, but all in all can this be done and what other problems could i run in to, also the fire to the plugs ? maybe a mag type distributor or what, iv'e had this truck since back when i was in school and really want the mpg to improve as well as dependable for long trips, later i want to give to my son when everything is problem free, if anyone out their can give me solid info it would really make my day, thanks so much for your help.

2006-11-05 04:05:18 · 13 answers · asked by JALISCO 2

2006-11-05 02:07:06 · 7 answers · asked by Anonymous

Have a 1999 3.8 mustang (crap engine)...wanted to know if it would be difficult to drop a 4.6 in it and ballpark cost on new engine. What major / minor modifications would I have to do? Thanks!

2006-11-04 19:51:10 · 6 answers · asked by jay611j 1

eyy all i was just wondering because i might be buying a Ford XR6 can i put a turbo into it after i buy it? and another question can you put a turbo attached to ANOTHER turbo so theres 2 turbos and would that make it any faster?

2006-11-04 19:42:02 · 6 answers · asked by kylexx4xxever 2

How fast?

2006-11-04 16:59:55 · 6 answers · asked by S--slick 4

I have a 1998 f-150. Will a 2003-2005 f-150engine fit?

2006-11-04 16:54:48 · 7 answers · asked by Anonymous

I checked the oil and it was milky looking. Checked the coolant and there was a layer of oil on the top..... the car runs fine once it gets going. clue?

2006-11-04 16:52:56 · 6 answers · asked by jay611j 1

I am buying this mustang from a friend and he only wants a small amount for it ($1150.00) But I would really like to know how much he is jipping himself so I can give him something close to the real cost (if I can). It would be really nice if someone could help me out here... Oh, and it's condition is good, leather interior there are a few chips in the pain around worn areas but it's nothing that can not be fixed. The car has rear wheel stablizers and its engine has been completely rebuilt. That is pretty much all I know about the car. Hope some one knows the answer... :)

2006-11-04 15:13:18 · 8 answers · asked by staceywesterncheer 1

2006-11-04 13:15:18 · 15 answers · asked by Aaron B 1

I drive a Ford F150 Extended Cab Pickup Truck. I have plenty of fluid in my radiator. The pressure in the lines seems ok. The heater core in and out is both hot and under pressure. I don't know what else I can check without spending thousands to do it. Someone said it might be in the knob, but that it would cost around $700. to check that.

2006-11-04 11:21:13 · 11 answers · asked by qttrish 1

I have a 1972 Ford pickup and I think the float is stuck in the carburetor, is there a way to fix it without tearing it COMPLETELY apart??

2006-11-04 08:26:01 · 4 answers · asked by mooo 1

2006-11-04 07:08:44 · 6 answers · asked by keith h 1

I am trying to locate the serial numbers on the frame rail and also on the cab. any help would be greatly appreciated

2006-11-04 05:23:37 · 6 answers · asked by Harold S 1

2006-11-04 02:42:39 · 21 answers · asked by Anonymous

Does anyone know what site I can go to to fine the fair market value of a 2002 ford escape?

2006-11-04 01:47:10 · 4 answers · asked by Anonymous

I have a red brake light and an antilock brake light on in my Aerostar van.

2006-11-03 23:43:06 · 12 answers · asked by Anonymous

car is NOT overheating

2006-11-03 21:32:47 · 8 answers · asked by Anonymous

I just replaced the heater core on my truck. The day after I was almost forced into a accident causing me to jam on my brakes. Since then when I accelerate in 1st, 2nd, or 3rd at the top of the gear/rpm I can hear a hum which I believe to be coming from the center of the engine, I can't really tell though obviously because I'm driving when this noise occurs. So being that it stops humming when I up shift I thought maybe the transmission fluid was low or something. That would bring me to this silly qeustion of where is the dip stick and/or resevoir for the transmission fluid. I looked in the normal places it would be and magically it is nowhere to be found. So if there is a knowledgeble soul out there please help soon

2006-11-03 20:15:58 · 5 answers · asked by BLEST ELUSIVE 1

stik over auto?

2006-11-03 17:22:09 · 8 answers · asked by Anonymous

I am looking for an armrest for a 1972 grand torino sport. i am looking for an origional one for a two door in the origional green color. if anyone has one or knows where to find it, i would appreciate it.

2006-11-03 16:03:35 · 2 answers · asked by nschrepfer 1