Maintenance & Repairs - December 2007

This stuff exists. I heard of it on a radio fix up show. Forget the name.

2007-12-02 07:12:29 · 3 answers · asked by caelach 2

it is an American Standard, Fredom 80, single stage. for the home. about 5 yrs. old
first the problem: the flame would die out in the middle of the cycle then it won't relight. some times the flame stays on for hours (becuase when it lights we try to get all we can before we have to turn it off). i replaced the Flame Sensor(thermal couple?) furnace worked for rest of day but still having problems.once in a while the ignitor will be glowing and the furnace won't light off the get.
ALSO: somtimes i get an error code, for- open tempreture limit circuit.

thanx for any help or suggestions!

2007-12-02 06:12:08 · 5 answers · asked by Anonymous

Just noticed a tile has slid off due to high winds. It's a high roof,but tile just above flat roofed extension. I know its not a big job to replace - but I'm not going up there! How much should I pay in SEast?

2007-12-02 06:10:10 · 11 answers · asked by Anonymous

It has two handle sizes 3 1/2 and 4 1/2.
I have looked at various websites that have a handle I like in one of these sizes, but not one to match the other size. Any advice on where I can go or how to solve this problem?

2007-12-02 06:05:50 · 5 answers · asked by s s 3

The "ceiling" cracked and WATER dripped through it a short time ago. I have looked through the YELLOW PAGES, asked other people and looked through "advice columns," but to no avail. Please, please help me with this most "serious matter."

2007-12-02 05:46:14 · 1 answers · asked by In God We Trust 7

2007-12-02 05:29:09 · 4 answers · asked by Joanna S 2

theres a business (builders merchant) across the road and the alarms going off, its a pain in the backside as i have young kids, plus its giving me a headache, who do you call in these circumstances ? (theres no-one there) or do we have to put up with it?

2007-12-02 05:06:53 · 14 answers · asked by Anonymous

2007-12-02 04:48:14 · 7 answers · asked by stpeteluis 1

2007-12-02 03:14:10 · 14 answers · asked by Turgid Girth 2

I need advice on how to fix this problem.... I have very low HOT water pressure at my kitchen sink, It is good everywhere else as well as the COLD water prussure in the kitchen is perefect, any Ideas before I have to call a Plummer?????

2007-12-02 03:05:00 · 5 answers · asked by ♥Jennifer♥ 4

if the gas does leak,does it sink down or rise up...where would you place a detector?

2007-12-02 02:22:33 · 6 answers · asked by Anonymous

Well my mom cant get our eletrical fire place on but can get the pilot light on please help? Im for real its not a blond joke or anything its for real

2007-12-02 01:29:10 · 6 answers · asked by Anonymous

I heard bleach is good. Is there any good enzyme cleaner out there?

2007-12-02 00:50:49 · 3 answers · asked by coach 1

2007-12-01 17:41:37 · 5 answers · asked by Anonymous

I have 2 radiators in adjacent rooms, one radiator works fine, but the other is ice cold. I tried bleeding the cold one but I heard no air pressure being relesase however it dripped water. What's going on here?

2007-12-01 17:39:54 · 3 answers · asked by Aaron F 2

2007-12-01 17:36:35 · 9 answers · asked by Mirando M 1

It is a timed sound and it sounds like a grinding or rattling. It doesn't have an ice machine. The sound just recently started. and is really irritating and seems to be located at the back of the fridge at the top. I'm associating it with the thermostat but it doesn't always come on in regular intravels so really unsure.

2007-12-01 17:08:54 · 3 answers · asked by udontneedtoknow 2

A few seconds later the blower comes on. Pilot light is still lit. There is 24 volts across the orange and blue wires. 9 volts across the blue and red wires. 12 volts across the orange and red wires. Do I need a new gas valve or maybe the intermittent pilot igniter control? or something else.

2007-12-01 16:46:14 · 2 answers · asked by doc 1

my sewer pump pushes the waste up from my basement to the sanitary sewer.when the wind is blowing from a certain direction, the house smells of sewer waste.what could be causing this problem?

2007-12-01 15:34:29 · 3 answers · asked by nanashirley 2

i just press the lock button but now the oven is locked i dont know how to open the door lock

2007-12-01 14:59:31 · 5 answers · asked by Smart guy 2

Imagine your girlfriend comes over and hangs out, until she looks around and sees dust all over the place. "Oh my God, this is ugly!" and leaves you. Does having a dusty home make a bad impression on your friends and family? We have quite a dusty house, have one cat, and we cant seem to find a good air purifier (or something like that). And we cant really find a way to clean the air filter (built in for the AC). It's not "dangeroulsy dusty" but it's pretty dusty. Can you help with any of the questions. It'll be much appreciated.

2007-12-01 14:25:19 · 10 answers · asked by Anonymous

These cushions are amde of artificial cotton stuffed into cloth. My sofa makes a good bed :) but it kind uncomfortable to sit. I want to make it justa little bit firmer to give a good hold while sitting and not sink too deep. Thanks.

2007-12-01 14:22:49 · 2 answers · asked by gr8ergood 2

I have a wire going to a lamp post in my yard. It has worked fine for the past 4 years, but has been there much longer. Just now, it stopped working, no power at light. I checked the wire and the power stopped about 20 feet from the junction box going to light. I then tried to repair it by splicing in new wire and found that some of the wire was corroded and wet. The wire was just buried underground, not in a pipe or anything, what is the proper way to do it when I replace it. I dont even know if it is outside wiring that was used... Thanks

2007-12-01 14:00:13 · 6 answers · asked by Mike D 2

We have a propane furnace. It won't kick on unless we manually reset it. Often it needs to be reset several times before the blower finally starts up.
I have changed the batteries in the thermostat and the thermostat itself seems to be working fine. The glow plug works, propane is getting to the furnace.
It just won't turn on unless we reset it.

Does anyone know what this could mean? Is there a DIY solution to this problem?

2007-12-01 13:55:57 · 4 answers · asked by chimomx3 2

I have a couple of tiles that have fell off and need to be put back on, what type glue do you apply to make them stick. They fell off due to foundation problems which is now fixed.

2007-12-01 13:29:09 · 11 answers · asked by Anonymous

I have spent four week trying to get the service department to fix their dishwasher. Only to have tohave them come back because they got the wrong part. while this was happening the dorr of the fridge fell off. If you go to sear THEY DO NOT STAND BEHIND THEIR PRODUCTS. But these appliances are only 18 month old. What was your experience with Sears?

2007-12-01 13:25:21 · 9 answers · asked by copestir 7

There is even a tax write off on this item.

2007-12-01 13:22:39 · 4 answers · asked by Anonymous

I bought a house that already had snow melt cables on the roof, but I don't know the proper way to use them. I thought I could get away with having them on intermitently, but I still got huge ice dams. Do I have to leave them on basically 24/7 during the winter.

2007-12-01 12:23:41 · 3 answers · asked by marius1997 2

answer from an expert please

2007-12-01 12:21:15 · 7 answers · asked by gapo2005 1

2007-12-01 12:01:22 · 3 answers · asked by RBP 1