Engineering - March 2007

Electronics design

2007-03-28 18:42:00 · 1 answers · asked by Anonymous

2007-03-28 17:46:43 · 1 answers · asked by rsn.nitjsr 1

2007-03-28 16:51:21 · 3 answers · asked by rey 2

what is the voltage across the light bulb?
please tell me how u did it too!
Thanks ALOT!

2007-03-28 16:26:57 · 2 answers · asked by Chocogal 7

Is stainless steel 304 magnetic? What are its properties?

2007-03-28 15:49:06 · 4 answers · asked by Joey 1

i thought current killed not voltage
(and as it seemed stun guns don't have any current at all)

2007-03-28 15:09:23 · 2 answers · asked by macgyver 1

I have tried to get contact but to no avail. Even through the Association of Consulting Engineers of Nigeria. Please anyone tohelp write to my email baralainso@yahoo.co.uk

2007-03-28 14:18:13 · 3 answers · asked by Play 11 best, and not best 11. 1

Compute the voltage drop along a 26-m length of household no. 14 copper wire (used in 15-A circuits). The wire has diameter 1.628mm and carries a 12-A current.

Please show work, so I can understand how to solve similar problems.

2007-03-28 13:57:45 · 2 answers · asked by vtchick1441 1

the cheaper the better, of course

2007-03-28 13:55:15 · 5 answers · asked by Anonymous

2007-03-28 13:54:49 · 4 answers · asked by alex d 1

2007-03-28 13:35:52 · 2 answers · asked by humtydumty 1

What do W1-2-3 and U1-2-3 refer to on a 3 phase motor winding diagram, and how do you know whether it is connected in star or delta.? Any replies most welcome.

2007-03-28 12:35:34 · 4 answers · asked by wisernow 3

2007-03-28 12:26:53 · 9 answers · asked by krystal 1

2007-03-28 12:26:10 · 2 answers · asked by Anonymous

just wondering

2007-03-28 12:14:57 · 3 answers · asked by macgyver 1

ok 4.1g of Cr is heated with 9.3g of Cl2 what mass CrCl3 will be produced. i got 12.3 when i converted 4.1g of Cr and 13.9 when i converted 9.3g of Cl2.....is that it or do i add them together?

2007-03-28 12:04:35 · 1 answers · asked by Kelsey S 1

Hi, im john and im in the 7th grade. i need to know for a science project, what does "amp" mean on a circuit breaker? and what do the numbers by the word amp mean. OHH and i need this answered BEFORE friday 3/30/07.

Thank you, John

2007-03-28 11:48:42 · 3 answers · asked by johnnny MANN 1

thank u

2007-03-28 11:44:51 · 9 answers · asked by element69ca 1

Find the Volume of the solid described. Give exact answers as reduced fractions in terms of pi.

1. The base is a circle with radius a. Find the volume if cross sections perpendicular are squares.

2. The base is the region enclosed by a circle of radius 7cm: find the volume if cross sections perpendicular to a fixed diameter are equilateral triangles.

3. Base is region bounded by y=1/x, y=0, x=1, x=4 and cross sections perpendicular to the x-axis are isosceles right triangles with hypotenuse in the xy-plane.

4. The base of a solid is bounded by x=y^2 and x=4. Find the volume if cross sections are:
a) perp. to -axis and are isosceles triangles with base in xy-plane and height is 1/2 of base.
b) perp. to x-axis and are ososceles right triangles with one =~ side in the xy-plane.
c) perp. to y-axis and are squares with one side in the xy-plane.
d) perp. to y-axis and are semicircles with diameter on xy-plane.

please please help me...i am pleading. you have no idea. help... :(

2007-03-28 11:36:19 · 1 answers · asked by Seanoso88 1

I am looking for a design to build an Electric Piston with a 3 to 6 inch stork?

This is going to be used to build a Female pleasure device.

2007-03-28 10:46:28 · 3 answers · asked by luvscuban2002 1

2007-03-28 10:21:51 · 7 answers · asked by DEDE 1

1 . if I want to compress 22.4 Litres of Oxygen gas at N.T.P. ( one mole i.e. 32 gm) to say 20 atmospq. pressure
how much energy will be consumed in doing that.
Also if I want to compress Hydrogen (without liquification) what will be the enegy required ( from 22.4 ltrs at N.T.P. to 20 atm pressure.
2. How much thick Steel cylinder is required sustain this much pressure ( 20 atm) What will be the weight of steel cylinder which can contain 22.4 ltrs of original oxygen compressed to 20 atm.
3.
Relation between one atmossperic pressure to onr bar pressure or one PSI pressure

2007-03-28 10:05:35 · 1 answers · asked by mahesh asker 1

2007-03-28 09:46:53 · 8 answers · asked by STORMY K 3

* in a simple copy machine, a stpo signal, S, is to be generated to stop the machie operation and turn on an indicator light whenever either of the following conditions exists:
1.there is no paper in the paper try
2.two switches in the paper path are activated,indicating a paper jam
* the presence of paper in the tray is indicated by a HIGH at logic signal P
* each switch produces a logic signal(Q and R) that go HIGH whenever paper is passing over the switch to activate it.


* design the logic circuit to produce a HIGH at output signal S for the stated conditions: simplify the expression and implement the circuit in gates.

2007-03-28 09:33:54 · 2 answers · asked by The Genius 1

hey

i'm doing this project were i have to create an invention. my invention includes using platic.

does anyone know of a name or a type of plastic that is transparent, light, and strong


thanx

2007-03-28 09:25:44 · 3 answers · asked by nadine 1

2007-03-28 09:18:19 · 2 answers · asked by Marty M 1

2007-03-28 09:12:37 · 6 answers · asked by fritz020202 1

Is the convection better or magnification of the sun? It has to cook an eight inch pizza in thirty minuts.

2007-03-28 09:10:43 · 2 answers · asked by Anonymous

ok so im buliding a go kart right. i dont know wat 2 make it out of. i would like somthing that is at least 3 of these things.

1)light
2)easy to work with
3)cheap
4)faliry strong
5)paintable

Thanks
Mr. J

2007-03-28 09:06:44 · 3 answers · asked by Anonymous

2007-03-28 09:02:15 · 1 answers · asked by ramohelas17 1