English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Ford

[Selected]: All categories Cars & Transportation Car Makes Ford

it will start sometimes and then not already cleaned battery cables

2006-11-01 04:38:18 · 6 answers · asked by robert m 1

i suddenly lost power, if i floored it-car would go, but not maintain rpms at any degree...seemed to have fixed that,however,now will not go into gear...trying to diagnose problem???? am wondering if too much tranny fluid
? or what?(automatic trans)

2006-11-01 03:01:56 · 6 answers · asked by g-rated 1

I have done the following, tested battery=12.45v, tested starter out of car, it worked fine, replaced the ignition switch, actuated the pin on the ignition switch and still it will not start, working by myself it is impossible to tell if there is a click when key is turned because of that annoying dinging bell when key is turned. There is no "relay" between the battery and the starter. After putting the starter back in the car I did get the car started and thought it was all good. Tried it again and it would not start. Any help would be appreciated.

2006-11-01 02:40:49 · 2 answers · asked by oldhippie_67 1

Where do I put the oil at and where do I put the transmission fluid does not look like a regular car lol? I see a blue dipstick and a all metal one then on the top of my head the is a thing that looks like a gascap with a hose connected 2 it? Just got it? both dipsticks say oil though wierd?

2006-11-01 02:24:51 · 3 answers · asked by Allabove 1

It is a 6 cylinder automatic and only has 31,000 miles on it. Has been taken to many repair shops and still can't figure out what is wrong. I can't find any info on the internet.

2006-10-31 21:27:12 · 7 answers · asked by Apple Freak 2

Magnaflow,Bassanni,Flowmaster,Borla,etc. which would you choose and why? Remember base your decision on sound first! any good sites to listen to diff types?

2006-10-31 14:46:06 · 10 answers · asked by mustang elite 2

2006-10-31 14:45:40 · 9 answers · asked by Hasana H 1

If you have some of these parts or know where I may find them besides ebay, I continuously look there too. thanks

2006-10-31 13:25:55 · 4 answers · asked by michael c 2

2006-10-31 11:20:05 · 2 answers · asked by gunngrave 1

Did you know that in the movie "cars" the neon lights on FLO'S V8 CAFE flash the firing order of a Ford flat head v8 ???

2006-10-31 09:57:01 · 4 answers · asked by tronary 7

Did you know that in the movie "cars" the neon lights on FLO'S V8 CAFE flash the firing order of a Ford flat head v8 ???

2006-10-31 08:41:55 · 5 answers · asked by tronary 7

I will be traveling at say 60MPH all of a sudden it sounds like it goes to two cylinders, slows right down to about 30 then fixes its self. Alternativley as it starts missing if I change down a gear its fine straight away, but then starts again in about two minutes. It also stops if I stop and start accelerating three times!??? What the hell is going on?

2006-10-31 08:37:06 · 7 answers · asked by TR 2

I get a spurious thud on the right side of a 1995 Taurus SHO 4 door 3.? liter. I push down on the trunk and do not get excess bouncing, so shocks appear o.k.
Is there anything about FWD cars, that could cause this spurious noise? Where can I find all the outstanding TSB's for this model?

Thanx,

Dick

2006-10-31 01:40:01 · 4 answers · asked by D L 2

the 240 and 300 are the same external size and I think they put a 240 in a car in 65 , but they were big truck motors . Ford put the 200 / 250 cid motors in the cars . I could be wrong on a rarity on this one , but I know it was not common if at all .


Please tell me the make , model , and year of the car .

.

2006-10-31 01:33:59 · 3 answers · asked by Anonymous

I have a 2004 automatic truck, and would like to get better mileage.

2006-10-30 22:17:05 · 8 answers · asked by Anonymous

My truck is a Camper Special. I've tried to use a blanket as a seat cover before but it always slides down. I want it to look nice and tight but the seat doesn't fold forward so it's hard to tuck the edges of the blanket in. Should I remove the seat to do this, and if so, how?

2006-10-30 21:05:48 · 5 answers · asked by Qando 2

I know where it is located, but how do i change it?

2006-10-30 19:33:24 · 3 answers · asked by deepseafishin2003 1

the ford focus has alot of problems with it, dont buy one if you are planning to. it is very problematic, and it cost alot of money to fix every little lagging part.

2006-10-30 18:07:00 · 7 answers · asked by enano 4

2006-10-30 17:02:05 · 5 answers · asked by giraldoxr 1

2006-10-30 16:16:14 · 14 answers · asked by Thomas H 4

2006-10-30 15:31:36 · 11 answers · asked by Anonymous

I bought the car from a guy that was spraying thru the box i eleminated the fuel inj. and put on the carb and nos plate. He was spraying 150 through the box. I know the plate is a more efficeint way to get more hp's from the juice so the question is 175hp or 225hp too much for a stock 90 block the top has nos gaskets gt40 heads and all and 650 dble pumper HELP ME PLEASE !!!!!!!!! or should i back it down to a 125

2006-10-30 14:44:47 · 7 answers · asked by lisa l 2

My truck keeps giving a DTC of both banks running lean. What could trigger this? MAS? Thanks in advance!

2006-10-30 13:51:08 · 10 answers · asked by Katmando 3

2006-10-30 13:10:50 · 17 answers · asked by Anonymous

I installed a jasper engine in my 86 broncoll about 60k miles ago and after it has set for 3 months I started it right up let it warm up then after I started down the road the lifters started rattling and I had no oil pressure so I shut it off let it set then started it up and headed back home it starts fine witl oil pressure than after you rev it , it starts to lower then it goes back up but not as high then rev it again and it lowers as you rev than goes back up until it progressively gets to low to fill the lifters. i think it is something to do with the oil pump but these engines are such a bear to pull out I wanted to get some advice before I pull it out,,l any thoughts? thanks

2006-10-30 13:02:54 · 4 answers · asked by trialsguy 1

I am trying to find out exactly where the flasher unit is. I have been told it is under the dashboard but, where under the dash is it? I have taken everything on the dashboard off and can't find out where that pesky round rascal is hiden.

2006-10-30 12:45:55 · 3 answers · asked by dallasdailynews 1

I have heard good things, but I cant find the car anywhere -does anyone know any scope?

2006-10-30 06:10:09 · 6 answers · asked by Devon P 1

fedest.com, questions and answers